---------------------------------------------------------- Zenith701801-List Digest Archive --- Total Messages Posted Mon 01/10/11: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:46 AM - Chat Tonight (George Race) 2. 06:15 AM - Re: Matco Gear Bolt Pattern? (Randall J Hebert) 3. 07:40 AM - Re: Matco Gear Bolt Pattern? (Mike Weesner) 4. 08:46 AM - Re: Matco Gear Bolt Pattern? (John Marzulli) 5. 09:26 AM - Re: Matco Gear Bolt Pattern? (Mark Sherman) ________________________________ Message 1 _____________________________________ Time: 04:46:50 AM PST US From: "George Race" Subject: Zenith701801-List: Chat Tonight Live Chat Room every Monday evening around 8:00 EDT http://www.mykitairplane.com Click on the Chat Room link at the top of the page. George ________________________________ Message 2 _____________________________________ Time: 06:15:01 AM PST US From: "Randall J Hebert" Subject: RE: Zenith701801-List: Matco Gear Bolt Pattern? Try www.kobushweldingandmachining.com Go to the aircraft tools There is a drill guide that worked well for me. Randall J Hebert Randall J Hebert & Associates, Inc Consulting Engineers Ph 337-261-1976 Fx 337-261-1977 From: owner-zenith701801-list-server@matronics.com [mailto:owner-zenith701801-list-server@matronics.com] On Behalf Of John Marzulli Sent: Sunday, January 09, 2011 10:34 PM Subject: Re: Zenith701801-List: Matco Gear Bolt Pattern? I know you are supposed to transfer punch them, but I remember seeing a pattern in the Matco manual. Can anyone confirm that the holes are 1.75" apart? John Marzulli http://MarzulliPhoto.net/ http://701Builder.blogspot.com/ On Sun, Jan 9, 2011 at 6:14 PM, MacDonald Doug wrote: John, you are suposed to remove the axel from the wheel then use a transfer punch to center punch the gear spring through the bolt holes in the axle. There is no template for the Matco axels other than this. Doug MacDonald CH-701 C-GBQX NW Ontario, Canada Phase One Do Not Archive --- On Sun, 1/9/11, John Marzulli wrote: From: John Marzulli Subject: Zenith701801-List: Matco Gear Bolt Pattern? Received: Sunday, January 9, 2011, 5:04 PM I have decided to use the Grove gear instead of the Zenith supplied leaf. Can anyone supply the bolt pattern for the stock Matco gear that Zenith supplies? I can't find the original Matco instructions. Thanks, John Marzulli http://MarzulliPhoto.net/ http://701Builder.blogspot.com/ ist" rel=nofollow target=_blank>http://www.matronics.com/Navigator?Zenith701801-List et=_blank>http://forums.matronics.com llow target=_blank>http://www.matronics.com/contribution ist" target="_blank">http://www.matronics.com/Navigator?Zenith701801-List tp://forums.matronics.com _blank">http://www.matronics.com/contribution ________________________________ Message 3 _____________________________________ Time: 07:40:06 AM PST US From: "Mike Weesner" Subject: Re: Zenith701801-List: Matco Gear Bolt Pattern? On Sun, 9 Jan 2011 18:14:49 -0800 (PST) MacDonald Doug wrote: > John, you are suposed to remove the axel from the wheel >then use a transfer punch to center punch the gear spring >through the bolt holes in the axle. There is no template >for the Matco axels other than this. > > Doug MacDonald > CH-701 C-GBQX > NW Ontario, Canada > Phase One > > Do Not Archive > > --- On Sun, 1/9/11, John Marzulli > wrote: > > >From: John Marzulli > Subject: Zenith701801-List: Matco Gear Bolt Pattern? > To: zenith701801-list@matronics.com > Received: Sunday, January 9, 2011, 5:04 PM > > > I have decided to use the Grove gear instead of the >Zenith supplied leaf. > > Can anyone supply the bolt pattern for the stock Matco >gear that Zenith supplies? I can't find the original >Matco instructions. > > the template block that can be bought online