---------------------------------------------------------- Zenith701801-List Digest Archive --- Total Messages Posted Sun 01/17/10: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:26 AM - Autocad DWG files (stepinwolf) 2. 08:10 AM - Re: Autocad DWG files (Chris Blackmore) 3. 09:06 AM - Re: Bungee discussion (Chuck Deiterich) 4. 04:22 PM - Re: Re: Bungee discussion (Keith Ashcraft) 5. 04:54 PM - CH701 builders & fliers - Tunnel & Seat front questions (Keith Ashcraft) ________________________________ Message 1 _____________________________________ Time: 07:26:21 AM PST US Subject: Zenith701801-List: Autocad DWG files From: "stepinwolf" I am a 701 & 750 scratch builder, and in order to make things more interesting for both of my builds, I am planing, among other things, to build a CNC machine in the coming year. The " MechMate " unit ( check out the following site ) http://www.mechmate.com/ will be built with a 5' x 12' table, so that complete 12' aluminum sheets can be process by the machine. My question to fellow Matronics List members is this. Does anyone have, or have access to Autocad DWG files for the 701 & 750, that they would be willing to share.? I am quite aware that I can spend my time drawing them myself, however my time would be better spent assembling, and flying, then by spending weeks in front of the keyboard, drawing DWG files, especially if they have already been done by another builder. If I were to get help in obtaining the necessary 701 & 750 files, as a courtesy, cutting out some assorted parts for a fellow builder, would not be out of the question. A big thank you, to all those of you, who will take the time to address my concerns. Robert the 701&750 scratch. www.autoretro.info -------- Live each day, as if it was your last Read this topic online here: http://forums.matronics.com/viewtopic.php?p=281897#281897 ________________________________ Message 2 _____________________________________ Time: 08:10:11 AM PST US From: "Chris Blackmore" Subject: Re: Zenith701801-List: Autocad DWG files I also would like to get info on CNC files if they are available Chris -------Original Message------- From: stepinwolf Subject: Zenith701801-List: Autocad DWG files pelland@cgocable.ca> I am a 701 & 750 scratch builder, and in order to make things more interesting for both of my builds, I am planing, among other things, to build a CNC machine in the coming year. The " MechMate " unit ( check out the following site ) http://www.mechmate.com/ will be built with a 5' x 1 2' table, so that complete 12' aluminum sheets can be process by the machine =2E My question to fellow Matronics List members is this. Does anyone have, o r have access to Autocad DWG files for the 701 & 750, that they would be willing to share.? I am quite aware that I can spend my time drawing them myself, however my time would be better spent assembling, and flying, the n by spending weeks in front of the keyboard, drawing DWG files, especially if they have already been done by another builder. If I were to get help in obtaining the necessary 701 & 750 files, as a courtesy, cutting out some assorted parts for a fellow builder, would not be out of the question. A big thank you, to all those of you, who will take the time to address m y concerns. Robert the 701&750 scratch. www.autoretro.info -------- Live each day, as if it was your last Read this topic online here: http://forums.matronics.com/viewtopic.php?p=281897#281897 ========== ========== ========== ========== ________________________________ Message 3 _____________________________________ Time: 09:06:08 AM PST US From: "Chuck Deiterich" Subject: Zenith701801-List: Re: Bungee discussion I used a pulley on the cable and two springs (for redundancy) to pull the down elevator cable to the right. It is attached to the bottom gusset on the mid fuselage "L" frame. Chuck D. N701TX ________________________________ Message 4 _____________________________________ Time: 04:22:22 PM PST US From: Keith Ashcraft Subject: Re: Zenith701801-List: Re: Bungee discussion Hey Chuck, Could you take a quick picture of your setup for us. Thanks, Keith N 38.9940 W 105.1305 Alt. 9,100' Scratch - Working on cabin area ________________________________ From: Chuck Deiterich Sent: Sun, January 17, 2010 10:05:14 AM Subject: Zenith701801-List: Re: Bungee discussion I used a pulley on the cable and two springs (for redundancy) to pull the down elevator cable to the right. It is attached to the bottom gusset on the mid fuselage "L" frame. Chuck D. N701TX ________________________________ Message 5 _____________________________________ Time: 04:54:01 PM PST US From: Keith Ashcraft Subject: Zenith701801-List: CH701 builders & fliers - Tunnel & Seat front questions All CH701 builders/fliers, On page 7-F-11, in the center of the page, to the right of drawing 1&1A, there is a view showing the section of the tunnel mated with the seat front. I see there are 2-"L" that are shown about midway up on the inside of the tunnel. I don't see these depicted on any side views of the tunnel, and the assembly guides do not mention installing these. Any ideas? Keith CH701 - scratch ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message zenith701801-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Zenith701801-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/zenith701801-list Browse Digests http://www.matronics.com/digest/zenith701801-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.