Zenith701801-List Digest Archive

Thu 12/17/09


Total Messages Posted: 8



Today's Message Index:
----------------------
 
     1. 03:41 AM - Re: 701 Matco Wheel Recall (MacDonald Doug)
     2. 11:32 AM - 701 Horizontal Tail Kit for Sale - $650 (jeffk)
     3. 12:03 PM - 701 parts (flydog1966@aol.com)
     4. 12:55 PM - Re: 701 parts (Chris Blackmore)
     5. 01:03 PM - Re: Radiator shutter (JG)
     6. 04:21 PM - Re: 701 parts (Keith Ashcraft)
     7. 04:43 PM - Re: 701 parts (Flydog1966@aol.com)
     8. 05:37 PM - Re: 701 parts (Chris Blackmore)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:41:35 AM PST US
    From: MacDonald Doug <dougsnash@yahoo.com>
    Subject: Re: 701 Matco Wheel Recall
    While at the open hangar day in September, I noticed a broken Matco wheel under one of the desks on the office. Supposedly it was one of the originals off of the 750 demonstrator. It failed during a firm but not overly so landing. I haven't seen my news letter yet so I can't comment if that is the same wheel you are talking about. Doug M NW Ontario, Canada CH-01 Scratch builder Do Not Archive --- On Wed, 12/16/09, Chuck Deiterich <cffd@pgrb.com> wrote: > From: Chuck Deiterich <cffd@pgrb.com> > Subject: Zenith701801-List: 701 Matco Wheel Recall > To: zenith701801-list@matronics.com > Received: Wednesday, December 16, 2009, 10:15 PM > > Page 15 of the Nov-Dec > 2009 Zenair News says that > old style Matco wheels can fail without warning. I am > not sure when Zenith > went to the new wheels. They show a wheel with the > rimfractured > around the bolt circle, looks scary. They do not say > what the wheel was on > or the weight ofthe airplane. To replace the > wheels is about $208, > plus shipping I would guess. > > Has anyone on this list > seen this failure on a > 701? > > Chuck D. > N701TX __________________________________________________________________ Yahoo! Canada Toolbar: Search from anywhere on the web, and bookmark your favourite sites. Download it now


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 11:32:42 AM PST US
    Subject: 701 Horizontal Tail Kit for Sale - $650
    From: "jeffk" <jeff@jkember.com>
    Purchased from Quality Sport Planes last year. I've inventoried the kit, but haven't started it. I'm in Southern California and am moving. Would love to get the kit in a builders hands soon as possible. Also have a current set of plans for the 701. Thanks, Jeff 310/210/7090 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=277961#277961


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 12:03:11 PM PST US
    From: flydog1966@aol.com
    Subject: 701 parts
    I have a 701 fuselage, rudder,and horz stab. Abandoned project.Need it sold,and out of my garage ASAP $1500 !! Located in Westford,Ma


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 12:55:11 PM PST US
    From: "Chris Blackmore" <blackmore@platinum.ca>
    Subject: Re: 701 parts
    How finished is the fuselage ?? Chris -------Original Message------- From: flydog1966@aol.com Subject: Zenith701801-List: 701 parts I have a 701 fuselage, rudder,and horz stab. Abandoned project.Need it sold,and out of my garage ASAP $1500 !! Located in Westford,Ma ========== ========== ========== ==========


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 01:03:22 PM PST US
    Subject: Re: Radiator shutter
    From: JG <vgstol@bigpond.net.au>
    *About a month ago there was some discussion and photos of a shutter posted on the Rans S7 Yahoo forum.* * * *JG * On Thu, Dec 17, 2009 at 10:14 AM, Joe Spencer <jpspencer@cableone.net>wrote: > *Well I have gotten tired of fooling with tape to try to keep the coolant > and oil temps up and am in the process of building some shutters...anybody > else built any?* > *thx Joe* > > * > > * > >


