Today's Message Index:
----------------------
1. 12:19 PM - FF News: The Footprints Filmworks Stock Exchange (footprints)
2. 02:10 PM - Re: FF News: The Footprints Filmworks Stock Exchange (Robert Pelland)
3. 03:30 PM - Re: FF News: The Footprints Filmworks Stock Exchange (John Marzulli)
4. 05:32 PM - Routing the wires from the Y stick (Craig Payne)
5. 05:58 PM - Re: Routing the wires from the Y stick (BobKat)
6. 06:25 PM - Slatless 701 (bobkat)
7. 06:30 PM - Re: Routing the wires from the Y stick (Tommy Walker)
8. 08:08 PM - Re: Routing the wires from the Y stick (MacDonald Doug)
9. 11:04 PM - Official Zenith701801-List FAQ (Frequently Asked Questions) (Matt Dralle)
10. 11:10 PM - Official Zenith701801-List Usage Guidelines (Matt Dralle)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | FF News: The Footprints Filmworks Stock Exchange |
My Father, The President,'
Chapter Nine
The Universe is a big place and the evolution of Mankind a bigger and greater topic
to discover, learn, appreciate and 'wonder about...' I would often watch
the planet Venus circling Earth during peak seasons in January 2018 and realized
that I am actually a minute person who dares to dream beyond the stars....I
would often catch up on local news and discovered the treatment of technology
and the role our lifestyle our forefathers led...Omar was always asleep whilst
I wrote down notes about this book...Omar says that he read over 700 books on
the subjects of human development, health, wealth, salesmanship, science, architecture,
politics and 'romantic novels....' I later discovered that his reading
had played a role towards his achievements although at times he would receive
flack from his father, his community, his country and his friends....I always
told him that no-matter what harm or pain a person caused you-it is easily
mended and one has to have a strong mindset to deal with critics...Sure, we
had the fans and the support of world leaders and the empty gaps in our lives
started to wear away with the passage of time and the realization of 'a new tomorrow....'
As a woman, we perceive life from a different angle as we are created
from the rib of Man....
When meetings with Parliament were underway many had said that the current government
was achieving the goals of a new United States and the c o u n t r y was
en-route to compete with African countries, North American countries, Asia,
Australia and Europe...I had also noticed that the country had provided safe treatments
to illnesses, virus's and diseases that caused death at an early age...The
national average had gone up from 72 last year to 76 this year, one of
the highest ratio's with the improvement of technology and the betterment of doctors,
physcians, specialists and workers who wanted to improve the lives of
the 21st century...Meetings in Parliament were often attended by myself and Omar
had associated new programs to implement in governement that would maintain
The United States as a first world country and 'rid off,' the country of the
once tainted past...The stadiums used in the 'Olypics,' would be used by Omar
to showcase his talent when he speaks to members of the community in March as
part of his presidential race in 2025...When Omar does become and lead the country
as President he will be the youngest president to lead The United States
at the helm, focusing on changng thinking methods and creating a better future
for The United States....
Omar Abdulla had often spoken and met with the sacred organization of the illumanti
discovering 'new facts,' about the future of the world economy and was conformed
to privacy of the relationship with members...He would often say that
the world was changing and 'new-order,' concepts were discovered on the trillion-dollar
roundtable...He would remain 'calm and ambitious,' when speaking to
members of government and remained silent when certain ideas were not 'pushed
and pressed,' by the United States of America government...I remember him discussing
ideas that were perhaps too foreign for the everyday man to visualize and
relate too...He had made friends with top executives and Managing Directors
to help market their businesses on foreign soil...Members from the Federal Reserve
were often invited to our castle to stem new-ways of 'juicing up,' the more
than 14 trillion dollar finance debt with China, India, Denmark and Brazil.
Alaska was my most favourite place to visit with Omar-last year- because the
city was rated higher than Rio da Janeiro, New York, Tokyo, Paris, Philadelphia,
Pretoria, London and Venice...Clearly a motivating factor to more than 3 million
tourists per year....Omar would often practise 'yoga techniques,' whilst
he was learning about the United States community and related topics that dealt
with the betterment of The United States...He had guru's, swami's, Imaam's
and holy priests visit our home to teach him the importance of religion, mind-control,
relaxation and fundermental elements that focused on removing the toxins
of matter...I had learnt alot from these people who were the kindest people
in the land....I had learnt that the Universal calling for God was AUM, if chanted
and breathed in the right way....Omar had dared to discover 'new things,'
from people because he remembered his teachings that 'no-man is an island,'
and always wanted to fill our home with guests to improve the lifestyle of his
family and greater community. He was a wizard at learning because people always
admired his smirk and his ability to speak to people who were 'right at the
top,' and people who believed that life was not only about money, life is about
empowering people....His guests would often love his smile and the way he
dealt with people....One of his guru's had told us to join them for a week in
January to Tibet to discover the altitude and focus of the body....I had went
along to Tibet with Omar because his friends wanted to learn from this and he
wanted to discover techniques of ridding his body, mind, and spirit of toxins....I
had learnt whilst in Tibet that the art of living is breathing in the right
chakra. Whenever you do meet with Omar ask him to show you this technique...He
loves teaching people what he learnt not only in government-but as a person
of life....He had often joked with the guru to teach him the art of Kamasutra
and I told him that he could discover this technique only with me....He had
discovered!
the tec
hniques of Kamasutra which is the best of the sexual act in this world because
it teaches you truly how to love and caress your partner....Being the wife of
Omar I had never imagined to be on this ride with him....Perhaps when I married
him in 2011, his parents should of given me a warning. Marry him and be prepared
to be on a rollor-coaster....We had left our five children in the company
of their grandparents who enjoyed spoiling our little brats....Whilst in Tibet,
we were on a certain slope in the Himalaya's where we enjoyed conversation....
Alison: So, how does it feel to be on top of the world....!
Omar: Uhmmm...Life is about Living in Full Energy...If we live our lives in the
past or in the future we have failed our today...We must enjoy today....Relax
kitten....How is your vibrations of energy....??
Alison: I love to be in the mountains where no-one can see us....Reminds me of
the indian movies....!
Omar: So, you married me to be in the mountains and be like an Indian girl....
Alison: You know I have different beliefs from you Omar-I am a white woman and
I love entertaining my brain to new brain waves....
Omar: Brain waves??
Alison: Yeah, when you are in the midst of your life and you have so many things
to do, it's good to share quality time with the person you love with all your
heart....
Omar: Oh Alison....You would never know how much I love you...Perhaps at times
I hide my love for you because if I show too much-You could fall over....
Alison: I have already fell 'head over heels,' for you....What have you learnt
here in Tibet.....
Omar: I learnt that life is worth exploring....I learn't that all my hard work
does pay off.....I learnt that even if you have the slightest glimpse at your
dreams it's worth taking that risk....I learnt that truth, love and joy are the
most pleasure moments in life....
Alison: I am right by your side....You know you are lucky to have me as a wife....A
wife is the best- job in the world married to you....
Omar: I am a father, I am a husband, I am a lover, I am a Son and I am the future
President of the United States....I have to be in control of my feelings and
ambitions to know where I am headed...
Alison: Oh Gosh...Try some of this candy here in Tibet.....
Omar: It's sour....Tastes like something some-one put into a mill....
Alison: It's the national flavour here in Tibet....It suppose to keep your energy
high....
Omar: Okay, Cool.....DId you call the children, how are they...??
Alison: Sakeena could not stop yapping, Akber is fine, Fathima is dazzed with the
flu, Zakiyyah is loving your parents company and Ebrahim sleeps all day....
Omar: I miss them so much....We are lucky to spend 'you and me,' time after six
years....
Alison: Do you want to hear me scream I love you Omar....
Omar: Ohhh.....Louder.....
Alison: I love you Omar....
Omar: Haha....
