Zenith701801-List Digest Archive

Mon 11/04/13


Total Messages Posted: 5



Today's Message Index:
----------------------
 
     0. 12:08 AM - Please Make A Contribution To Support Your Lists (Matt Dralle)
     1. 08:35 AM - Rivet Squeeze and #40 blind hole locator (Perry Delano)
     2. 10:00 AM - Re: Rivet Squeeze and #40 blind hole locator (MacDonald Doug)
     3. 12:23 PM - Re: Rivet Squeeze and #40 blind hole locator (pdelano@telus.net)
     4. 12:32 PM - Re: Rivet Squeeze and #40 blind hole locator (MacDonald Doug)
 
 
 


Message 0



  • 				PREVIOUS
    		•  Skip to PREVIOUS Message
    

  • 					NEXT
    		•  Skip to NEXT Message
    

  • 	LIST
    		•  Reply to LIST Regarding this Message
    

  • 		SENDER
    		•  Reply to SENDER Regarding this Message
    

    
      
      

    Time: 12:08:54 AM PST US
    From: Matt Dralle <dralle@matronics.com>
    Subject: Please Make A Contribution To Support Your Lists
          
      
      Dear Listers,
      
      There is no advertising income to support the Matronics Email Lists and Forums.
      The operation is supported 100% by your personal Contributions during the November
      Fund Raiser.
      
      Please make your Contribution today to support the continued operation and upgrade
      of these services.  You can pick up a really nice gift for making your Contribution
      too!
      
      You may use a Credit Card or Paypal at the Matronics Contribution Site here:
      
              http://www.matronics.com/contribution
      
      or, you can send a personal check to the following address:
      
              Matronics / Matt Dralle
              581 Jeannie Way 
              Livermore, CA 94550
      
      Thank you in advance for your generous support!
      
      Matt Dralle
      Matronics Email List and Forum Administrator
      
      


    Message 1

    

  • 					INDEX
    		•  Back to Main INDEX
    

  • 					NEXT
    		•  Skip to NEXT Message
    

  • 	LIST
    		•  Reply to LIST Regarding this Message
    

  • 		SENDER
    		•  Reply to SENDER Regarding this Message
    

    
      
      

    Time: 08:35:26 AM PST US
    From: "Perry Delano" <pdelano@telus.net>
    Subject: Rivet Squeeze and #40 blind hole locator
          
      Hi all,
      
      
      Is it necessary to invest in a rivet squeezer and blind hole locator or do
      the DIY pliers and #40 hole finder (strap duplicator) work fine for the
      whole project? I will need them soon for trailing edge solid rivets and wing
      root skin.
      
      
      Regards,
      
      
      Perry
      
      


    Message 2

    

  • 					INDEX
    		•  Back to Main INDEX
    

  • 				PREVIOUS
    		•  Skip to PREVIOUS Message
    

  • 					NEXT
    		•  Skip to NEXT Message
    

  • 	LIST
    		•  Reply to LIST Regarding this Message
    

  • 		SENDER
    		•  Reply to SENDER Regarding this Message
    

    
      
      

    Time: 10:00:33 AM PST US
    From: MacDonald Doug <dougsnash@yahoo.com>
    Subject: Re: Rivet Squeeze and #40 blind hole locator
          
      Perry, I picked up an economical rivet squeezer from one of the aviation to
      ol supply houses(Avery I think) for a fairly reasonable price.- It may wo
      rk to squeeze the soft trailing edge rivets with modified pliers but for th
      e cost, the proper tool worked so easy it was well worth the price.=0A=0AI 
      think this is the squeezer I ended up using.=0A=0Ahttp://www.averytools.com
      /prodinfo.asp?number=64015=0A=0ADoug M=0ACH-701 from scratch=0ANW Ontario
      , Canada=0A=0A=0A=0A=0A=0AOn Monday, November 4, 2013 10:43:10 AM, Perry De
      lano <pdelano@telus.net> wrote:=0A =0AHi all,=0A-=0AIs it necessary to in
      vest in a rivet squeezer and blind hole locator or do the DIY pliers and #4
      0 hole finder (strap duplicator) work fine for the whole project? I will ne
      ed them soon for trailing edge solid rivets and wing root skin.=0A-=0AReg
      


    Message 3

    

  • 					INDEX
    		•  Back to Main INDEX
    

  • 				PREVIOUS
    		•  Skip to PREVIOUS Message
    

  • 					NEXT
    		•  Skip to NEXT Message
    

  • 	LIST
    		•  Reply to LIST Regarding this Message
    

  • 		SENDER
    		•  Reply to SENDER Regarding this Message
    

    
      