    Message 6


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:21:59 PM PST US
    From: Keith Ashcraft <ch701builder@yahoo.com>
    Subject: Re: 701 parts
    Do you have any pictures of the fuselage? Keith CH701 scratch ************************************************ ________________________________ From: Chris Blackmore <blackmore@platinum.ca> Sent: Thu, December 17, 2009 1:22:30 PM Subject: Re: Zenith701801-List: 701 parts How finished is the fuselage ?? Chris -------Original Message------- From: flydog1966@aol.com Subject: Zenith701801-List: 701 parts I have a 701 fuselage, rudder,and horz stab. Abandoned project.Need it sold,and out of my garage ASAP $1500 !! Located in Westford,Ma electric.com om">www.buildersbooks.com mebuilthelp.com ww.matronics.com/contribution -List">http://www.matronics.com/Navigator?Zenith701801-List onics.com


    Message 7


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:43:03 PM PST US
    From: Flydog1966@aol.com
    Subject: Re: 701 parts
    No, just build photos. Close up stuff. In a message dated 12/17/2009 7:22:18 P.M. Eastern Standard Time, ch701builder@yahoo.com writes: Do you have any pictures of the fuselage? Keith CH701 scratch ************************************************ ____________________________________ From: Chris Blackmore <blackmore@platinum.ca> Sent: Thu, December 17, 2009 1:22:30 PM Subject: Re: Zenith701801-List: 701 parts How finished is the fuselage ?? Chris -------Original Message------- From: _flydog1966@aol.com_ (mailto:flydog1966@aol.com) (mailto:zenith701801-list@matronics.com) Subject: Zenith701801-List: 701 parts I have a 701 fuselage, rudder,and horz stab. Abandoned project.Need it sold,and out of my garage ASAP $1500 !! Located in Westford,Ma _electric.com_ (http://electric.com/) om">_www.buildersbooks.com_ (http://www.buildersbooks.com/) _mebuilthelp.com_ (http://mebuilthelp.com/) _ww.matronics.com/contribution_ (http://ww.matronics.com/contribution) -List">_http://www.matronics.com/Navigator?Zenith701801-List_ (http://www.matronics.com/Navigator?Zenith701801-List) _onics.com_ (http://onics.com/) (http://www.aeroelectric.com/) (http://www.buildersbooks.com/) (http://www.homebuilthelp.com/) (http://www.matronics.com/contribution) (http://www.matronics.com/Navigator?Zenith701801-List)


    Message 8


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:37:35 PM PST US
    From: "Chris Blackmore" <blackmore@platinum.ca>
    Subject: Re: 701 parts
    Is it just the shell front and back How much is finished inside it...coul d you send me a copy of the build photos and any other info, good or bad ?, as this is the only thing that I have NOT started and this might just fit th e bill -------Original Message------- From: Flydog1966@aol.com Subject: Re: Zenith701801-List: 701 parts No, just build photos. Close up stuff. In a message dated 12/17/2009 7:22:18 P.M. Eastern Standard Time, ch701builder@yahoo.com writes: Do you have any pictures of the fuselage? Keith CH701 scratch ************************************************ From: Chris Blackmore <blackmore@platinum.ca> Sent: Thu, December 17, 2009 1:22:30 PM Subject: Re: Zenith701801-List: 701 parts How finished is the fuselage ?? Chris -------Original Message------- From: flydog1966@aol.com Subject: Zenith701801-List: 701 parts I have a 701 fuselage, rudder,and horz stab. Abandoned project.Need it sold,and out of my garage ASAP $1500 !! Located in Westford,Ma electric.com om">www.buildersbooks.com mebuilthelp.com ww.matronics.com/contribution -List">http://www.matronics.com/Navigator?Zenith701801-List onics.com ========== ttp://www.aeroelectric.com/">www.aeroelectric.com m/ href="http://www.buildersbooks.com/">www.buildersbooks.com "http://www.homebuilthelp.com/">www.homebuilthelp.com tp://www.matronics.com/contribution">http://www.matronics.com/contributio n ========== List href="http://www.matronics.com/Navigator?Zenith701801-List">http:/ /www matronics.com/Navigator?Zenith701801-List ========== ms.matronics.com/">http://forums.matronics.com ========== ========== ========== ========== ==========




    Other Matronics Email List Services

  • Post A New Message
  •   zenith701801-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Zenith701801-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/zenith701801-list
  • Browse Zenith701801-List Digests
  •   http://www.matronics.com/digest/zenith701801-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --