---------------------------------------------------------- Zenith701801-List Digest Archive --- Total Messages Posted Thu 03/21/13: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:58 AM - New 750 Cruiser?? (JC Gilpin) 2. 11:31 AM - Re: Zenith701801-List Digest: 5 Msgs - 03/20/13 (Dave and Pam Fisher) 3. 04:23 PM - Re: Zenith701801-List Digest: 5 Msgs - 03/20/13 (AJR) 4. 04:54 PM - Re: Re: Zenith701801-List Digest: 5 Msgs - 03/20/13 (David L. Orr) ________________________________ Message 1 _____________________________________ Time: 12:58:30 AM PST US Subject: Zenith701801-List: New 750 Cruiser?? From: JC Gilpin Hey guys, have a look about halfway down the page in this blog, in the section titled =93Visit to Zenair=94. http://airdriebell.wordpress.com/ That=92s a cleaned up 750 that Zenith has built and has been testing. No slats, long wing, streamlining over the cabin, and symmetrical horizontal stabilizer. Note that it also has a fixed vertical stabilizer, like the Savannah. It=92ll be like a larger Savannah, which is just what=92s needed . I reckon it=92ll go really well! It=92ll cruise faster for x-country, carry a good load, and still have enough STOL capability for real life short fields. Shouldn=92t cost any more than the old 750, and even easier to build, so will be great value for the home-builder. I sure hope they follow through and put it in production! Those are the same mods (except for the vert stab) that we=92ve proven so well on Hans=92 701, and it goes great now! It=92s going to prove itself i n the next couple of weeks when we fly to Tasmania. When we last flew there in 2006, Hans still had slats on his 701, while I had just removed the slats from my Savannah. I had to throttle way back to stay with him on that trip. At the first fuel stop, my aircraft took a lot less fuel than his=85. Hans was recording the numbers on the pump, and we first thought he=92d made a mistake, but every fuel stop after was the same. Over the whole 50 hour trip I used $200 less fuel than he did. As soon as we got home he removed his slats and lengthened his wings, and since then he=92s also streamlined over the cabin and fitted a symmetrical horiz stab, and now we=92re pretty much equal in performance. We used to cruise at 5000rpm or less, but the Rotax experts are saying that it=92s better for the engine at 5200rpm, so that=92s how we=92ll go on this trip. At that power we go 86kts (99mph) when the aircraft are light. When we=92re fully loaded up to 545kg (1200lb) for travelling, that speed goes down to 80kts (92mph), at a fuel burn of 18 litres/hr (4.7usgal/hr). So that=92s still 19.6 mpg, pretty good for such an aircraft at full load at that speed. With the original 701 slats and short wings, when Hans was loaded heavy, his fuel consumption was horrendous, but now it=92s much improved. This time he=92ll save more like $300 at today=92s fuel prices. Anyhow, I think all this experience indicates that this new 750 could be a really great cruising aircraft, just what=92s needed I reckon. Once again, I sure hope they follow through and put it in production. Maybe need to lobby Zenith to push for that..... I spent last summer touring the western USA with a Kolb ultralight in a trailer, and flew from 48 airfields in 14 states. See the story at http://www.tailwindsplease.com/ I found the USA to be just the greatest place for touring in light aircraft! Spectacular scenery in every direction, even better when seen from the air, as you can see! And lots of good little friendly airfields, most with pilot=92s lounges, and many with courtesy cars, makes it so easy and convenient. I=92m envious as heck for the opportunities that you have there=85.. Tailwinds Always, JG ________________________________ Message 2 _____________________________________ Time: 11:31:00 AM PST US From: Dave and Pam Fisher Subject: Zenith701801-List: Re: Zenith701801-List Digest: 5 Msgs - 03/20/13 Thanks Chuck, You may be right .We'll see. I basically traded the weight of the slats for the wing extensions. I'm non electric so no battery. My prop is a relatively light wood prop. My panel is very basic VFR. I could go tubeless on the tires. If I go with minimal paint I might come close to an empty weight of 600#. A safer guess might be 600 # to 650 # since the little stuff does add up. Thanks for the input! Dave At 01:00 AM 3/21/2013, you wrote: >I have a Jab 2200 at about 140 pounds in my 701 for a dry weight of 570#. M >y 701 is very simple and before the SP version. Getting a dry weight of 600 ># with longer wings (not much weight there) and an A80 may be hard. > > ________________________________ Message 3 _____________________________________ Time: 04:23:12 PM PST US From: "AJR" Subject: Zenith701801-List: Re: Zenith701801-List Digest: 5 Msgs - 03/20/13 Hi Guys anyone know of information or a kit to install a starter on an A65 continental..My friend has the A65 on his 701 and has to hand crank it to get it going..Makes it a little difficult if