Whilst in Tibet we had met with famous personalities including Rajan Tata, Lakshmi
Mittal, Sachin Tendulkar and President Pratibha Devisingh Patil....Omar had
spoken well to the Indian President and learnt from one of the world's finest
presidents...He had told her that he was running for President of The U,S in
the future and she assured him that his work will pay off according to his sincere
attitude, intention and willingness to be a genuine President....I had got
along well with billionaire Lakshmi Mittal by understanding what a man who
had nothing almost twenty years ago could achieve one of the highest targets in
world history....When we arrived back in The United States on Omar's father's
birthday-1 February 2018- Omar was alarmed to receive a 'standing ovation,'
at the Chicago National Airport....Many leaders in The United States had read
stories about his success and wanted the opportunity to meet him and share some
his experiences....He had told the tabloids that his presidency will only be
reached in seven years and members can support him by voting for the party and
personality who could 'juice-up,' the U.S. cabinet. The United States was fast
becoming a nation that people locally and internationally talked and spoke
about....His drive was ready to tackle The United States and chose to be secure
in this thinking...He always remembered his fathers teachings when he was little
and understood the importance of being a natural talent when dealing with
businesses, organizations, teams and brokerage firms....The market at that time
was aware of Abdulla as holding various titles and many w o r d s spoken would
often influence the local markets including The Johannesburg Stock Exchange,
The Footprints Stock Exchange, The South African Reserve Bank, The Bond Exchange
of South Africa, The South African Stock Exchange,The Gold and Silver Exchange,
The Diamond Exchange and international Forex Exchanges....
The Department of Human Rights and The Department of Justice had formed legislation
with the government in 2018 to form a coalition government that would improve
sectors in government and forged relationships with other Departments to
form two seperate parties ruling the government...Many had said that a coalition
government would bring together the nation with ethics that plagued the past
of The United States...The Departments had built relationships to form a semi-capitalist
country with strong forces and ties with the two parties concerned...This
would aid members of the country to be able to agree on certain trends
and mend forces to remain competitive with the world economy...Minor to major
developments were adressed with Parliament and many sectors had 'joined forces,'
to form a hierarchy government that ruled the country...Voters were in tune
with the current government and news had spread 'wild and fast,' with the formation
of a new government...This would entail cheaper forms of taxes and levies
to country residents and formed a new tribulation in the States....The government
would maintain the 447 members of parliament with turmoil being discussed
by government...The way the current government dealt with turmoil was by
throwing 'cold water,' on members who had not agreed to certain notations discussed
according to the constitutional court....Although many changes were implemented
in the country as discussed previously, the country had built a class
in humanity from the once 'raided past...' Many had said that with the support
of international government could see The United States as the leader in The
America's and one of the fastest growing nations in the world....The black government
was not 'aided and abetted,' to form a neutral government although the
country had a majority of more than 23 percent black....Blacks were more educated
than before and their words were being s p o k e n to help the country towards
a safer and cleaner country than before....Billions of dollars was spent
by govern!
ment to
aid the new government with members meeting on a weekly basis to increase employment
in government and other sectors of the country....Omar had smiled and cheered
the agreements by members because they had respected his ideas and thinking
and warned government if they don't agree to his w o r d s-The United States
could lag behind and face the once riddled turmoiled past....This book 'My
Father, The President,' is converted to 81 different languages for Africans, Spanish,
French, Arabians, Mexicans, Americans, Polish and Germans to understand
and lend an ear to government to aid the country towards becoming a better nation
that tainted many minds of the past...
Footprints Filmworks was ranked the fastest business in Africa after Omar's launch
of his business on the African Stock Exchange, Egypt Stock Exchange, Liberian
Stock Exchange, and Zambian Stock Exchange as his father had helped grow his
brain-child business in South Africa...Omar had often spoke to his father about
business and implementing trading partners here in the United States...
Omar had often heard stories about American's from their early childhood in the
early 1700's where they were to carry a pass to be recognized to today's modern
era where every man is a free man-unless he commits a felony against humanity....Although
members from Pakistan had told Abdulla to implement the death penalty
on offenders of the law, he had disagreed-saying that life was eternal
and the punishment for wars against crime be handled by the court of The United
States...He had addressed the government by saying that the maximum sentence
be- 30 years- to life- for offenders who had committed murder and related crimes...Minor
crimes would be granted amnesty as discussed in previous chapters..,Whilst
in 2018 many government officials were given the 'green light,' to intervene
in the local currency if need be...This was because American investors
had constantly bullied the South African rand by intervening in the local currency
during Japanese trading sessions...The American's dream was to have a weak
dollar and their dream was being realized as the country had become one of
the biggest export nations in the world...Thus being said the national currency
had strength and levels that were seen in the early 1980's were being experienced
by South African's...The rand had strengthened to R2.30 to a dollar by close
of night in late February 2018 to the American dollar with other indices
being highlighted as the fastest boomer in the nation including the Top40, Top100,
Satrix50 and the Footprints100.....
Some of the hobbies that I enjoy include ice-skating, water-rafting, decorating,
food, entertainment, reading, gaming, and internet roaming whilst Omar's hobbies
included politics, drama, love-making, driving, drama, news, children and
'yoga...' I would often wake up in the early hours of the morning and him sitting
by the early sun-rise mediating and praying...He said that he focused on
himself and focused his energy on creating awareness, appreciation, visualization
and imagination...Omar loved to bake in the sun because he said that he was
like a reptile that loved the sun...I would often visit the local community
with Omar and he would be the apple of people's eyes...It was something that drew
me to him that till today I cannot understand....I remember once I drew his
business company Footprints Filmworks in graffiti,calligraphy, and many forms
of writing style to which he always smiled...I had told him that no-newspaper
could advertise his business with so much personal love...He had taught me many
things whilst he sat in the sun saying that the right nostril is used to heat
the body, whilst the left nostril is used to cool the body...He had showed
me ways of using my left brain for creation and awareness and the right side
of my 'brain,' for emotion and feelings....I admired Omar because although he
had suffered many losses in his past, he still had the ability to focus on his
dreams and being the best person he could be....I loved the way he would often
spoil his children, his staff, his government members and anybody that had the
epic for life...Perhaps later on in this book, you as the reader will realize
why it's worth voting for a man who could lead The United States as President....
The Military in The U.S. under-went changes with the average person compiled to
the task of one year of service to the government before entry into university
or college...This was discussed with members of cabinet and decisions were reached
on the minimum age...According to the bill, once a person has reached the
age of 18, he/she will have to complete military service as a devotee to government...The
government would provide housing, food and wages of $4800.00 for
persons who join...This was not a law introduced as the government did provide
an option to members...The Department of Military had urged members to protect
the country and rid the country should the country be at threat with another
country...The workshops would strengthen mind, body and spirit and members
who chose to excel their work at the department could enrol to become pilots and
task fighters to the public...This was a decision that government had worked
on to improve the war against crime and a service to community members who wanted
to understand the meaning of being a patriot towards one nation...The bill
was passed in late February 2018 as a notation to South African's...Brazil
had agreed to this service as the country had also become part of the U.S. colony
increasing space for Americans by 60 percent...
Many community leaders had appreciated the work Omar did and does for the community
because they seen the sincere dedication to his country..,Whilst our children
were growing up fast one Sunday our son Akber had asked his father to a getaway
to a nearby community to learn the art of fishing...We had booked at a
river hotel at the Bulari river called Bulari Stream Lakes...I told my husband
that I would love to learn about fishing after all the books I read...We decided
to visit the Bulari river-One of The United States longest rivers...I was
clued up about the history of rivers and the type of fish that swam in the river...We
had spent the week using bait to catch fish...According to the personnel
he said that it was ideal time to catch swordfish, carp, river-fish and fresh-water
fish...I loved to raft with the boat we had hired...It was my first experience
to fish and the feeling brought back memories about the history of The
United States...I was told that the Obama diamond was found on the banks and
later sold to Queen Ayesha for 50 million rupees...We had not discovered any
diamonds, but caught eight fish...It was not the fishing that did the trick for
our family, it was the bonding between f a t h e r, mother and children that
touched my heart...Omar loved to teach his son how to 'catch fish,' and this
was an all-new experience for me...I realized that children all over the world
must have a father who cares, who loves, who shares and who dreams about his
family. Fishing was one of my greatest experiences because I got to throw Omar
in the ice-cold river...
