Today's Message Index:
----------------------
1. 07:26 AM - Autocad DWG files (stepinwolf)
2. 08:10 AM - Re: Autocad DWG files (Chris Blackmore)
3. 09:06 AM - Re: Bungee discussion (Chuck Deiterich)
4. 04:22 PM - Re: Re: Bungee discussion (Keith Ashcraft)
5. 04:54 PM - CH701 builders & fliers - Tunnel & Seat front questions (Keith Ashcraft)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Autocad DWG files |
I am a 701 & 750 scratch builder, and in order to make things more interesting for both of my builds, I am planing, among other things, to build a CNC machine in the coming year. The " MechMate " unit ( check out the following site ) http://www.mechmate.com/ will be built with a 5' x 12' table, so that complete 12' aluminum sheets can be process by the machine.
My question to fellow Matronics List members is this. Does anyone have, or have
access to Autocad DWG files for the 701 & 750, that they would be willing to
share.? I am quite aware that I can spend my time drawing them myself, however
my time would be better spent assembling, and flying, then by spending weeks
in front of the keyboard, drawing DWG files, especially if they have already been
done by another builder.
If I were to get help in obtaining the necessary 701 & 750 files, as a courtesy,
cutting out some assorted parts for a fellow builder, would not be out of the
question.
A big thank you, to all those of you, who will take the time to address my concerns.
Robert
the 701&750 scratch.
www.autoretro.info
--------
Live each day, as if it was your last
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=281897#281897
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Autocad DWG files |
I also would like to get info on CNC files if they are available
Chris
-------Original Message-------
From: stepinwolf
Subject: Zenith701801-List: Autocad DWG files
pelland@cgocable.ca>
I am a 701 & 750 scratch builder, and in order to make things more
interesting for both of my builds, I am planing, among other things, to
build a CNC machine in the coming year. The " MechMate " unit ( check out
the following site ) http://www.mechmate.com/ will be built with a 5' x 1
2'
table, so that complete 12' aluminum sheets can be process by the machine
=2E
My question to fellow Matronics List members is this. Does anyone have, o
r
have access to Autocad DWG files for the 701 & 750, that they would be
willing to share.? I am quite aware that I can spend my time drawing them
myself, however my time would be better spent assembling, and flying, the
n
by spending weeks in front of the keyboard, drawing DWG files, especially
if
they have already been done by another builder.
If I were to get help in obtaining the necessary 701 & 750 files, as a
courtesy, cutting out some assorted parts for a fellow builder, would not
be
out of the question.
A big thank you, to all those of you, who will take the time to address m
y
concerns.
Robert
the 701&750 scratch.
www.autoretro.info
--------
Live each day, as if it was your last
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=281897#281897
==========
==========
==========
==========
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Bungee discussion |
I used a pulley on the cable and two springs (for redundancy) to pull
the down elevator cable to the right. It is attached to the bottom
gusset on the mid fuselage "L" frame.
Chuck D.
N701TX
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Bungee discussion |
Hey Chuck,
Could you take a quick picture of your setup for us.
Thanks,
Keith
N 38.9940
W 105.1305
Alt. 9,100'
Scratch - Working on cabin area
________________________________
From: Chuck Deiterich <cffd@pgrb.com>
Sent: Sun, January 17, 2010 10:05:14 AM
Subject: Zenith701801-List: Re: Bungee discussion
I used a pulley on the cable and two springs (for
redundancy) to pull the down elevator cable to the right. It is attached
to the bottom gusset on the mid fuselage "L" frame.
Chuck D.
N701TX
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | CH701 builders & fliers - Tunnel & Seat front questions |
All CH701 builders/fliers,
On page 7-F-11, in the center of the page, to the right of drawing 1&1A, there
is a view showing the section of the tunnel mated with the seat front. I see there
are 2-"L" that are shown about midway up on the inside of the tunnel.
I don't see these depicted on any side views of the tunnel, and the assembly guides
do not mention installing these.
Any ideas?
Keith
CH701 - scratch
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|