Today's Message Index:
----------------------
1. 12:34 AM - Re: about to take my wings off... any pointers (ProWash)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: about to take my wings off... any pointers |
GREETINGS,
I recently finished the build on mt 701. During the build process and the move
to the airport, I installed and removed the wings (completely by myself) several
times. I built some cheap wing stands out of 2X4s to support the wings at
the proper height next to the fuselage.
Drain all the fuel first. I recommend removing the struts from the wings. It
only takes about ten minutes per side. This will make handling the wing much
easier and less prone to damage. Mark the struts for location for ease of assembly.
If the mounting holes were drilled properly there should be little concern for
re-rigging. I would pull measurements from the trailing edge at the outboard
ends to the rudder stops before removing the wings just in case there is some
slop in the mounts.
I haven't painted mine, but I don't believe a properly applied paint job will have
a noticeable effect on the flight characteristics.
--------
R Craig
North Central Arkansas
701 SP Nearly Done
Do Not Archive
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=263468#263468
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|