Whilst meeting with members from the black community in The United States Omar
learnt about their beliefs, their faiths, their 'systems,' and their opportunities
for the future. He had learnt tree-hugging is a form of therapy for ones
mind and body and the blacks had taught him the importance of cleaning ones spirit
by this process...They had taught him that postulating towards the future
requires hard-work and the ability to work on goal-setting on a daily basis...One
of his friends had said that although blacks were known to be 'weary,' by
the Indian community, if given the opportunity they are kind and warm-hearted
people with a focus on their helpful attitude. This changed Omar's thinking because
it was portrayed in the media that blacks are criminals...He learnt that
almost 98 percent of blacks were 'honest,' and took their jobs in the country
as a way of change....Many had said that they love Omar's work towards his presidential
race in coming years...They had supported him by teaching him about
the Christian Church and 'uBuntu,' dress-code...Omar would often be invited
to weddings, functions, services and meetings with the black community to strenghten
his force within his community...He had learnt that blacks contribute to
23 percent of the national income and that blacks were building their legs up
the podium in The United States....Many had shared stories about their fathers,
their mothers, their children and their country...I remember that they always
loved my style and way with Omar....I always held Omar's hand because I learnt
the importance of what a wife suppose to be....Many Indians I have met are
lost about loving their husband because I learnt from blacks that no-matter
what love is the winner in any relationship...
Omar loved to fly his helicopter during weekends to places that were too dreamy
for me...We would often fly to Sun Park, Chicago National Gardens, The Lion's
Den and 'The Cradle of Humankind...' He had appreciated the love I showed towards
him by maintaining the romance in our relationship...I learnt that Sakeena,
Akber, Fathima, Zakiyyah and Ebrahim were the foundation of our relationship
and on a daily basis kept to my duties as a mother to them...They were growing
up with an attitude of friendship, sharing, love and 'excitement,' in their
lives. Omar never shared his children in public because he felt that the kids
place was our castle...I loved the way Omar would spend 'quality time,' with
each of his children-almost five hours in total per day caring for their needs...I
also realized that as Americans and civilians a child would never know how
much the parents love their children...I realized that growing up children is
a joint effort by both the parents...If one parent does not play their role,
the child is robbed of a 'super-natural,' upbringing....Sakeena loved her friends
and always wanted to impress them with her fame and style...Akber was hardworking
and loved his sisters Sakeena, Fathima, and Zakkiyah and went all out
for them...Fathima was a princess in the making and loved to cuddle by the fireplace...Zakiyyah
was a doll and loved attention from her father. Ebrahim was
still developing a personality and loved the concept of 'trying to walk...' I
loved my children with every beat of my heart as I shared memories with my husband
on Valentines Day 2018....Although I was born a boer I had sent my children
to Muslim, Hindu, French and Italian classes to better understand their culture
and nation. Omar once told me that the future of The United States is children.
---------------------------------------------------------------------------------------------------------------------------------------------------------
'My Father, The President,'
Chapter Ten
Thank you for r e a d i n g previous chapters of this best-seller book 'My Father,
The President,'...As I am writing this book in March 2018 the world is going
through many stages which I will discuss in latter chapters including the price
war against fuel, the American foreign policy, the South African market and
leaders who left a successful f o o t p r i n t in history...History is perhaps
the most studied subject by humans because it helps them gain an undertanding
of the future and enables past mistakes 'not to repeat themselves...' This
story is about a Man by the name of 'Omar Abdulla,' who plans to become President
of The United States in the year 2025, and if you are following this story,
the story begins in 2010, where one day he woke up with a vision to uplift
The United States by proclaiming the country as President...Since then he has
told me endless-stories that has led to me loving him and being his wife for
the last six years...This story is written by me, Alison Kells- as I wanted to
tell the story that would reach over a billion people internationally with the
focus of yesterday, today, and tomorrow...My daughter had whispered in my ear
this evening that the world needs cars that fly, perhaps an ideology in later
years...
I was stunned on the news that Omar will be acting in a film shot in India...It
turns out the Indians had loved his previous films he had acted in and wanted
to showcase his talent in a hindi film...It was a romantic star cast including
presidential titles and 'womens heart-felt moments....' He was notified of the
news and would take on the customer based in India. Omar had said that he loved
to act in films and took the opportunity without thinking based on the film
script and sound-tracks. Our family will visit India in June this year and
Omar has told producers to promote The United States in the film as an 'added
advantage,' towards the future...I always loved Omar when he was moody because
sometimes he would smile all day and other days he would have a frown on his
face if he did not achieve his goals set-out for that day. He had taken the project
in India because he learnt from the Indians in South Africa and could use
this platform to leverage his ethics about the future of the 'universe...' I
remember Omar's father had talked about the galaxy and his father believed that
we are beings created in the likeness of God....
Although Omar held several positions in government and was constantly bugged by
his fans in The United States, Canada, India and South Africa, he always told
me that his fun days were lost and visiting another country could eclipse his
heart towards a new-found love...Omar got bored of certain things that he did
on a daily basis, and by acting in another film will perhaps help his mind, body,
and spirit towards the love it once felt...I remember holding onto my husband
last evening, 'falling in love,' with him all over again...To you as a reader,
call it strange, or call it a dream from God, but I fell in love with Omar
all over again...It's funny...I guess dreams in your sleep from God is a message
from the Divine to appreciate and motivate your loved one on a daily basis....Omar
always gave me jitters in my tummy in the past, but this time it was
different...Perhaps the reality of marriage really 'knocked me out today....'
Romance and all the sweet words from your loved one is one thing, but living
and seeing the person for six years really feels good...Those readers who are
married for longer than the time I am married will perhaps share interest in
the meaning behind the feelings...Feelings are sometimes 'mixed,' from my part
because I felt what Omar felt...On the topic of moods, Omar was strong-hearted
and could deal with losses in business, trade, voters and friends but what really
hit him hard he never spoke about...Sometimes he would listen to music and
do his most favourite thing-sleep...Omar loved to sleep like it was going out
of fashion...I always knew that when he slept without producing results in
his business, something was on his mind...I would beg him to share his thoughts
but felt that I rather leave him alone before he goes into one of his 'arrogant
and don't care attitudes...' Perhaps when I meet his parents this Sunday I
will tell them how spoilt and moody he really is....Maybe, my children Sakeena
and Akber get this trait from his genetic code...American's will appreciate
this story!
by me b
ecause it tells a tale of The United States according to the research I have done
and interviews with over 60000 people from the country...Stay clued to Omar's
favourite business as the tale continues with Footprints Filmworks, Omar Abdulla
and Alison Kells.
When we arrived in Mumbai we were greeted by a whole host of Bollywood fans and
actors- and were rushed to a nearby hotel where Omar will be filming a film with
co-stars from India and one actress from South Africa...He did not need the
money to act in the feature but used the opportunity to 'market and promote,'
his talent in India...We would spend five weeks in Mumbai capturing scenes from
disco's to mountain range tops and Omar would use this film to market in The
United States when he leads The U.S. as President...Many community leaders
had urged him to work with the Indians as he would achieve a talent far-beyond
American cinema...Our children had come along with us and loved the experience
to watch their father behind boombing microphones, camera's, lighting and 'sound
stages...' His fans in India said that they would visit South Africa when
the film gets distributed in December 2018....I loved to watch the 'un-edited,'
version of Omar's performance because it dazzled me with awe...Omar's performances
could match the Indian actors including Shar Rukh Khan, Salman Khan, Aamir
Khan and Saif Ali Khan...He was widely advertised in India and many actors
had 'assisted,' him by visiting him on-screen at the film-arena...I remember
how he loved the 'tune and vibe,' of India purchasing the best of foreign goods
for his family...I also did a bit of shopping purchasing a sari-gown, scarfs,
lingerie and foreign machines....India is a vast country hosting thirty- one
religions with the most Hindu culture in the world...The country has an estimated
population of one billion people from all nations including Tamils, Muslims,
Christians and Punjabs... The country boasts the largest import nation grossing
sales of $566 bilion dollars per annum...The country is well-known in sports
including Cricket, Hockey, Football and Baseball....
