Today's Message Index:
----------------------
1. 05:29 AM - Re: Cutting Control Cables (Harvey Richards)
2. 05:31 AM - Ring mount to 912 (Harvey Richards)
3. 08:45 AM - Cutting control cables (Victor Menkal)
4. 09:06 AM - Re: Cutting control cables (MacDonald Doug)
5. 09:07 AM - Re: Cutting control cables (Tommy Walker)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Cutting Control Cables |
I just drew the center wire out, cut in vise at slight angle then filed. Then
put the center wire in and cut that to length.
--------
CH 701
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=344222#344222
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Ring mount to 912 |
Could someone please tell me the torque value for the Ring mount M10 Allen bolts
to the Rotax 912? Thanks.
--------
CH 701
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=344223#344223
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Cutting control cables |
Hi John. The cables Im working with all have solid core control wire. The
issue Im trying to solve is cutting the spiral wound outer sleeve. Tried using
cut off wheel on dremel tool but the heat melts the inner antifriction sleeve.
Appreciate the help.
Cheers Vic
Victor Menkal,P.Eng.
Vista Tek Ltd.
803 Wood Street
Whitehorse, Yukon, Canada
Y1A 2G6
1 867 334-5330
vmenkal@mac.com
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Cutting control cables |
When I did mine, I pulled back the inner cable and cut the spiral sleave wi
th a =0Agood set of diagnal (side) cutters.- The spiral is tough stuff bu
t it worked =0Awell for me.=0A=0ADoug MacDonald=0ACH-701 from Scratch=0ANW
Ontario, Canada=0A=0ADo not archive=0A=0A=0A=0A=0A_________________________
_______=0AFrom: Victor Menkal <vmenkal@mac.com>=0ATo: zenith701801-list@mat
ronics.com=0ASent: Mon, June 27, 2011 10:42:12 AM=0ASubject: Zenith701801-L
ist: Cutting control cables=0A=0AHi John. - The cables Im working with al
l have solid core control wire. - -The =0Aissue Im trying to solve is c
utting the spiral wound outer sleeve. - -Tried =0Ausing cut off wheel o
n dremel tool but the heat melts the inner antifriction =0Asleeve. --
=0A=0AAppreciate the help.=0A=0ACheers Vic=0A=0AVictor Menkal,P.Eng.=0AVist
a Tek Ltd.=0A803 Wood Street=0AWhitehorse, Yukon, Canada=0AY1A 2G6=0A1 867
334-5330=0Avmenkal@mac.com
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Cutting control cables |
Hi,
I used a fine tooth hack saw and then dressed up the inner sleeve with a
small pointed round file.
Tommy Walker
Do Not Archive
On Mon, Jun 27, 2011 at 10:42 AM, Victor Menkal <vmenkal@mac.com> wrote:
> Hi John. The cables Im working with all have solid core control wire.
> The issue Im trying to solve is cutting the spiral wound outer sleeve.
> Tried using cut off wheel on dremel tool but the heat melts the inner
> antifriction sleeve.
> Appreciate the help.
>
> Cheers Vic
>
> *Victor Menkal,P.Eng.*
> Vista Tek Ltd.
> 803 Wood Street
> Whitehorse, Yukon, Canada
> Y1A 2G6
> 1 867 334-5330
> vmenkal@mac.com
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|