---------------------------------------------------------- Zenith701801-List Digest Archive --- Total Messages Posted Sun 06/09/13: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 09:54 PM - Deburring ribs, spar, channels and wing skins RW (Perry Delano) ________________________________ Message 1 _____________________________________ Time: 09:54:23 PM PST US From: "Perry Delano" Subject: Zenith701801-List: Deburring ribs, spar, channels and wing skins RW Hi all, Is there a rule of thumb for deburring on a CH-701. Is a vixen file the best, flat file or should one go lightly with a countersink bit or large drill bit. Is it enough to do under the factory head and between mating surfaces or does one have to remove the burrs from every side, even where the shop head of the rivet will contact. The building standards say to ensure not to counter sink holes and a flat file may pull material into the hole but I don't believe it describes how best to do this work. I have done all the drilling on the upper and lower wing skins for the right wing and started deburring when I thought, I'd better see what others on the list have done. Regards, Perry ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message zenith701801-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Zenith701801-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/zenith701801-list Browse Digests http://www.matronics.com/digest/zenith701801-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.