it stops in flight..Also he is looking for a used set of bubble doors for the same unit. Any information would be appreciated Alvin Rose -----Original Message----- From: Zenith701801-List Digest Server Sent: Thursday, March 21, 2013 4:30 AM Subject: Zenith701801-List Digest: 5 Msgs - 03/20/13 * ================================================= Online Versions of Today's List Digest Archive ================================================= Today's complete Zenith701801-List Digest can also be found in either of the two Web Links listed below. The .html file includes the Digest formatted in HTML for viewing with a web browser and features Hyperlinked Indexes and Message Navigation. The .txt file includes the plain ASCII version of the Zenith701801-List Digest and can be viewed with a generic text editor such as Notepad or with a web browser. HTML Version: http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 13-03-20&Archive=Zenith701801 Text Version: http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 13-03-20&Archive=Zenith701801 =============================================== EMail Version of Today's List Digest Archive =============================================== ---------------------------------------------------------- Zenith701801-List Digest Archive --- Total Messages Posted Wed 03/20/13: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:45 AM - Re: Zenith701 with A65 (cffd@pgrb.com) 2. 09:00 AM - Re: Re: Zenith701 with A65 (Ronnie Wehba) 3. 09:50 AM - Of Rudder Pedals and Brakes (Philip Smith) 4. 02:56 PM - Re: Of Rudder Pedals and Brakes (sonar1@cox.net) 5. 04:30 PM - Re: Of Rudder Pedals and Brakes (MacDonald Doug) ________________________________ Message 1 _____________________________________ Time: 07:45:47 AM PST US From: cffd@pgrb.com Subject: Zenith701801-List: Re: Zenith701 with A65 Hi Dave, I have a Jab 2200 at about 140 pounds in my 701 for a dry weight of 570#. My 701 is very simple and before the SP version.- Getting a dry weight of 600# with longer wings (not much weight there) and an A80 may be hard. Chuck D. N701TX ________________________________ Message 2 _____________________________________ Time: 09:00:16 AM PST US Subject: Re: Zenith701801-List: Re: Zenith701 with A65 From: Ronnie Wehba anyone around san antonio tx have a701 will be there middle next month like t to look at one Sent from my iPhone On Mar 20, 2013, at 9:45 AM, cffd@pgrb.com wrote: > Hi Dave, > > I have a Jab 2200 at about 140 pounds in my 701 for a dry weight of 570#. > M y 701 is very simple and before the SP version. Getting a dry weight of 600 # with longer wings (not much weight there) and an A80 may be hard. > > Chuck D. N701TX > > ========================= ======== ========================= ======== ========================= ======== ========================= ======== > ________________________________ Message 3 _____________________________________ Time: 09:50:12 AM PST US Subject: Zenith701801-List: Of Rudder Pedals and Brakes From: Philip Smith Ok 701ers, Who has modified the rudder pedals so that your - read my - size 11 clod-hoppers don't interfere with the brakes when taking off or touching down. Its not a non starter, but I find that it is very easy to get a "little" brake action while moving the pedals on takeoff and after landing if I am not super careful. Basically, I have to consciously move the heels of my shoes back so that only my tippy toes are on the rudder pedal bars. This works better in the summer while wearing tennies but suffers in the winter while wearing boots. Thought about adjusting the brake part of the pedal arm fwd a little by adjusting the clevis on the brake cylinder but not sure that this is do-able. Right now my geometry is brake pedal aligned with the rudder pedal ie straight up and down. Also thought about making some sort of piece that would go on the "rudder bar" part of the pedal to act as a spacer but this would shorten up an already short leg room dimension. Don't want to get into a major rebuild here just tossing it out for your astute suggestions or a link to a previous discussion. ttfn Still grinnin!! Phil Smith Buhl ID CH 701 Rotax ULS ________________________________ Message 4 _____________________________________ Time: 02:56:04 PM PST US Subject: Zenith701801-List: Re: Of Rudder Pedals and Brakes From: "sonar1@cox.net" Hi Phil, I had the same problem, and I solved it by changing my shoes. I got some "sock slippers" from LL Bean, and now can feel the rudder pedals and the brake with no problem. They are wool socks with thin leather soles. I wear them all the time now..........Fred Sanford....701 912ul flying since 2005 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=396687#396687 ________________________________ Message 5 _____________________________________ Time: 04:30:32 PM PST US From: MacDonald Doug Subject: Re: Zenith701801-List: Of Rudder Pedals and Brakes Phil, when I set up my brakes I had to run the clevis on the top of the bra ke cyl down a fair bit to get comfortable geometry.