is of great help > Thanks, > > John Marzulli > > http://MarzulliPhoto.net/ > http://701Builder.blogspot.com/ > > > > > ________________________________ Message 4 _____________________________________ Time: 08:46:23 AM PST US Subject: Re: Zenith701801-List: Matco Gear Bolt Pattern? From: John Marzulli My point is that I want to get the axle pre-drilled by Grove, so I need to bolt pattern. Thanks, John Marzulli http://MarzulliPhoto.net/ http://701Builder.blogspot.com/ On Mon, Jan 10, 2011 at 7:36 AM, Mike Weesner wrote: > mikeweesner@multipro.com> > > On Sun, 9 Jan 2011 18:14:49 -0800 (PST) > > MacDonald Doug wrote: > >> John, you are suposed to remove the axel from the wheel then use a >> transfer punch to center punch the gear spring through the bolt holes in the >> axle. There is no template for the Matco axels other than this. >> >> Doug MacDonald >> CH-701 C-GBQX >> NW Ontario, Canada >> Phase One >> >> Do Not Archive >> >> --- On Sun, 1/9/11, John Marzulli wrote: >> >> >> From: John Marzulli >> Subject: Zenith701801-List: Matco Gear Bolt Pattern? >> To: zenith701801-list@matronics.com >> Received: Sunday, January 9, 2011, 5:04 PM >> >> >> I have decided to use the Grove gear instead of the Zenith supplied leaf. >> >> Can anyone supply the bolt pattern for the stock Matco gear that Zenith >> supplies? I can't find the original Matco instructions. >> >> the template block that can be bought online is of great help >> >> Thanks, >> >> John Marzulli >> >> http://MarzulliPhoto.net/ >> http://701Builder.blogspot.com/ >> >> >> >> >> >> > > ________________________________ Message 5 _____________________________________ Time: 09:26:32 AM PST US Subject: Re: Zenith701801-List: Matco Gear Bolt Pattern? From: Mark Sherman If I was spending a thousand bucks on a landing gear from Grove They had better know what the bolt pattern is or find out. Mark S. 701/912uls Sent from Mark's iPhone On Jan 10, 2011, at 8:29 AM, John Marzulli wrote: > My point is that I want to get the axle pre-drilled by Grove, so I need t o bolt pattern. > > Thanks, > > John Marzulli > > http://MarzulliPhoto.net/ > http://701Builder.blogspot.com/ > > > On Mon, Jan 10, 2011 at 7:36 AM, Mike Weesner w rote: pro.com> > > On Sun, 9 Jan 2011 18:14:49 -0800 (PST) > > MacDonald Doug wrote: > John, you are suposed to remove the axel from the wheel then use a transfe r punch to center punch the gear spring through the bolt holes in the axle. There is no template for the Matco axels other than this. > > Doug MacDonald > CH-701 C-GBQX > NW Ontario, Canada > Phase One > > Do Not Archive > > --- On Sun, 1/9/11, John Marzulli wrote: > > > From: John Marzulli > Subject: Zenith701801-List: Matco Gear Bolt Pattern? > To: zenith701801-list@matronics.com > Received: Sunday, January 9, 2011, 5:04 PM > > > I have decided to use the Grove gear instead of the Zenith supplied leaf. > > Can anyone supply the bolt pattern for the stock Matco gear that Zenith su pplies? I can't find the original Matco instructions. > > the template block that can be bought online is of great help > > Thanks, > > John Marzulli > > http://MarzulliPhoto.net/ > http://701Builder.blogspot.com/ > > > > > > > > ========== > -List" target="_blank">http://www.matronics.com/Navigator?Zenith701801-L ist > ========== > http://forums.matronics.com > ========== > le, List Admin. > ="_blank">http://www.matronics.com/contribution > ========== > > > > > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message zenith701801-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Zenith701801-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/zenith701801-list Browse Digests http://www.matronics.com/digest/zenith701801-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.