Omar once told me that when he becomes President of The United States he would
introduce a further two hundred 'sporting activities,' in The United States...I
guess Omar's sexy legs and figure has to contribute to his more than two hours
per day excercise routine...I had also learnt from the Hindu's by visiting
the Ashram with friends of mine who taught me yoga, mediation, 'living lifestyle,'
and Guru mentality which I already practised with Omar. Food in India is
very vegetarain as the people believe that God takes the form of an animal....India
taught me that there is One God no-matter what name or reference we have
for him...India has some of the tallest buildings, long range mountains, 'streamy
rivers,' and friendliest people...My children has loved the country's public
arena and traffic routes...Some of the trains that we traveled in taught me
the language of the country and the teachings and beliefs of the nation.I had
loved India and it taught me that although India is one of the biggest countries,
the country is back-dated almost one hundred years because of how the people
think...The film was shot well and I hated Omar's actress because she constantly
flaunted herself with my Man...She kept on throwing herself against him
which I threw a big tantrum with her and Omar...Omar said that it was pure business
but I could see that she wanted more than friendship.Perhaps as a woman
we are the most jealous species in the universe....
Although Omar had 'topped,' World Number One on previous occasions in the world,
the Indians had nicknamed my husband 'Raj...' They had said that they loved
the way he smirked, the way he acted, the class and elegance he oozed and the
way he thought reminded them of a 'Raj...' I had blended well with the Indians
because I was brought up as a White-woman and Omar had told me that his grandfather
traveled from India to South Africa more than one hundred years ago...Before
we left Mumbai I had wept tears because it taught me so much, perhaps more
than I learnt in my life-time in The United States because of their traditional
values and their fatherly, motherly, brotherly and sisterly traditions.This
memory I will always store at the 'top of my hat,' of experiences....
When we arrived back in our community of Philadelphia I was thrilled by the fact
that American's from all over the country had flocked in bunches to meet with
Omar...The communities had reached out to him by forming relationships and creating
awareness in the country.Omar was well-known in The United States but
required a guiding force that would win his election in seven years.Although Omar
had seven years towards the U.S. presidency, ministers were starting to deepen
their pockets into American businesses, organizations, funds and 'merger
agreements...'Markets had met expectations with the dollar weakening to the lowest
level since 1970...Omar had kept to his promise almost five years ago and
reduced interest rates to match inflationary percentages...It was 'good news,'
that 87 percent of the country was employed and the country had to reduce interest
rates to compete with 'safe haven,' countries in Europe, Asia, North America
and South America...The United States was a dominant player in The World
winning awards as the 'most revenue,' achieved in 2018 exceeding market conditions
of the previous $121 trillion dollars last year...
On the eve of our anniversary for six years I was putting make-up on my face and
asked Omar that we should spend the evening with his parents because he felt
that he wanted to spend some time with his father, mother, siblings,grandparents
and friends that he knew personally...We had arranged for a private party
in Manhattan and invited my parents, my friends, my collegues and people who knew
me from the days I was a teenager...I was excited because I could put my hair
down and 'just chill...' I was 24 years old and Omar was 31 years and I had
something special planned for the 'after party...' I was six years with this
Man whom I knew I could love for the next fifty years although we had fights,
arguments, good gesture moments and shared five children...We had the fancy decorations
of life and I knew that if I stuck with him more of my childhood fantasies
will be realized....We had invited 200 guests to the party including some
of his friends from cabinet and people who wanted to show their face...I had
wore the sari-gown that I purchased in India whilst he wore a blue Michael
Jackson shirt and black tuxedo pants...He looked even hotter than the first time
we met...Here is a snapshot of some of the conversation we shared on our 'treasured
anniversary...'
Omar: Good Evening Ladies and Gentlemen...If you have any special requests you
will be going to have to listen to my voice for the next ten minutes...We are
gathered here today to celebrate the anniversary between Alison and I for the
last six years..W o r d s perhaps cannot express the emotions and feelings I have
to say, yet I feel that Alison has been a pillar of strenght and 'great inspiration,'
to me these last six years...I am thankful to her for her teaching
me so many things from the little things to the big things that matter in life...She
has taught me to respect the common man and be a father to my children...She
has taught me that no-matter what we should never loose sight of our dreams
and ambitions-even when things look bleak...She has taught me that with great
power comes great responsiblity...She has taught me that no-matter what fights
we have, we can always kiss and make up...She has taught me to be mature
in my thinking and not be niave in my actions...She has taught me to take the
risk in the future without worrying about what people say...We have traveled
to over fifty communities and five countries together which makes me look forward
to the next...I am thankful to her for her awesome cooking and friendly comments
when we meet new people...I am thankful to her for her love, friendship,
honesty and patience....I am thankful to her for blessing me with Sakeena, Akber,
Fathima, Zakiyyah and Ebrahim...I am thankful to her for the last six years
and the next fifty years...I love Alison because she brings out the best in
me...I love her because she has the personality to 'match the stars..' I love
her because she loves my parents the way I love my parents...I love her more
each day with the passage of time and one day when I walk with an old stick,
I will still hold her in my arms...I love you Alison....
Alison: I feel that I am saying my vows all over again...Whatever you said Omar,
take it as a magnet of words...I love you and enjoy the evening with us,,,,I
am a lady of few words and would like to tell Omar that I will be the woman with
him who holds his stick when he turns hundred...You are my superstar hunky
punk Omar...Always...
---------------------------------------------------------------------------------------------------------------------------------------------------------
Intermission
NMC Cookware is available at Falu's Fabrics in Laudium-521 Tangerine Street
Tel: (012) 3741493....Falu's Fabrics specializes in curtaining, Fabrics and material
'fabrics...'
----------------------------------------------------------------------------------------------------------------------------------------------------------
Winners Cash & Carry is located in the city of Cape Town and specializes in selling
brands to the wholesale community of South Africa...Prices too low to advertise...Visit
us today....13 Melkbos Street Mitchells Plain...Tel 013721106
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Cherry Berry guest lodge is located in George South Africa and is a five star hotel
that caters for families, friends, 'honeymoon couples,' and community leaders....Visit
our website for more details...Tel: 044 8734082....0834443264
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Future Fin Exotics is managed by Zunaid Moti and a host of other managing directors...Future
Fin provides private 'exotic,' cars for the businessman, father,
'media personality,' or the person who chooses to 'flaunt his style...' 011 888
88888....082777 7777....Limited offers available today....
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Kcarrim Group Holdings is managed by A B Carrim and associated directors...Kcarrim
specializes in hardware, sanitary equipment, paint and 'home-building material...'
160 Boom Street-Pretoria...012 3233925
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Zizi's Creations is the communities 'one and only,' choice for the design of weddings,
parties, 'tea-garden moments,' and related functions to the scope of
your 'fun finesse...' At Zizi's- we pride ourselves to provide the community with
the best for your weddings...Call Azizah or Zakiyyah Kolia-016 5563472- 0723982808
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Rearview Trading is an investment company into local and un-listed companies trading
on the Johannesburg Stock Exchange, New York Stock Exchange, and London
Stock Exchange...The company specializes in trading forex and bullion markets
in South Africa-012 3703469 0847867865....
----------------------------------------------------------------------------------------------------------------------------------------------------------
Advance Cash and Carry is one of Gauteng's biggest wholesalers to the public...Advance
Cash and Carry is managed by Sikander and Yusuf Kalla...30 Von Tonder
Street-Gauteng...012 666 7934/35...
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Taj Mahal Restaurants is the communities place to appreciate the value of fine
food...We cater for everyday meals, corporate functions and business meetings...231
Himalaya Street-Laudium..329 Aletta Street-Erasmia...012 3741778.
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Trend 'tap & tile,' is one of South Africa's largest distributor of tiles and related
products...We are located in over 81 communities in South Africa...TTT
is Managed by Mr. Mohammed Patel...0118350273....0823775000.
