Today's Message Index:
----------------------
1. 04:58 AM - Re: 750 vs 701 rudder (MacDonald Doug)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: 750 vs 701 rudder |
I scratch built my 701 rudder about five years ago and I helped kit build a CH-750
rudder about two years ago. The only difference between the two was the spar
material and possibly the spar doublers. In fact, the rudder plans used for
the 750 are the 701 plans. The part numbers are all 7-xxx instead of 75-xxx like
the rest of the 750.
Now that being said, themost recent701 rudders have the new heavier spar as well.
This makes the rudders interchangable between the 701 and 750. According to
Caleb or Roger (can't remember which one I asked) the heavier spar was not necessary
for the 701 but was upgraded specifically to keep the two rudders the
same.
Doug MacDonald
CH-701 from scratch
NW Ontario, Canada
Do Not Archive
----- Original Message -----
From: Walker27 <sean@wispertel.net>
Cc:
Sent: Sunday, July 17, 2011 7:52:13 PM
Subject: Zenith701801-List: 750 vs 701 rudder
Besides the spar being changed to .032 did Zenith change anything else such as
the ribs, skins, horn etc....
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|