      

    Time: 12:23:21 PM PST US
    Subject: Re: Rivet Squeeze and #40 blind hole locator
    From: pdelano@telus.net
          
      SGkgRG91ZywNCg0KRG8geW91IGhhdmUgb3JkZXIgaW5zZXJ0cyB3aXRoIHRoZSBzcXVlZXplciwg
      b3IgaXMgdGhlIGJhcmUgdG9vbCBhbGwgeW91IG5lZWQuDQoNClJlZ2FyZHMsDQoNClBlcnJ5DQpT
      ZW50IHdpcmVsZXNzbHkgZnJvbSBteSBCbGFja0JlcnJ5IGRldmljZSBvbiB0aGUgQmVsbCBuZXR3
      b3JrLg0KRW52b3npIHNhbnMgZmlsIHBhciBtb24gdGVybWluYWwgbW9iaWxlIEJsYWNrQmVycnkg
      c3VyIGxlIHLpc2VhdSBkZSBCZWxsLg0KDQotLS0tLU9yaWdpbmFsIE1lc3NhZ2UtLS0tLQ0KRnJv
      bTogTWFjRG9uYWxkIERvdWcgPGRvdWdzbmFzaEB5YWhvby5jb20+DQpTZW5kZXI6IG93bmVyLXpl
      bml0aDcwMTgwMS1saXN0LXNlcnZlckBtYXRyb25pY3MuY29tDQpEYXRlOiBNb24sIDQgTm92IDIw
      MTMgMTA6MDA6MDQgDQpUbzogemVuaXRoNzAxODAxLWxpc3RAbWF0cm9uaWNzLmNvbTx6ZW5pdGg3
      MDE4MDEtbGlzdEBtYXRyb25pY3MuY29tPg0KUmVwbHktVG86IHplbml0aDcwMTgwMS1saXN0QG1h
      dHJvbmljcy5jb21TdWJqZWN0OiBSZTogWmVuaXRoNzAxODAxLUxpc3Q6IFJpdmV0IFNxdWVlemUg
      YW5kICM0MCBibGluZCBob2xlIGxvY2F0b3INCg0KUGVycnksIEkgcGlja2VkIHVwIGFuIGVjb25v
      bWljYWwgcml2ZXQgc3F1ZWV6ZXIgZnJvbSBvbmUgb2YgdGhlIGF2aWF0aW9uIHRvb2wgc3VwcGx5
      IGhvdXNlcyhBdmVyeSBJIHRoaW5rKSBmb3IgYSBmYWlybHkgcmVhc29uYWJsZSBwcmljZS6gIEl0
      IG1heSB3b3JrIHRvIHNxdWVlemUgdGhlIHNvZnQgdHJhaWxpbmcgZWRnZSByaXZldHMgd2l0aCBt
      b2RpZmllZCBwbGllcnMgYnV0IGZvciB0aGUgY29zdCwgdGhlIHByb3BlciB0b29sIHdvcmtlZCBz
      byBlYXN5IGl0IHdhcyB3ZWxsIHdvcnRoIHRoZSBwcmljZS4KCkkgdGhpbmsgdGhpcyBpcyB0aGUg
      c3F1ZWV6ZXIgSSBlbmRlZCB1cCB1c2luZy4KCmh0dHA6Ly93d3cuYXZlcnl0b29scy5jb20vcHJv
      ZGluZm8uYXNwP251bWJlcj02NDAxNQoKRG91ZyBNCkNILTcwMSBmcm9tIHNjcmF0Y2gKTlcgT250
      YXJpbywgQ2FuYWRhCgoKCgoKT24gTW9uZGF5LCBOb3ZlbWJlciA0LCAyMDEzIDEwOjQzOjEwIEFN
      LCBQZXJyeSBEZWxhbm8gPHBkZWxhbm9AdGVsdXMubmV0PiB3cm90ZToKIApIaSBhbGwsCqAKSXMg
      aXQgbmVjZXNzYXJ5IHRvIGludmVzdCBpbiBhIHJpdmV0IHNxdWVlemVyIGFuZCBibGluZCBob2xl
      IGxvY2F0b3Igb3IgZG8gdGhlIERJWSBwbGllcnMgYW5kICM0MCBob2xlIGZpbmRlciAoc3RyYXAg
      ZHVwbGljYXRvcikgd29yayBmaW5lIGZvciB0aGUgd2hvbGUgcHJvamVjdD8gSSB3aWxsIG5lZWQg
      dGhlbSBzb29uIGZvciB0cmFpbGluZyBlZGdlIHNvbGlkIHJpdmV0cyBhbmQgd2luZyByb290IHNr
      aW4uCqAKUmVnDQo
      


