Today's Message Index:
----------------------
1. 04:38 AM - Re: changing bungee (Geoff Heap)
2. 04:43 AM - Test (Zed Smith)
3. 05:05 AM - Another test (Zed Smith)
4. 05:34 AM - Re: Another test (Larry)
5. 05:35 AM - Re: Another test (John Bolding)
6. 05:35 AM - Re: Another test (Randall J. Hebert)
7. 06:08 AM - Reason for the test (Zed Smith)
8. 01:42 PM - Re: Gross weight? (kmccune)
9. 05:59 PM - Zenith CH750 Detail Pictures (Stefan)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: changing bungee |
Bill. You can do this for lack of a better tool. Attached is a photo of a Breaker
bar I use. 1/2" I think. I cut the handle down to allow use while my rotax
912 is still installed. I cut it to suit so that it just misses everything. One
hand has the necessary leverage to lift on and off. You have to slip the bungee
onto the tool before lowering it. Installing a new one is easier. I have no
plans on buying a tool as this works fine. I havn't tried it yet with all the
hoses and cables in place....Geoff
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p 7864#207864
Attachments:
http://forums.matronics.com//files/engine_mount_8_130.jpg
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
do not archive
Test
Thanks,
Zed
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
do not archive
For some reason this just isn't working properly!
Regards,
Zed
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Another test |
Looks like it is. I can read it. Larry
Zed Smith wrote:
>
> do not archive
>
> For some reason this just isn't working properly!
>
> Regards,
> Zed
>
>
>
> ------------------------------------------------------------------------
>
>
> Checked by AVG - http://www.avg.com
>
>
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Another test |
I'm reading you 5 x 5 Zed
John
----- Original Message -----
From: "Zed Smith" <zsmith3rd@earthlink.net>
Sent: Wednesday, October 08, 2008 7:05 AM
Subject: Zenith701801-List: Another test
> <zsmith3rd@earthlink.net>
>
> do not archive
>
> For some reason this just isn't working properly!
>
> Regards,
> Zed
>
>
>
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Zed
What are you testing?
They all get posted
DO NOT ARCHIVE
Randall J Hebert
do not archive
For some reason this just isn't working properly!
Regards,
Zed
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Reason for the test |
do not archive
List,
Okay, fellows, I found the problem!
Some how I clicked on a message, don't know which one, and sent it to the "Don't
ever accept mail from this source again, ever" bin.
Mistake....must have mis-clicked. I killed all Matronics List stuff. Didn't affect
anybody else...I continue to get all the "Fwd" political junk from a friend
whose feathers I'd rather not ruffle.
Took some time to find the problem. The Earthlink system allows several hundred
entries in the "blocked source" file, and it was the last place I looked.
Good to go now, so re-start the "Red ScotchBrite" discussion!
Regards to all,
Zed
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Gross weight? |
Congrats on your purchase Dewight!
Please when you get things figured out, could you post some performance specs?
We don't get a lot of solid info on non Rotax engines here. And I'm curious.
Thanks loads and have fun!
Kevin
--------
Mark Twain: Twenty years from now you will be more disappointed by the things that
you didn't do than by the ones you did do. So throw off the bowlines. Sail
away from the safe harbor. Catch the trade winds in your sails. Explore. Dream.
Discover.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p 7948#207948
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Zenith CH750 Detail Pictures |
I had the opportunity to visit ZAC in Missouri last month and took over a hundred
detail pictures of the 750. Thanks to the folks at ZAC I was also able to fly
in the CH750 and was extremely impressed. Since a friend of mine and myself
are now starting to build one of these very nice airplanes we put the pictures
up on the web and hopefully folks find them useful.
The site is at:
http://www.ch750.ca
got to the details page for all the pictures. The website is still under construction
and will be updated frequently. Comments and suggestions greatly appreciated.
Stefan
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p 7990#207990
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|