-----------------------------------------------------------------------------------------------------------------------------------------------------------
DJ's Autoglass is 'our communities,' fitment centre when it comes to glass for
cars, homes, building and other assorted glass...Dj's Autoglass is directed by
Dean Hira-012 3742445...0827141749
-----------------------------------------------------------------------------------------------------------------------------------------------------------
SHM Group of Companies is Directed by Sayed Mia to become one of the nations biggest
investors in properties, media, education and drama...Call us today to market
or sell your business...We are directors of the Trade Route Mall, Rosebank
Mall and Footprints Mall....30 Jellico Avenue-Rosebank...011 8805460...0827865622
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Gani Traders is one of South Africa's largest trading business specializing in
foreign exchange and bullion markets...Gani's Traders is managed by Akber and
Farhad Gani-0824401413
----------------------------------------------------------------------------------------------------------------------------------------------------------
Motordeal is one of the nations largest retail and wholesale seller of motor-cars
in South Africa...We stock a large range of cars ranging from R40 000-00-R4
million rand...We have over 800 cars to offer customers...Motordeal is directed
by Mr. Saloojee....011 8353535
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Chicken Licken South Africa is Managed and Directed by Arshaad Akoob-directing
over 100 branches of the franchise in South Africa...To find out more about franchise
opportunities or 'come-in and taste,' our world-class chicken....Tel:
012 3745856-0827861941
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Soft Training is located in Pretoria and provides customer-service for computers,
internet, 'host packages,' and a range of services related to computers...Soft
training is directed by Gordon James....
----------------------------------------------------------------------------------------------------------------------------------------------------------
WebWise Enterprise has 'launched,' WebWiz forums in association with Footprints
Filmworks and related companies...The company specializes in creating 'new websites,'
for persons, businesses, organizations and limited corporations...Please
call us today for a limited price quote...Call Sikander Abdulla-011 8885786-0828938123....
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Oceanway Studio's is one of South Africa's leading studio's for the recording of
films, music or anything related to show business...We are located in Cape Town
and easily located on a map near you....Call Pat Mcain-0837778384
----------------------------------------------------------------------------------------------------------------------------------------------------------
Fashionworld is the country's largest fashion Indian company located in the heart
of Pretoria-specializing in the manufacture and distribution of fashion design
wear....Fashionworld is directed Dr. Suliman Dockrat-0800204655
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=341763#341763
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: FF News: The Footprints Filmworks Stock Exchange |
To what, or to who do we owe this crap.
I thought this list was about airplanes. Some one ought to get this JOKER
banned from the list
----- Original Message -----
From: "footprints" <promise@webwiseenterprise.com>
Sent: Wednesday, June 01, 2011 3:13 PM
Subject: Zenith701801-List: FF News: The Footprints Filmworks Stock Exchange
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: FF News: The Footprints Filmworks Stock Exchange |
This happened once before from the same sender back on 2/9/10.
Maybe they are a lurker and accidentially sent the email to the wrong
address?
John Marzulli
http://MarzulliPhoto.net/
http://701Builder.blogspot.com/
On Wed, Jun 1, 2011 at 2:05 PM, Robert Pelland
<robert.pelland@cgocable.ca>wrote:
> robert.pelland@cgocable.ca>
>
>
> To what, or to who do we owe this crap.
>
> I thought this list was about airplanes. Some one ought to get this JOKER
> banned from the list
>
>
> ----- Original Message ----- From: "footprints" <
> promise@webwiseenterprise.com>
> To: <zenith701801-list@matronics.com>
> Sent: Wednesday, June 01, 2011 3:13 PM
> Subject: Zenith701801-List: FF News: The Footprints Filmworks Stock
> Exchange
>
>
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Routing the wires from the Y stick |
I'm looking at ways to route wires down from the grips and out the bottom of
the Y stick so that they don't kink, get pinched or chaffed. Since my 701
isn't rigged a related question is how much the stick can actually move fore
and aft and side to side when the control surfaces are actually connected.
Ideally the wires could exit at the pivot to minimize the relative movement
between the moving section in the stick and the fixed portion on the
fuselage. Alternatively if I bring the wires out the bottom I'll need a
large loop to provide enough slack for the stick to more to all extremes.
I won't have a lot of wires: pilot and copilot PTT, trim up/down and ground.
Maybe a spare wire for a bomb release, JATO fire, smoke, wipers, gear
retract, "No smoking" sign, seat massage/heater, espresso machine, flight
attendant call button, etc.
Any advice (and pictures) welcome.
-- Craig
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Routing the wires from the Y stick |
I ranthem out the bottom of the stick, then into the Tunnel and
on.......I had pilot/opilot PTT=99s. frequency flip flop and wires
for electric trim but it didn=99t take that much of a loop at the
bottomof the stick. Yes, you can see wires coming out of it, but they
are not in the way and safe from stpping on it, etc. Hardly noticable,
really.
From: Craig Payne
Sent: Wednesday, June 01, 2011 7:29 PM
Subject: Zenith701801-List: Routing the wires from the Y stick
I'm looking at ways to route wires down from the grips and out the
bottom of the Y stick so that they don't kink, get pinched or chaffed.
Since my 701 isn't rigged a related question is how much the stick can
actually move fore and aft and side to side when the control surfaces
are actually connected.
Ideally the wires could exit at the pivot to minimize the relative
movement between the moving section in the stick and the fixed portion
on the fuselage. Alternatively if I bring the wires out the bottom I'll
need a large loop to provide enough slack for the stick to more to all
extremes.
I won't have a lot of wires: pilot and copilot PTT, trim up/down and
ground. Maybe a spare wire for a bomb release, JATO fire, smoke, wipers,
gear retract, "No smoking" sign, seat massage/heater, espresso machine,
flight attendant call button, etc.
Any advice (and pictures) welcome.
-- Craig
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
I flew my 701 for 2 1/2 years with slats and bare aluminum, then this winter I
finally painted it and put wings back on, etc. I had previously recorded numbers
with slats, then slatless, and for the first time today flew it with VG's.
These are my first impressions with no slats and VG's. Unfortunately I only
had a short flight and it was a bumpy windy day. I had screwed up my pitot
tube connection and my electric trim tab needed tweaking so I had to keep some
forward pressure on during the flight.
When I took off I immediately realized that it was quite a different airplane.
Just eyeballing my airspeed indicator and not timing anything, I think I gained
a good 8 - 10 knots, maybe a hair more. It's not an SR-71 but I think I can
fly wing to wing with my buddies 150's. Initial impression was that it seemed
to climb as fast at a less steep angle than with VG's.
Mods include PVC fairings, paint, no slats but VG's, and cleaning up a lot of little
things here and there. Next few days are lousy weather but anxious to
get up and do some reasonably accurate recordings of new V speeds, stall ,etc.
I fixed all the little glitches from this flight and ready again for launch!
I did note it seems to land differently. My one gusty crosswind landing was kind
of lousy, but I felt the plane gliding more, and ballooning more when I flared.
I think I came in too fast which didn't help, either. With slats the plane
would have slowed rapidly and thunked down and stayed at that speed, but
with the VG's it seemed to float and balloon down the runway noticably more.
About how it acted slatless. I think my approach speed needs to be lessened.
I'll report when I get my new V speeds measured.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=341797#341797
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Routing the wires from the Y stick |
I drilled a small hole in the rear of the Y-stick where I wanted the wires
to come out. I used a grommet to keep the wire from rubbing against the
metal.
It worked well.
I'm looking at ways to route wires down from the grips and out the bottom of
the Y stick so that they don't kink, get pinched or chaffed. Since my 701
isn't rigged a related question is how much the stick can actually move fore
and aft and side to side when the control surfaces are actually connected.
Ideally the wires could exit at the pivot to minimize the relative movement
between the moving section in the stick and the fixed portion on the
fuselage. Alternatively if I bring the wires out the bottom I'll need a
large loop to provide enough slack for the stick to more to all extremes.
I won't have a lot of wires: pilot and copilot PTT, trim up/down and ground.