    Message 4

    

  • 					INDEX
    		•  Back to Main INDEX
    

  • 				PREVIOUS
    		•  Skip to PREVIOUS Message
    

  • 					NEXT
    		•  Skip to NEXT Message
    

  • 	LIST
    		•  Reply to LIST Regarding this Message
    

  • 		SENDER
    		•  Reply to SENDER Regarding this Message
    

    
      
      

    Time: 12:32:48 PM PST US
    From: MacDonald Doug <dougsnash@yahoo.com>
    Subject: Re: Rivet Squeeze and #40 blind hole locator
          
      You'll need inserts too.=0A=0ADoug M=0A=0A=0A=0AOn Monday, November 4, 2013
       2:31:25 PM, "pdelano@telus.net" <pdelano@telus.net> wrote:=0A  =0AHi Doug,
      =0A=0ADo you have order inserts with the squeezer, or is the bare tool all 
      you need.=0A=0ARegards,=0A=0APerry=0ASent wirelessly from my BlackBerry dev
      ice on the Bell network.=0AEnvoy=E9 sans fil par mon terminal mobile BlackB
      erry sur le r=E9seau de Bell.=0A=0A________________________________=0A=0AFr
      om:  MacDonald Doug <dougsnash@yahoo.com> =0ASender:  owner-zenith701801-li
      st-server@matronics.com =0ADate: Mon, 4 Nov 2013 10:00:04 -0800 (PST)=0ATo:
       zenith701801-list@matronics.com<zenith701801-list@matronics.com>=0AReplyTo
      :  zenith701801-list@matronics.com=0ASubject: Re: Zenith701801-List: Rivet 
      Squeeze and #40 blind hole locator=0A=0APerry, I picked up an economical ri
      vet squeezer from one of t==0Ahe aviation tool supply houses(Avery I thin
      k) for a fairly reasonable price==0A.- It may work to squeeze the soft 
      trailing edge rivets with modified ==0Apliers but for the cost, the prope
      r tool worked so easy it was well worth t==0Ahe price.=0A=0AI think this 
      is the squeezer I ended up using.=0A=0Ahttp==0A://www.averytools.com/prod
      info.asp?number=3D64015=0A=0ADoug M=0ACH-701 f==0Arom scratch=0ANW Onta
      rio, Canada=0A=0A=0A=0A=0A=0A<==0Adiv dir=3D"ltr"> On Monday, November 
      4, 2013 ==0A10:43:10 AM, Perry Delano <pdelano@telus.net> wrote:=0A =0AHi
       all,=0A-=0AIs it necessary to invest in a rivet squeezer and blind hole 
      loc==0Aator or do the DIY pliers and #40 hole finder (strap duplicator) w
      ork fine ==0Afor the whole project? I will need them soon for trailing ed
      ge solid rivets= and wing root skin.=0A- =0ARegards,=0A-=0APerry</=
      =0Adiv>=0A=0A=0A=0Awww.mypil= target=3D"_blank" href=3D"http://ww
      w.matronics.com/contribution">http://ww==0Aw" target=3D"_blank" href=
      3D"http://www.matronics.com/Navigator?Zenith70180==0A=3D=3D=3D=3D
      =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
      =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
      =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
      =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
      =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
      =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
      =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
      =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
      =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D  
      

    

    


    

    

    

    

    Other Matronics Email List Services
    

    

    

    


  • Post A New Message
    		•   zenith701801-list@matronics.com
    

  • UN/SUBSCRIBE
    		•   http://www.matronics.com/subscription
    

  • List FAQ
    		•   http://www.matronics.com/FAQ/Zenith701801-List.htm
    

  • Web Forum Interface To Lists
    		•   http://forums.matronics.com
    

  • Matronics List Wiki
    		•   http://wiki.matronics.com
    

  • 7-Day List Browse
    		•   http://www.matronics.com/browse/zenith701801-list
    

  • Browse Zenith701801-List Digests
    		•   http://www.matronics.com/digest/zenith701801-list
    

  • Browse Other Lists
    		•   http://www.matronics.com/browse
    

  • Live Online Chat!
    		•   http://www.matronics.com/chat
    

  • Archive Downloading
    		•   http://www.matronics.com/archives
    

  • Photo Share
    		•   http://www.matronics.com/photoshare
    

  • Other Email Lists
    		•   http://www.matronics.com/emaillists
    

  • Contributions
    		•   http://www.matronics.com/contribution
    



    

    


    

    


    
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.


    

    

-- Please support this service by making your Contribution today! --