- I then had to buzz t he end of the threaded shaft off so there was no interference between the t hreaded shaft and the mounting bolt.- Seem to remember it was fairly easy .- I have size 10.5 feet and almost always wear steel toe safety boots an d have no issues with bumping the brakes.=0A-=0AHope this is helpful=0A -=0ADoug M=0ANW Ontario, Canada=0ACH-701 from scratch.=0A =0A=0A_________ _______________________=0A From: Philip Smith =0ATo: zenith701801-list@matronics.com =0ASent: Wednesday, March 20, 2013 11:49:54 AM=0ASubject: Zenith701801-List: Of Rudder Pedals and Brakes=0A =0A=0AOk 701ers,=0AWho has modified the rudder pedals so that your - read my - size 11 clod-hoppers don't interfere with the brakes when taking off or touching down.=0AIts not a non starter, but I find that it is very easy to get a "l ittle" brake action while moving the pedals on takeoff and after landing if I am not super-careful. Basically, I have to-consciously-move the he els of my shoes back so that only my tippy toes are on the rudder pedal bar s. This works better in the summer while wearing tennies but suffers in the winter while wearing boots. =0AThought about adjusting the brake part of t he pedal arm fwd a little by adjusting the clevis on the brake-cylinder -but not sure that this is do-able. Right now my geometry is brake pedal aligned with the rudder pedal ie straight up and down. =0AAlso thought abou t making some sort of piece that would go on the "rudder bar" part of the p edal to act as a spacer but this would shorten up an already short leg room dimension.=0ADon't want to get into a major rebuild here just tossing it o ut for your astute suggestions or a link to a previous discussion.-=0Attf ============ ________________________________ Message 4 _____________________________________ Time: 04:54:44 PM PST US From: "David L. Orr" Subject: Re: Zenith701801-List: Re: Zenith701801-List Digest: 5 Msgs - 03/20/13 Harry Fenton has a lot of good information on the small continental engines, here is the link. http://www.bowersflybaby.com/tech/fenton.htm -----Original Message----- >From: AJR >Sent: Mar 21, 2013 4:22 PM >To: zenith701801-list@matronics.com >Subject: Zenith701801-List: Re: Zenith701801-List Digest: 5 Msgs - 03/20/13 > > >Hi Guys >anyone know of information or a kit to install a starter on >an A65 continental..My friend has the A65 on his >701 and has to hand crank it to get it going..Makes >it a little difficult if it stops in flight..Also he is looking >for a used set of bubble doors for the same unit. >Any information would be appreciated >Alvin Rose > >-----Original Message----- >From: Zenith701801-List Digest Server >Sent: Thursday, March 21, 2013 4:30 AM >To: Zenith701801-List Digest List >Subject: Zenith701801-List Digest: 5 Msgs - 03/20/13 > >* > >================================================= > Online Versions of Today's List Digest Archive >================================================= > >Today's complete Zenith701801-List Digest can also be found in either of the >two Web Links listed below. The .html file includes the Digest formatted >in HTML for viewing with a web browser and features Hyperlinked Indexes >and Message Navigation. The .txt file includes the plain ASCII version >of the Zenith701801-List Digest and can be viewed with a generic text editor >such as Notepad or with a web browser. > >HTML Version: > > http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 13-03-20&Archive=Zenith701801 > >Text Version: > > http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 13-03-20&Archive=Zenith701801 > > >=============================================== > EMail Version of Today's List Digest Archive >=============================================== > > > ---------------------------------------------------------- > Zenith701801-List Digest Archive > --- > Total Messages Posted Wed 03/20/13: 5 > ---------------------------------------------------------- > > >Today's Message Index: >---------------------- > > 1. 07:45 AM - Re: Zenith701 with A65 (cffd@pgrb.com) > 2. 09:00 AM - Re: Re: Zenith701 with A65 (Ronnie Wehba) > 3. 09:50 AM - Of Rudder Pedals and Brakes (Philip Smith) > 4. 02:56 PM - Re: Of Rudder Pedals and Brakes (sonar1@cox.net) > 5. 04:30 PM - Re: Of Rudder Pedals and Brakes (MacDonald Doug) > > >________________________________ Message 1 >_____________________________________ > > >Time: 07:45:47 AM PST US >From: cffd@pgrb.com >Subject: Zenith701801-List: Re: Zenith701 with A65 > > > Hi Dave, > > I have a Jab 2200 at about 140 pounds in my 701 for a dry weight of >570#. My 701 is very simple and before the SP version.