Maybe a spare wire for a bomb release, JATO fire, smoke, wipers, gear
retract, "No smoking" sign, seat massage/heater, espresso machine, flight
attendant call button, etc.
Any advice (and pictures) welcome.
-- Craig
Message 8
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Routing the wires from the Y stick |
I drilled a hole at the back of the "Y" stick so that the wires came out in
to =0Athe front of the torque tube.- I drilled a small hole in the side o
f the torque =0Atube aft of the seat front and brought the wires-out into
the tunnel.- From =0Athere I ran them under the passenger seat and up th
e the intercomm in the =0Apanel.- Yes of course, gromets on all of the ho
les.=0A=0AOne thing to be sure of!!!=0A=0AIf you are using the Zenith/ Aero
flash strobes, make sure that you keep as much =0Aphysical distance as poss
ible between any of the cableing to the intercomm =0A(audio, power, or PTT)
-and the power leads to you strobe packs.- Ask me how I =0A"tzott, tzot
t, tzott," know.=0A=0ADoug MacDonald=0ACH-701 from scartch=0ANW Ontario, Ca
nada=0A=0ADo Not Archive=0A=0A________________________________=0AFrom: Crai
g Payne <craig@craigandjean.com>=0ATo: zenith701801-list@matronics.com=0ASe
nt: Wed, June 1, 2011 7:29:47 PM=0ASubject: Zenith701801-List: Routing the
wires from the Y stick=0A=0A=0AI'm looking at ways to route wires down from
the grips and out the bottom of the =0AY stick so that they don't kink, ge
t pinched or chaffed. Since my 701 isn't =0Arigged a related question is ho
w much the stick can actually move fore and aft =0Aand side to side when th
e control surfaces are actually connected.=0A-=0AIdeally the wires could
exit at the pivot to minimize the relative movement =0Abetween the moving s
ection in the stick and the fixed portion on the fuselage. =0AAlternatively
if I bring the wires out the bottom I'll need a large loop to =0Aprovide e
nough slack for the stick to more to all extremes.=0A-=0AI won't have a l
ot of wires: pilot and copilot PTT, trim up/down and ground. =0AMaybe a spa
re wire for a bomb release, JATO fire, smoke, wipers, gear retract, =0A"No
smoking" sign, seat massage/heater, espresso machine, flight attendant call
=0Abutton, etc.=0A-=0AAny advice (and pictures) welcome.=0A-=0A-- Crai
-========================
================== =0A
Message 9
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Official Zenith701801-List FAQ (Frequently Asked Questions) |
Dear Listers,
Please read over the Zenith701801-List Frequently Asked Questions (FAQ) below.
The
complete Zenith701801-List FAQ including the Usage Guidelines can be found at the
following URL:
http://www.matronics.com/FAQs/Zenith701801-List.FAQ.html
Thank you,
Matt Dralle
Matronics Email List Administrator
[ Note: This FAQ was designed to be displayed with a fixed width font such as
Courier. Proportional fonts will cause display formatting errors. ]
This FAQ can also be viewed in HTML online at the following address:
http://www.matronics.com/FAQ/Zenith701801-List.htm
************************************************************
******* LIST POLICIES AND FREQUENTLY ASKED QUESTIONS *******
************************************************************
PLEASE READ. This document contains Zenith701801-List policies and information
for new and old subscribers. Understanding the Zenith701801-List policies will
minimize problems for the Administrator, and will help keep the Zenith701801-List
running smoothly for all of us.
******************************************
*** Quick Start Guide to List Features ***
******************************************
There are many features available on the Matronics Email Lists and each
one is described in detailed below. However, using the List Navigator
you can quickly access the complete set of features available for this
List. The List Navigator can be found at the following URL:
http://www.matronics.com/Navigator?Zenith701801-List
****************************************
*** How to Subscribe and Unsubscribe ***
****************************************
Simply go to the Web Page shown below and enter your email address and
select the List(s) that you wish to subscribe or unsubscribed from. You
may also use the handy "Find" function to determine the exact syntax of
your email address as it is subscribed to the List. Please see the
complete instructions at the top of the Web Page for more information.
The Subscribe/Unsubscribe web page is:
http://www.matronics.com/subscribe
Note that you will receive TWO conformation emails regarding your subsciption
process. The first verifies that your subscription/unsubsciption request
was received, and the second confirms that the process has been completed.
You should receive the first email within a few minutes of your request.
The second conformation will arrive in less than 24 hours. You cannot post
until you receive the second conformation email message.
*****************************
*** How to Post a Message ***
*****************************
Send an email message to:
zenith701801-list@matronics.com
Your message will be redistributed to everyone currently subscribed
to the List.
*****************************************************
*** SPAM Fighter - You Must be Subscribed to Post ***
*****************************************************
When a new post is received by the system, the From: line of the message
is checked and compared against the current subscription list. If the
email address is found, the message is passed on to the List Processor.
If the email address isn't found in the current list of subscribers, it
is dumped. This serves to very effectively thwart 99% of the SPAM that
gets posted to the Lists.
Remember, however, that the syntax of your email address is very important
with regard to the configuration of your email application such as Outlook
or Eudora. For example, the following two email addresses may be
functionally equivalent, but only one would pass the Matronics Email SPAM
test depending on which was syntax was subscribed to the given List:
smith@machine.domain.com
smith@domain.com
Either email address syntax is alright, just be sure that you configure
your email application to match *exactly* the address you've subscibed to
the List.
**************************************
*** Enclosure Support on the Lists ***
**************************************
Limited posting of enclosures such as pictures, documents, and spreadsheets
is supported on the Lists. There are a number of restrictions, and these
are detailed below. Please abide by the rules put forth regarding the
content of enclosures.
These are some of the features and limits of enclosures on the Matronics
Lists:
1) Enclosures will only be posted to the Real Time version of the Lists.
2) Enclosures will NOT be included in the Daily Digest version of the Lists.
3) Enclosures WILL BE forwarded on to the BBS Forum Web site.
4) Enclosures will NOT be appended to the Archives.
5) Enclosures will NOT be available in the List Browse feature.
6) Only the following file types and extensions will be allowed:
bmp doc dwg dxf gif jpg pdf png txt xls
All other enclosures types will be rejected and email returned to
sender. The enclosure types listed above are relatively safe from
a virus standpoint and don't pose a particularly large security risk.
7) !! All incoming enclosures will be scanned for viruses prior to posting
to the List. This is done in real time and will not slow down
the process of posting the message !!
Here are some rules for posting enclosures. Failure to abide by these rules
could result in the removal of a subscriber's email address from the Lists.
1) Pay attention to what you are posting!! Make sure that the files
you are enclosing aren't HUGE (greater that 1MB). Remember that there
are still people checking they're email via dial up modem. If you post
30MB worth of pictures, you are placing an unnecessary burden on these
folks and the rest of us, for that matter.
2) SCALE YOUR PICTURES DOWN!!! I don't want to see huge 3000 x 2000
pictures getting posted that are 3 or 4MB each. This is just
unacceptable. Use a program such as Photoshop to scale the picture
down to something on the order of 800 x 600 and try to keep the
file size to less-than 200KB, preferably much less.
Microsoft has a really awesome utility available for free that allows
you to Right-Click on a picture in Explorer and automatically
scale it down and resave it. This is a great utility - get it, use it!
http://www.microsoft.com/windowsxp/downloads/powertoys/xppowertoys.mspx
Look for the link "Image Resizer"
3) !! This would seem to go without saying, but I'll say it anyway. Do not
post anything that would be considered offensive by your grandmother.
And you know what I'm saying; I don't want to see anything even
questionable. !!
4) REMEMBER THIS: If you post a 1MB enclosure to a List with 1000 members
subscribed, your 1MB enclosure must be resent 1000 times amounting
to 1MB X 1000 = 1 Gigabyte of network traffic!! BE CAREFUL and
BE COURTEOUS!
Also see the section below on the Matronics Photo and File Share where
you can have your files and photos posted on the Matronics web server
for long time viewing and availability.
*******************
*** Digest Mode ***
*******************
Each day, starting at 12 midnight PST US, a new 'digest' will be started.
