---------------------------------------------------------- Zenith701801-List Digest Archive --- Total Messages Posted Thu 12/11/08: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:41 AM - Re: Dual sticks (kmccune) 2. 04:50 AM - Re: Re: From 2003 and Mark T (ZodieRocket) 3. 09:51 AM - Re: Re: From 2003 and Mark T (Dan) 4. 05:13 PM - Re: From 2003 and Mark T (kmccune) 5. 05:49 PM - Re: List archives was- From 2003 and Mark T (Dan) ________________________________ Message 1 _____________________________________ Time: 04:41:52 AM PST US Subject: Zenith701801-List: Re: Dual sticks From: "kmccune" Thanks John, I'll have to look that one up! At any rate it sounds as though its not too bad of a retrofit. Kevin do not archive -------- Mark Twain: Twenty years from now you will be more disappointed by the things that you didn't do than by the ones you did do. So throw off the bowlines. Sail away from the safe harbor. Catch the trade winds in your sails. Explore. Dream. Discover. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=218854#218854 ________________________________ Message 2 _____________________________________ Time: 04:50:02 AM PST US From: "ZodieRocket" Subject: RE: Zenith701801-List: Re: From 2003 and Mark T No Trouble Dan, any .125 that is available in my area has the fillet which denotes that it is in fact 6061 T6, if there is no fillet then it is 6063 and not strong enough to be used in the plane. I am not concerned about the strength added by having a fillet but I am very concerned about using a weaker composition of aluminium such as 6063. If you are capable of getting an inside 90 deg 6061 then it is the first time I have heard of it other then the custom extruded from Zenith. I am not sure but I believe from memory that .093 6061 T6 is still stronger then .125 6063 Mark -----Original Message----- Mark: Not to cause trouble here, but the .125 6061-T6 I got has 90 degree inside corners. When I got it I called Zenith and they said it was ok to use. The inside radius is slightly stronger, but they said the 90 degree corner was fine for this application since it is .125 instead of .093. Dan ________________________________ Message 3 _____________________________________ Time: 09:51:04 AM PST US From: "Dan" Subject: RE: Zenith701801-List: Re: From 2003 and Mark T Hi Mark: It is interesting what is available in different areas (countries) I was initially concerned because I bought my 6061-T6 from the local Pacific Steel and then the discussion came up on the list about it having the fillet and I discovered that mine did not so I called Zenith and they approved it's use. I think those posts are about #332-335 in the archives. I seem to remember the .093 that Zenith provides also has a 90 degree inside corner? Dan. -----Original Message----- From: owner-zenith701801-list-server@matronics.com [mailto:owner-zenith701801-list-server@matronics.com] On Behalf Of ZodieRocket Sent: Thursday, December 11, 2008 4:50 AM Subject: RE: Zenith701801-List: Re: From 2003 and Mark T No Trouble Dan, any .125 that is available in my area has the fillet which denotes that it is in fact 6061 T6, if there is no fillet then it is 6063 and not strong enough to be used in the plane. I am not concerned about the strength added by having a fillet but I am very concerned about using a weaker composition of aluminium such as 6063. If you are capable of getting an inside 90 deg 6061 then it is the first time I have heard of it other then the custom extruded from Zenith. I am not sure but I believe from memory that .093 6061 T6 is still stronger then .125 6063 Mark -----Original Message----- Mark: Not to cause trouble here, but the .125 6061-T6 I got has 90 degree inside corners. When I got it I called Zenith and they said it was ok to use. The inside radius is slightly stronger, but they said the 90 degree corner was fine for this application since it is .125 instead of .093. Dan Checked by AVG - http://www.avg.com 8:36 AM ________________________________ Message 4 _____________________________________ Time: 05:13:16 PM PST US Subject: Zenith701801-List: Re: From 2003 and Mark T From: "kmccune" I didn't know that archived posts were numbered, were are these located? Kevin do not archive dan(at)hillsgun.com wrote: > I think those posts are about #332-335 in the archives. > -- -------- Mark Twain: Twenty years from now you will be more disappointed by the things that you didn't do than by the ones you did do. So throw off the bowlines. Sail away from the safe harbor. Catch the trade winds in your sails. Explore. Dream. Discover. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=219000#219000 ________________________________ Message 5 _____________________________________ Time: 05:49:48 PM PST US From: "Dan" Subject: RE: Zenith701801-List: List archives was- From 2003 and Mark T Well I posted it, but I don't know how to access them by message number. I entered search criteria in the archive and it gave the results, the second line gives a message # but I can't figure out how to access by number. The posts about the spar extrusion are from June of 08. Dan. -----Original Message----- From: owner-zenith701801-list-server@matronics.com [mailto:owner-zenith701801-list-server@matronics.com] On Behalf Of kmccune Sent: Thursday, December 11, 2008 5:13 PM Subject: Zenith701801-List: Re: From 2003 and Mark T I didn't know that archived posts were numbered, were are these located? Kevin do not archive dan(at)hillsgun.com wrote: > I think those posts are about #332-335 in the archives. > -- -------- Mark Twain: Twenty years from now you will be more disappointed by the things that you didn't do than by the ones you did do. So throw off the bowlines. Sail away from the safe harbor. Catch the trade winds in your sails. Explore. Dream. Discover. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=219000#219000 Checked by AVG - http://www.avg.com 8:36 AM ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message zenith701801-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Zenith701801-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/zenith701801-list Browse Digests http://www.matronics.com/digest/zenith701801-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.