- Getting a dry >weight of 600# with longer wings (not much weight there) and an A80 >may be hard. > > Chuck D. N701TX > > >________________________________ Message 2 >_____________________________________ > > >Time: 09:00:16 AM PST US >Subject: Re: Zenith701801-List: Re: Zenith701 with A65 >From: Ronnie Wehba > >anyone around san antonio tx have a701 will be there middle next month like >t >to look at one > >Sent from my iPhone > >On Mar 20, 2013, at 9:45 AM, cffd@pgrb.com wrote: > >> Hi Dave, >> >> I have a Jab 2200 at about 140 pounds in my 701 for a dry weight of 570#. >> M >y 701 is very simple and before the SP version. Getting a dry weight of 600 ># with longer wings (not much weight there) and an A80 may be hard. >> >> Chuck D. N701TX >> >> >> >========================= >======== >========================= >======== >========================= >======== >========================= >======== >> > >________________________________ Message 3 >_____________________________________ > > >Time: 09:50:12 AM PST US >Subject: Zenith701801-List: Of Rudder Pedals and Brakes >From: Philip Smith > >Ok 701ers, > >Who has modified the rudder pedals so that your - read my - size 11 >clod-hoppers don't interfere with the brakes when taking off or touching >down. > >Its not a non starter, but I find that it is very easy to get a "little" >brake action while moving the pedals on takeoff and after landing if I am >not super careful. Basically, I have to consciously move the heels of my >shoes back so that only my tippy toes are on the rudder pedal bars. This >works better in the summer while wearing tennies but suffers in the winter >while wearing boots. > >Thought about adjusting the brake part of the pedal arm fwd a little by >adjusting the clevis on the brake cylinder but not sure that this is >do-able. Right now my geometry is brake pedal aligned with the rudder pedal >ie straight up and down. > >Also thought about making some sort of piece that would go on the "rudder >bar" part of the pedal to act as a spacer but this would shorten up an >already short leg room dimension. > >Don't want to get into a major rebuild here just tossing it out for your >astute suggestions or a link to a previous discussion. > >ttfn > >Still grinnin!! > >Phil Smith > >Buhl ID > >CH 701 Rotax ULS > >________________________________ Message 4 >_____________________________________ > > >Time: 02:56:04 PM PST US >Subject: Zenith701801-List: Re: Of Rudder Pedals and Brakes >From: "sonar1@cox.net" > > >Hi Phil, >I had the same problem, and I solved it by changing my shoes. I got some >"sock >slippers" from LL Bean, and now can feel the rudder pedals and the brake >with >no problem. >They are wool socks with thin leather soles. I wear them all the time >now..........Fred >Sanford....701 912ul flying since 2005 > > >Read this topic online here: > >http://forums.matronics.com/viewtopic.php?p=396687#396687 > > >________________________________ Message 5 >_____________________________________ > > >Time: 04:30:32 PM PST US >From: MacDonald Doug >Subject: Re: Zenith701801-List: Of Rudder Pedals and Brakes > >Phil, when I set up my brakes I had to run the clevis on the top of the bra >ke cyl down a fair bit to get comfortable geometry.- I then had to buzz t >he end of the threaded shaft off so there was no interference between the t >hreaded shaft and the mounting bolt.- Seem to remember it was fairly easy >.- I have size 10.5 feet and almost always wear steel toe safety boots an >d have no issues with bumping the brakes.=0A-=0AHope this is helpful=0A >-=0ADoug M=0ANW Ontario, Canada=0ACH-701 from scratch.=0A =0A=0A_________ >_______________________=0A From: Philip Smith =0ATo: >zenith701801-list@matronics.com =0ASent: Wednesday, March 20, 2013 11:49:54 >AM=0ASubject: Zenith701801-List: Of Rudder Pedals and Brakes=0A =0A=0AOk >701ers,=0AWho has modified the rudder pedals so that your - read my - size >11 clod-hoppers don't interfere with the brakes when taking off or touching >down.=0AIts not a non starter, but I find that it is very easy to get a "l >ittle" brake action while moving the pedals on takeoff and after landing if >I am not super-careful. Basically, I have to-consciously-move the he >els of my shoes back so that only my tippy toes are on the rudder pedal bar >s. This works better in the summer while wearing tennies but suffers in the >winter while wearing boots. =0AThought about adjusting the brake part of t >he pedal arm fwd a little by adjusting the clevis on the brake-cylinder >-but not sure that this is do-able. Right now my geometry is brake pedal >aligned with the rudder pedal ie straight up and down. =0AAlso thought abou >t making some sort of piece that would go on the "rudder bar" part of the p >edal to act as a spacer but this would shorten up an already short leg room >dimension.=0ADon't want to get into a major rebuild here just tossing it o >ut for your astute suggestions or a link to a previous discussion.-=0Attf >============ > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message zenith701801-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Zenith701801-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/zenith701801-list Browse Digests http://www.matronics.com/digest/zenith701801-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.