----------------------------------------------------------
                           Zenith701801-List Digest Archive
                                      ---
                     Total Messages Posted Thu 06/13/13: 1
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 07:14 AM - Re: Deburring ribs, spar, channels and wing skins RW  (Perry Delano)
 
 
 
________________________________  Message 1  _____________________________________


Time: 07:14:43 AM PST US
From: "Perry Delano" <pdelano@telus.net>
Subject: RE: Zenith701801-List: Deburring ribs, spar, channels and wing skins RW

Hi all,


Thanks for the advice on deburring. I took the 12=9D vixen file I 
had from Lee Valley and cut 4=9D of it. I found this was a bit 
long to get between crimps, so off the 8=9D left I cut another 
2=9D chunk to get between crimps. The 2=9D is handy as it 
does not hit too many holes at once allowing one to do a couple holes at 
a time. The longer ones work better on the spar and longer runs where 
one can have a good grip on the file. Now I have a 2=9D, 
4=9D and 6=9D vixen file. I used the combination to deburr 
the lower right wing skeleton. It works well, but as one of the 
poster=99s said, I need to round off the edges so it does not 
create scratches on the skins. I will do that before deburring the lower 
skin and nose skin.

Thanks again,

Regards,

Perry

 

-------------------------------------------------------------------------------------
                       Other Matronics Email List Services
-------------------------------------------------------------------------------------
Post A New Message               zenith701801-list@matronics.com
UN/SUBSCRIBE                     http://www.matronics.com/subscription
List FAQ                         http://www.matronics.com/FAQ/Zenith701801-List.htm
Web Forum Interface To Lists     http://forums.matronics.com
Matronics List Wiki              http://wiki.matronics.com
Full Archive Search Engine       http://www.matronics.com/search
7-Day List Browse                http://www.matronics.com/browse/zenith701801-list
Browse Digests                   http://www.matronics.com/digest/zenith701801-list
Browse Other Lists               http://www.matronics.com/browse
Live Online Chat!                http://www.matronics.com/chat
Archive Downloading              http://www.matronics.com/archives
Photo Share                      http://www.matronics.com/photoshare
Other Email Lists                http://www.matronics.com/emaillists
Contributions                    http://www.matronics.com/contribution
-------------------------------------------------------------------------------------

These Email List Services are sponsored solely by Matronics and through the 
generous Contributions of its members.