----------------------------------------------------------
                           Zenith701801-List Digest Archive
                                      ---
                     Total Messages Posted Wed 07/10/13: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 06:29 PM - gas cap vent  (sam hord)
     2. 06:52 PM - Re: gas cap vent  (MacDonald Doug)
     3. 10:46 PM - Re: gas cap vent  (Vance Simons)
 
 
 
________________________________  Message 1  _____________________________________


Time: 06:29:05 PM PST US
Subject: Zenith701801-List: gas cap vent
From: sam hord <samhord2@gmail.com>

Is it necessary to add a vent tube to the gas cap on the 701, or is the
vented caps enough? I have shut off valves for both tanks.

________________________________  Message 2  _____________________________________


Time: 06:52:15 PM PST US
From: MacDonald Doug <dougsnash@yahoo.com>
Subject: Re: Zenith701801-List: gas cap vent

It depends who you talk to.- Personally, I am perfectly satisfied with th
e factory caps with no modification.- I am, however, running 3/8 hard pip
ed fuel line with AN fittings as opposed to the rubber hose that comes with
 the kits.=0A-=0ADoug M=0ACH-701 from scratch (mostly)=0ANW Ontario, Cana
da=0A =0A=0A________________________________=0A From: sam hord <samhord2@gm
ail.com>=0ATo: zenith list <zenith701801-list@matronics.com> =0ASent: Wedne
sday, July 10, 2013 8:28:45 PM=0ASubject: Zenith701801-List: gas cap vent
=0A  =0A=0A=0AIs it necessary to add a vent tube to the gas cap on the 701,
 or is the vented caps enough? I have shut off valves for both tanks.

________________________________  Message 3  _____________________________________


Time: 10:46:53 PM PST US
Subject: Re: Zenith701801-List: gas cap vent
From: Vance Simons <vancesimons@gmail.com>

Good to see you only here Sam. I'm still plugging away on my 701. Are you
about ready to fly yours yet?

Vance.
On Jul 10, 2013 6:30 PM, "sam hord" <samhord2@gmail.com> wrote:

> Is it necessary to add a vent tube to the gas cap on the 701, or is the
> vented caps enough? I have shut off valves for both tanks.
>
> *
>
> *
>
>

 

-------------------------------------------------------------------------------------
                       Other Matronics Email List Services
-------------------------------------------------------------------------------------
Post A New Message               zenith701801-list@matronics.com
UN/SUBSCRIBE                     http://www.matronics.com/subscription
List FAQ                         http://www.matronics.com/FAQ/Zenith701801-List.htm
Web Forum Interface To Lists     http://forums.matronics.com
Matronics List Wiki              http://wiki.matronics.com
Full Archive Search Engine       http://www.matronics.com/search
7-Day List Browse                http://www.matronics.com/browse/zenith701801-list
Browse Digests                   http://www.matronics.com/digest/zenith701801-list
Browse Other Lists               http://www.matronics.com/browse
Live Online Chat!                http://www.matronics.com/chat
Archive Downloading              http://www.matronics.com/archives
Photo Share                      http://www.matronics.com/photoshare
Other Email Lists                http://www.matronics.com/emaillists
Contributions                    http://www.matronics.com/contribution
-------------------------------------------------------------------------------------

These Email List Services are sponsored solely by Matronics and through the 
generous Contributions of its members.