---------------------------------------------------------- Zenith701801-List Digest Archive --- Total Messages Posted Tue 08/21/12: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:54 AM - Brake cylinders (Bob Gibfried) 2. 05:08 AM - Re: Brake cylinders (Doug MacDonald) 3. 03:41 PM - Parts Needed!!! (Stripling Cliff & Carolyn) 4. 04:10 PM - Re: Parts Needed!!! (John Marzulli) 5. 04:30 PM - Re: Parts Needed!!! (ron wehba) 6. 05:20 PM - Master relay for sale (sonar1@cox.net) 7. 05:24 PM - Re: Parts Needed!!! (Stripling Cliff & Carolyn) ________________________________ Message 1 _____________________________________ Time: 04:54:22 AM PST US From: "Bob Gibfried" Subject: Zenith701801-List: Brake cylinders Can anyone suggest some good brake cylinders? My cylinders are not adaptable to a remote resivore. Bleeding the cylinders is a pain and I want to eliminate this task. Bob ________________________________ Message 2 _____________________________________ Time: 05:08:06 AM PST US Subject: Re: Zenith701801-List: Brake cylinders From: Doug MacDonald The matcos that come with the kit are fine. Are you bleeding them by pumping fluid up from the wheel like you are supposed too? If you try to bleed like a car it won't work very well. If you need more info let us know. Doug M CH 701 Sent from my iPad On 2012-08-21, at 6:53 AM, "Bob Gibfried" wrote: > > Can anyone suggest some good brake cylinders? My cylinders are not adaptable to a remote resivore. Bleeding the cylinders is a pain and I want to eliminate this task. > > Bob > > > > ________________________________ Message 3 _____________________________________ Time: 03:41:38 PM PST US From: Stripling Cliff & Carolyn Subject: Zenith701801-List: Parts Needed!!! I am an old builder of 4 previous (Quickie, Kolb, Piper Cub and RV7A) airplanes. My newly acquired unfinished and incomplete CH701 project came from Canada. I live in Central Texas. Loooong hauling trip! Back then in 1987, the engine and FWF was the Rotax 532. I may try to resurrect the engine (brand new but very dated) if I can do it on the cheap. If not, I will use a 582. I am in need of the complete custom Rotax exhaust system, the throttle bell crank and nose fork to foot pedals control tubes as well as likely other parts. Anyone, have any of these? Thanks! Cliff ________________________________ Message 4 _____________________________________ Time: 04:10:52 PM PST US Subject: Re: Zenith701801-List: Parts Needed!!! From: John Marzulli Can you use the current nose strut and fork that Zenith sell? John Marzulli http://MarzulliPhoto.net/ http://701Builder.blogspot.com/ On Tue, Aug 21, 2012 at 3:41 PM, Stripling Cliff & Carolyn < striplic@gmail.com> wrote: > I am an old builder of 4 previous (Quickie, Kolb, Piper Cub and RV7A) > airplanes. > My newly acquired unfinished and incomplete CH701 project came from > Canada. I > live in Central Texas. Loooong hauling trip! Back then in 1987, the engine > and > FWF was the Rotax 532. I may try to resurrect the engine (brand new but > very > dated) if I can do it on the cheap. If not, I will use a 582. I am in need > of > the complete custom Rotax exhaust system, the throttle bell crank and nose > fork > to foot pedals control tubes as well as likely other parts. Anyone, have > any of > these? Thanks! Cliff > > * > > * > > ________________________________ Message 5 _____________________________________ Time: 04:30:10 PM PST US From: ron wehba Subject: Re: Zenith701801-List: Parts Needed!!! where in central texas?/=0A-=0A=0Aronnie wehba=0A =0A=0A_________________ _______________=0A From: John Marzulli =0ATo: zeni th701801-list@matronics.com =0ASent: Tuesday, August 21, 2012 6:10 PM=0ASub ject: Re: Zenith701801-List: Parts Needed!!!=0A =0A=0ACan you use the curr ent nose strut and fork that Zenith sell?=0A=0AJohn Marzulli=0A=0Ahttp://Ma rzulliPhoto.net/=0Ahttp://701Builder.blogspot.com/=0A=0A=0A=0AOn Tue, Aug 2 1, 2012 at 3:41 PM, Stripling Cliff & Carolyn wrote: =0A=0AI am an old builder of 4 previous (Quickie, Kolb, Piper Cub and RV7A) airplanes.=0A>My newly acquired unfinished and incomplete CH701 project ca me from Canada. I=0A>live in Central Texas. Loooong hauling trip! Back then in 1987, the engine and=0A>FWF was the Rotax 532. I may try to resurrect t he engine (brand new but very=0A>dated) if I can do it on the cheap. If not , I will use a 582. I am in need of=0A>the complete custom Rotax exhaust sy stem, the throttle bell crank and nose fork=0A>to foot pedals control tubes as well as likely other parts. Anyone, have any of=0A>these? Thanks! Cliff =0A>ist" target="_blank">http://www.matronics.com/Navigator?Zenith701801 -List=0Atp://forums.matronics.com=0A_blank">http://www.matronics.com/contri ======================= ________________________________ Message 6 _____________________________________ Time: 05:20:24 PM PST US Subject: Zenith701801-List: Master relay for sale From: "sonar1@cox.net" I bought this [b] MASTER RELAY[/b] for my 701, but never used it. Still in the plastic bag: http://www.aircraftspruce.com/catalog/elpages/masterrelay.php Selling for $15 including shipping..........Fred Also have an Airgizmo gps panel mount for the 396 type gps's. http://www.aircraftspruce.com/catalog/avpages/airgizmos.php Selling for $45 including shipping.............Fred [/b] Read this topic online here: http://forums.matronics.com/viewtopic.php?p=381491#381491 ________________________________ Message 7 _____________________________________ Time: 05:24:16 PM PST US From: Stripling Cliff & Carolyn Subject: Re: Zenith701801-List: Parts Needed!!! On Aug 21, 2012, at 6:29 PM, ron wehba wrote: > where in central texas?/ Marble Falls, Texas > > > ronnie wehba > From: John Marzulli > To: zenith701801-list@matronics.com > Sent: Tuesday, August 21, 2012 6:10 PM > Subject: Re: Zenith701801-List: Parts Needed!!! > > Can you use the current nose strut and fork that Zenith sells? I have those parts. Mine is the older style light weight fork, but it should be serviceable since I will be using a very light engine. You know how it is... when you buy a "complete" kit, there are always parts that somehow disappear over the years. > > John Marzulli > > http://MarzulliPhoto.net/ > http://701Builder.blogspot.com/ > > > On Tue, Aug 21, 2012 at 3:41 PM, Stripling Cliff & Carolyn wrote: > I am an old builder of 4 previous (Quickie, Kolb, Piper Cub and RV7A) airplanes. > My newly acquired unfinished and incomplete CH701 project came from Canada. I > live in Central Texas. Loooong hauling trip! Back then in 1987, the engine and > FWF was the Rotax 532. I may try to resurrect the engine (brand new but very > dated) if I can do it on the cheap. If not, I will use a 582. I am in need of > the complete custom Rotax exhaust system, the throttle bell crank and nose fork > to foot pedals control tubes as well as likely other parts. Anyone, have any of > these? Thanks! Cliff > > > ist" target="_blank">http://www.matronics.com/Navigator?Zenith701801-List > tp://forums.matronics.com > _blank">http://www.matronics.com/contribution > > > http://www.matronics.com/Navigator?Zenith701801-List > > > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message zenith701801-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Zenith701801-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/zenith701801-list Browse Digests http://www.matronics.com/digest/zenith701801-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.