This digest will contain the same information that is currently appended
to the archive file. It has all of the headers except for the "From:"
and "Subject:" lines removed, and includes a message separator consisting
of a line of underscores.
Each day at 23:55 PST US, the day's messages as described above will be
combined and sent as a single message to everyone on the digest email list.
To subscribe to the digest list, use the same subscription web form
described above, and just select the Digest version of the List.
http://www.matronics.com/subscribe
Note that you *can* be subscribed to both the realtime and digest versions
of the List at the same time. This is perfectly acceptable.
Now some caveats:
* Messages sent to "zenith701801-list-digest" will be forwarded to the standard
email list. In other words, you cannot post messages only to the
digest List.
* If you are subscribed to both the regular List and the digest List, you
will receive the realtime postings as well as the digest at the end of
the day.
* If you reply to the digest email, your message will be forwarded to the
normal list associated with the digest. Important Note: Please change
the subject line to reflect the topic of your response! Also, please
*do not include all or most of the digest in your reply*.
****************************
*** List Digest Browser ***
****************************
An archive of all the List Digests can be found online in either plain text
or HTML format. These archives contain the exact Digest that was posted to
the Digest email list on the given day. The Digest Archives can be found
at the following location:
http://www.matronics.com/digest
*****************************************
*** The "DO NOT ARCHIVE" Message Flag ***
*****************************************
At times, your message may concern something that is revelent only to a very
small number of persons or to a limited area, and you may not wish to archive
it. In such a case, simply put the following phrase anywhere in the
message:
do not archive
Your message will not be appended to the archive, but will be sent to List
email distribution as normal.
**********************************************
***** READ THIS - Automatic Unsubscribes *****
**********************************************
Note that if your email address begins to cause problems such as bounced
email, mailbox is filled, or any other errors, your address will be promptly
removed from the List. If you discover that you are no longer receiving
messages from the Zenith701801-List, go to the following Web page, and look
for your email address and a possible reason for your removal.
The Matronics Email List uses utility called the "Email Weasel" that
automatically looks though the day's bounced email for addresses that
caused problems due to common things like "user is unknown", "mailbox
full", etc. If the Email Weasel removes your email address from the
Lists you will find record of it at the following URL:
http://www.matronics.com/unsubscribed
If the problem listed on the web site above has been resolved, please feel
free to resubscribe to the Lists of your choice.
*******************************
*** List Member Information ***
*******************************
If you have not done so already, please email me your phone numbers and
paper mail address in the following format:
smith@somehost.com
Joe Smith
123 Airport Lane
Tower, CA 91234-1234
098-765-1234 w
123-456-7890 h
Please forward this information to the following email address:
requests@matronics.com
I have a file of such things, that I typically use to contact you when
there are problems with your email address. The information will NOT
be used for any other commercial purpose.
****************************************
*** Realtime Web Email List Browsing ***
****************************************
Recent messages posted to the Zenith701801-List are also made available on
the Web for realtime browsing. Seven days worth of back postings are
available with this feature. The messages can be sorted by Subject,
Author, Date, or Message Thread. The Realtime List Browser indexes are
updated twice per hour at xx:15 and xx:45. You can also reply to a message
or start a new message directly from the List Browser Interface (coming soon).
You do not have to be subscribed to the given list to use the List
Browser Interface in view-mode.
http://www.matronics.com/browselist/zenith701801-list
*******************************************
*** Web Forums Bulletin Board Interface ***
*******************************************
A phpBB BBS web Forums front end is available for all Zenith701801-List content.
content. The Forums contain all of the same content available via the email
distribution and found on the various archive viewing formats such as the
List Browse, etc. Any posts on the web Forums will be cross posted to the
respective email List, and posts to the Email List will be cross posted to
the web Forums.
You may view all List content on the Forums without any special login.
If you wish to post a message via the Web Forum interface, however, you
will need to Register. This is a simple process that takes only a few
minutes. A link to the Registration page can be found at the top of the
main web Forums page. Note that registering on the Forum web site also
enables you to send email posts to the Lists as well. You will also need to
Subscribe to the respective Email List as described above to receive the
Email Distribution of the List, however.
The Matroincs Email List Web BBS Forums can be found at the following URL:
http://forums.matronics.com
*********************************
*** Matronics Email List Wiki ***
*********************************
In an attempt to make it easy to store and find structured and often accessed
information, Matronics has installed a Wiki at:
http://wiki.matronics.com
The Wiki allows individuals to create web pages to contain useful information
for other users of the mailing lists and web site. Unlike an ordinary web page
where the content needs to be submitted to Matronics for inclusion, the Wiki
permits the users to construct their own pages and have them visible immediately.
While constructing pages for the Wiki is not difficult, some may not be
comfortable building pages. In that case, simply prepare the text and any
images and email it to:
wiki-support@matronics.com
One of the volunteers on that list will take your submission and construct
a Wiki page for you.
Often someone produces a particularly useful posting in email one one of the
Lists that would be of general interest. In that case Matronics may take that
post and convert it into a Wiki page.
*********************
*** List Archives ***
*********************
A file containing of all of the previous postings to the Zenith701801-List is
available on line. The archive file information is available via the
Web and FTP in a number of forms. Each are briefly described below:
* Zenith701801-List.FAQ
- Latest version of the Zenith701801-List Frequently Asked Question
page (this document).
* Zenith701801-Archive.digest.complete
- Complete file with most of the email header info removed and
page breaks inserted between messages.
* Zenith701801-Archive.digest.vol-??
- Same as the file above, but broken up into small sections that
can more easily handled.
* Zenith701801-Archive.digest.complete.zip
- Same as the Zenith701801-Archive.digest.complete file above, but
in PKZIP format. Use "binary" data transfer methods.
* Zenith701801-Archive.digest.complete.Z
- Same as the Zenith701801-Archive.digest.complete file above, but
in
UNIX compress format. Use "binary" data transfer methods.
Download Via FTP
----------------
The archive file is available via anonymous FTP from ftp.matronics.com
in the "/pub/Archives" directory. It is updated daily and can be found in
a number of formats as described above. (All filenames are case sensitive.)
ftp://ftp.matronics.com/pub/Archives
Download Via Web
----------------
The archives are also available via a web listing. These can be found
toward the bottom of the following web page:
http://www.matronics.com/archives
******************************************
*** Complete List Web Archive Browsing ***
******************************************
All messages posted to the Zenith701801-List are also available using the
Email List Archive Browsing feature. With this utility, all messages
in the List are indexed, and individual sub-archives can be browsed.
http://www.matronics.com/archive/archive-index.cgi?Zenith701801
*****************************************
**** High-Speed Archive Search Engine ***
*****************************************
You can use the custom, high-performance Matronics Email List Search Engine
to quickly locate and browse any messages that have been posted to the
List. The Engine allows the user to easily search any of the currently
available List archives.
http://www.matronics.com/search
****************************
*** File and Photo Share ***
****************************
With the Matronics Email List File and Photo Share you can share pictures
and other data with members of the List without having to forward a
copy of it to everyone. To share your Files and Photos, simply email
them to:
pictures@matronics.com
!! ==> Please including the following information with each submission:
1) Email Lists that they are related to.
2) Your Full Name.
3) Your Email Address.
4) One line Subject description.
5) Multi-line, multi-paragraph description of topic.
6-x) One-line Description of each photo or file
Prior to public availability of the files and photos, each will be scanned
for viruses. Please also note that the process of making the files and
photos available on the web site is a pseudo-manual process, and I try to
process them every few days.
Following the availability of the new Photoshare, an email message will be
sent to the Email Lists enumerated in 1) above indicating that the new
Share is available and what the direct URL to it is.
For a current list of available Photoshares, have a look at the Main
Index Page:
http://www.matronics.com/photoshare
**************************
*** List Archive CDROM ***
**************************
A complete Matronics Email List Archive CD is available that contains
all of the archives since the beginning of each of the Lists. The archives
for all of the Lists are included on the CD along with a freeware search
engine written by a list member. The CD is burned the day you order it
and will contain archive received up to the last minute. They make
great gifts!
http://www.matronics.com/ArchiveCDROM
**********************************
*** List Support Contributions ***
**********************************
The Matronics Lists are run *completely* through the support of it members.
