---------------------------------------------------------- Zenith701801-List Digest Archive --- Total Messages Posted Tue 08/18/09: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:37 AM - Dual Sticks (Joenan1934@aol.com) 2. 12:53 PM - Re: Dual Sticks (Dan Wilde) 3. 02:10 PM - Re: Dual Sticks (Ken Arnold) 4. 07:58 PM - Re: Dual Sticks (NYTerminat@aol.com) ________________________________ Message 1 _____________________________________ Time: 07:37:34 AM PST US From: Joenan1934@aol.com Subject: Zenith701801-List: Dual Sticks Iam about ready to put dual sticks in my 701. You cut the Y stick off at the connecting point, then weld a 24 inch tube from left to right. Then weld two upright sticks on top of the horizonial tube. I assume you put the elevator in zero position then weld the upright sticks. Iam told that the upright sticks should be moved forward about 20 degrees before you weld them. Any suggestions? Joseph _joenan1934@aol.com_ (mailto:joenan1934@aol.com) ________________________________ Message 2 _____________________________________ Time: 12:53:20 PM PST US From: Dan Wilde Subject: Re: Zenith701801-List: Dual Sticks Joenan1934@aol.com wrote: > Iam about ready to put dual sticks in my 701. You cut the Y stick off > at the connecting point, then weld a 24 inch tube from left to right. > Then weld two upright sticks on top of the horizonial tube. I assume > you put the elevator in zero position then weld the upright sticks. > Iam told that the upright sticks should be moved forward about 20 > degrees before you weld them. Any suggestions? Joseph > joenan1934@aol.com > > ------------------------------------------------------------------------ > * > Why do you want dual sticks? The Y stick works great from either side. > * Dan Wilde N948DW ________________________________ Message 3 _____________________________________ Time: 02:10:43 PM PST US From: "Ken Arnold" Subject: Re: Zenith701801-List: Dual Sticks Dual sticks look great! Suggest you install a hinge near floor on each stick with locking pin to fold the stick down on ingress and egress. Send us pics when installed. Ken do not archive ----- Original Message ----- From: "Dan Wilde" Sent: Tuesday, August 18, 2009 3:47 PM Subject: Re: Zenith701801-List: Dual Sticks > > Joenan1934@aol.com wrote: >> Iam about ready to put dual sticks in my 701. You cut the Y stick off at >> the connecting point, then weld a 24 inch tube from left to right. Then >> weld two upright sticks on top of the horizonial tube. I assume you put >> the elevator in zero position then weld the upright sticks. Iam told that >> the upright sticks should be moved forward about 20 degrees before you >> weld them. Any suggestions? Joseph joenan1934@aol.com >> >> >> ------------------------------------------------------------------------ >> * >> Why do you want dual sticks? The Y stick works great from either side. >> * > > Dan Wilde > N948DW > > > ________________________________ Message 4 _____________________________________ Time: 07:58:43 PM PST US From: NYTerminat@aol.com Subject: Re: Zenith701801-List: Dual Sticks Why would you want to do two sticks? Have you flown with the " Y" STICK? Bob Spudis In a message dated 8/18/2009 10:38:11 A.M. Eastern Daylight Time, Joenan1934@aol.com writes: Iam about ready to put dual sticks in my 701. You cut the Y stick off at the connecting point, then weld a 24 inch tube from left to right. Then weld two upright sticks on top of the horizonial tube. I assume you put the elevator in zero position then weld the upright sticks. Iam told that the upright sticks should be moved forward about 20 degrees before you weld them. Any suggestions? Joseph _joenan1934@aol.com_ (mailto:joenan1934@aol.com) ____________________________________ ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message zenith701801-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Zenith701801-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/zenith701801-list Browse Digests http://www.matronics.com/digest/zenith701801-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.