You won't find any PopUpAds, flashing Banner ads, or any other form of
annoying commercialism on either the Email Messages or the List web pages
associated with the Matronics Email Lists. Every year during November
I run a low-key, low-pressure "Fund Raiser" where, throughout the month,
I ask List members to make a Contribution in any amount with which they
are comfortable.
I will often offer free gifts with certain contribution levels during the
Fund Raiser to increase the participation. The gifts are usually donated
by companies that are themselves List members.
Your Contributions go directly to supporting the operation of the Lists
including the high-speed, business-class Internet connection, server
system hardware and software upgrades, and to partially offset the many
many hours I spend running, maintaining, upgrading, and developing the
variety of services found here.
Generally Contributions range from $20 to $100 and are completely voluntary
and non-compulsory. I ask only that if person enjoys the Lists and obtains
value from them, that they make a Contribution of equal magnitude.
Contributions are accepted throughout the year, and if you've just
subscribed, feel free to make a Contribution when you've settled in.
The website for making SSL Secure Contributions is listed below. There are
a variety of payment methods including Visa and MasterCard, PayPal, and
sending a personal check.
If you enjoy and value the List, won't you make a Contribution today to
support its continued operation?
http://www.matronics.com/contributions
Thank you!
Matt Dralle
Email List Administrator
******************************************************************************
Zenith701801-List Usage Guidelines
******************************************************************************
The following details the official Usage Guidelines for the Zenith701801-List.
You are encouraged to read it carefully, and to abide by the rules therein.
Failure to use the Zenith701801-List in the manner described below may result
in the removal of the subscribers from the List.
Zenith701801-List Policy Statement
The purpose of the Zenith701801-List is to provide a forum of discussion for
things related to this particular discussion group. The List's goals
are to serve as an information resource to its members; to deliver
high-quality content; to provide moral support; to foster camaraderie
among its members; and to support safe operation. Reaching these goals
requires the participation and cooperation of each and every member of
the List. To this end, the following guidelines have been established:
- Please keep all posts related to the List at some level. Do not submit
posts concerning computer viruses, urban legends, random humor, long
lost buddies' phone numbers, etc. etc.
- THINK carefully before you write. Ask yourself if your post will be
relevant to everyone. If you have to wonder about that, DON'T send it.
- Remember that your post will be included for posterity in an archive
that is growing in size at an extraordinary rate. Try to be concise and
terse in your posts. Avoid overly wordy and lengthy posts and
responses.
- Keep your signature brief. Please include your name, email address,
aircraft type/tail number, and geographic location. A short line
about where you are in the building process is also nice. Avoid
bulky signatures with character graphics; they consume unnecessary
space in the archive.
- DON'T post requests to the List for information when that info is
easily obtainable from other widely available sources. Consult the
web page or FAQ first.
- If you want to respond to a post, DO keep the "Subject:" line of
your response the same as that of the original post. This makes it
easy to find threads in the archive.
- When responding, NEVER quote the *entire* original post in your
response. DO use lines from the original post to help "tune in" the
reader to the topic at hand, but be selective. The impact that
quoting the entire original post has on the size of the archive
can not be overstated!
- When the poster asks you to respond to him/her personally, DO NOT
then go ahead and reply to the List. Be aware that clicking the
"reply" button on your mail package does not necessarily send your
response to the original poster. You might have to actively address
your response with the original poster's email address.
- DO NOT use the List to respond to a post unless you have something
to add that is relevant and has a broad appeal. "Way to go!", "I
agree", and "Congratulations" are all responses that are better sent
to the original poster directly, rather than to the List at large.
- When responding to others' posts, avoid the feeling that you need to
comment on every last point in their posts, unless you can truly
contribute something valuable.
- Feel free to disagree with other viewpoints, BUT keep your tone
polite and respectful. Don't make snide comments, personally attack
other listers, or take the moral high ground on an obviously
controversial issue. This will only cause a pointless debate that
will hurt feelings, waste bandwidth and resolve nothing.
- Occasional posts by vendors or individuals who are regularly
subscribed to a given List are considered acceptable. Posts by
List members promoting their respective products or items for sale
should be of a friendly, informal nature, and should not resemble
a typical SPAM message. The List isn't about commercialism, but
is about sharing information and knowledge. This applies to
everyone, including those who provide products to the entire
community. Informal presentation and moderation should be the
operatives with respect to advertising on the Lists.
-------
[This is an automated posting.]
do not archive
Message 10
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Official Zenith701801-List Usage Guidelines |
Dear Listers,
Please read over the Zenith701801-List Usage Guidelines below. The complete
Zenith701801-List FAQ including these Usage Guidelines can be found at the
following URL:
http://www.matronics.com/FAQs/Zenith701801-List.FAQ.html
Thank you,
Matt Dralle
Matronics Email List Administrator
******************************************************************************
Zenith701801-List Usage Guidelines
******************************************************************************
The following details the official Usage Guidelines for the Zenith701801-List.
You are encouraged to read it carefully, and to abide by the rules therein.
Failure to use the Zenith701801-List in the manner described below may result
in the removal of the subscribers from the List.
Zenith701801-List Policy Statement
The purpose of the Zenith701801-List is to provide a forum of discussion for
things related to this particular discussion group. The List's goals
are to serve as an information resource to its members; to deliver
high-quality content; to provide moral support; to foster camaraderie
among its members; and to support safe operation. Reaching these goals
requires the participation and cooperation of each and every member of
the List. To this end, the following guidelines have been established:
- Please keep all posts related to the List at some level. Do not submit
posts concerning computer viruses, urban legends, random humor, long
lost buddies' phone numbers, etc. etc.
- THINK carefully before you write. Ask yourself if your post will be
relevant to everyone. If you have to wonder about that, DON'T send it.
- Remember that your post will be included for posterity in an archive
that is growing in size at an extraordinary rate. Try to be concise and
terse in your posts. Avoid overly wordy and lengthy posts and
responses.
- Keep your signature brief. Please include your name, email address,
aircraft type/tail number, and geographic location. A short line
about where you are in the building process is also nice. Avoid
bulky signatures with character graphics; they consume unnecessary
space in the archive.
- DON'T post requests to the List for information when that info is
easily obtainable from other widely available sources. Consult the
web page or FAQ first.
- If you want to respond to a post, DO keep the "Subject:" line of
your response the same as that of the original post. This makes it
easy to find threads in the archive.
- When responding, NEVER quote the *entire* original post in your
response. DO use lines from the original post to help "tune in" the
reader to the topic at hand, but be selective. The impact that
quoting the entire original post has on the size of the archive
can not be overstated!
- When the poster asks you to respond to him/her personally, DO NOT
then go ahead and reply to the List. Be aware that clicking the
"reply" button on your mail package does not necessarily send your
response to the original poster. You might have to actively address
your response with the original poster's email address.
- DO NOT use the List to respond to a post unless you have something
to add that is relevant and has a broad appeal. "Way to go!", "I
agree", and "Congratulations" are all responses that are better sent
to the original poster directly, rather than to the List at large.
- When responding to others' posts, avoid the feeling that you need to
comment on every last point in their posts, unless you can truly
contribute something valuable.
- Feel free to disagree with other viewpoints, BUT keep your tone
polite and respectful. Don't make snide comments, personally attack
other listers, or take the moral high ground on an obviously
controversial issue. This will only cause a pointless debate that
will hurt feelings, waste bandwidth and resolve nothing.
- Occasional posts by vendors or individuals who are regularly
subscribed to a given List are considered acceptable. Posts by
List members promoting their respective products or items for sale
should be of a friendly, informal nature, and should not resemble
a typical SPAM message. The List isn't about commercialism, but
is about sharing information and knowledge. This applies to
everyone, including those who provide products to the entire
community. Informal presentation and moderation should be the
operatives with respect to advertising on the Lists.
-------
[This is an automated posting.]
do not archive
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|