Today's Message Index:
----------------------
1. 06:37 AM - Re: Zenith701801-List Digest: 0 Msgs - 05/06/15 (Tkwhittus)
2. 06:51 AM - Re: Zenith701801-List Digest: 3 Msgs - 05/07/15 (Charles Deiterich)
3. 07:58 AM - Re: Re: Zenith701801-List Digest: 3 Msgs - 05/07/15 (Perry Delano)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Zenith701801-List Digest: 0 Msgs - 05/06/15 |
Please unsubscribe!
Sent from my iPad
> On May 7, 2015, at 9:01 AM, Zenith701801-List Digest Server <zenith701801-list@matronics.com>
wrote:
>
> *
>
> =================================================
> Online Versions of Today's List Digest Archive
> =================================================
>
> Today's complete Zenith701801-List Digest can also be found in either of the
> two Web Links listed below. The .html file includes the Digest formatted
> in HTML for viewing with a web browser and features Hyperlinked Indexes
> and Message Navigation. The .txt file includes the plain ASCII version
> of the Zenith701801-List Digest and can be viewed with a generic text editor
> such as Notepad or with a web browser.
>
> HTML Version:
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 15-05-06&Archive=Zenith701801
>
> Text Version:
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 15-05-06&Archive=Zenith701801
>
>
> ===============================================
> EMail Version of Today's List Digest Archive
> ===============================================
>
>
> ----------------------------------------------------------
> Zenith701801-List Digest Archive
> ---
> Total Messages Posted Wed 05/06/15: 0
> ----------------------------------------------------------
>
>
> Today's Message Index:
> ----------------------
>
>
>
>
>
>
>
>
>
>
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Zenith701801-List Digest: 3 Msgs - 05/07/15 |
I added .016 L's I made with a small brake to the sides. I should have adde
d one on the bottom just behind the large inspection hole.Chuck D.M701TX
From: Zenith701801-List Digest Server <zenith701801-list@matronics.co
m>
To: Zenith701801-List Digest List <zenith701801-list-digest@matronics.com>
Sent: Friday, May 8, 2015 2:02 AM
Subject: Zenith701801-List Digest: 3 Msgs - 05/07/15
*
========================
=C2- Online Versions of Today's List Digest Archive
========================
Today's complete Zenith701801-List Digest can also be found in either of th
e
two Web Links listed below.=C2- The .html file includes the Digest format
ted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation.=C2- The .txt file includes the plain ASCII versio
n
of the Zenith701801-List Digest and can be viewed with a generic text edito
r
such as Notepad or with a web browser.
HTML Version:
=C2- =C2- http://www.matronics.com/digest/digestview.php?Style=82701&
View=html&Chapter 15-05-07&Archive=Zenith701801
Text Version:
=C2- =C2- http://www.matronics.com/digest/digestview.php?Style=82701&
View=txt&Chapter 15-05-07&Archive=Zenith701801
========================
=======================
=C2- EMail Version of Today's List Digest Archive
========================
=======================
=C2- =C2- =C2- =C2- =C2- ----------------------------------------
------------------
=C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2
- =C2- =C2- Zenith701801-List Digest Archive
=C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2
- =C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2- ---
=C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2- Total
Messages Posted Thu 05/07/15: 3
=C2- =C2- =C2- =C2- =C2- ----------------------------------------
------------------
Today's Message Index:
----------------------
=C2- =C2- 1. 09:29 AM - Diagonal Stiffeners for Fuselage=C2- (Perry D
elano)
=C2- =C2- 2. 03:08 PM - Re: Diagonal Stiffeners for Fuselage=C2- (Dou
g MacDonald)
=C2- =C2- 3. 04:00 PM - Re: Diagonal Stiffeners for Fuselage=C2- (Per
ry Delano)
________________________________=C2- Message 1=C2- ____________________
_________________
Time: 09:29:54 AM PST US
From: "Perry Delano" <pdelano@telus.net>
Subject: Zenith701801-List: Diagonal Stiffeners for Fuselage
Hi,
I just ordered the fuselage, flaperons and slats kit for the 701 from
Zenith. I think I would like to add the diagonal "L" angle stiffening piece
s
to the fuselage bottom, top and sides as some builders have done.
Are they a good idea? I would appreciate any comments.
If they are, does anybody know how many lengths of L angle are required.
Regards,
Perry
________________________________=C2- Message 2=C2- ____________________
_________________
Time: 03:08:34 PM PST US
Subject: Re: Zenith701801-List: Diagonal Stiffeners for Fuselage
From: Doug MacDonald <dougsnash@yahoo.com>
Perry, I have diagonal stiffeners in my 701 and they help but I still get s
o
me rattle in certain fligh conditions.=C2- It is telling that the diagona
ls are
stock on the 750 so if I were building a 701 again I would not hesitate to
p
ut them in.=C2- As for how many to order, I don't remember but essentiall
y one f
or every bay.=C2- I would seriously consider adding a second diagonal for
a "X"
in the large flat side panels immediately behind the baggage wall as I thi
n
k one diagonal still leaves too much unsupported 016 drum skin and is likel
y
the source of the slight rattle I have left when flying uncoordinated.
Hope this information helps
Doug M
Sent from my iPad
> On May 7, 2015, at 11:29, Perry Delano <pdelano@telus.net> wrote:
>
> Hi,
>=C2-
> I just ordered the fuselage, flaperons and slats kit for the 701 from Zen
i
th. I think I would like to add the diagonal =9CL=9D angle stiff
ening pieces to the fuselage bottom, top and sides as some builders have do
n
e.
> Are they a good idea? I would appreciate any comments.
> If they are, does anybody know how many lengths of L angle are required.
>=C2-
> Regards,
>=C2-
> Perry
>
>
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
>
________________________________=C2- Message 3=C2- ____________________
_________________
Time: 04:00:40 PM PST US
From: "Perry Delano" <pdelano@telus.net>
Subject: RE: Zenith701801-List: Diagonal Stiffeners for Fuselage
HI Doug,
Thanks. I asked Zenith to add them to my order. Won=99t say who,
but someone estimated 11 lengths were required,=C2- and I have a couple
extra lying around. I will definetly go for the =9CX=9D.
Regards,
Perry
From: owner-zenith701801-list-server@matronics.com
[mailto:owner-zenith701801-list-server@matronics.com] On Behalf Of Doug
MacDonald
Sent: Thursday, May 07, 2015 3:06 PM
Subject: Re: Zenith701801-List: Diagonal Stiffeners for Fuselage
Perry, I have diagonal stiffeners in my 701 and they help but I still
get some rattle in certain fligh conditions.=C2- It is telling that the
diagonals are stock on the 750 so if I were building a 701 again I would
not hesitate to put them in.=C2- As for how many to order, I don't rememb
er
but essentially one for every bay.=C2- I would seriously consider adding
a
second diagonal for a "X" in the large flat side panels immediately
behind the baggage wall as I think one diagonal still leaves too much
unsupported 016 drum skin and is likely the source of the slight rattle
I have left when flying uncoordinated.
Hope this information helps
Doug M
Sent from my iPad
On May 7, 2015, at 11:29, Perry Delano <pdelano@telus.net> wrote:
Hi,
I just ordered the fuselage, flaperons and slats kit for the 701 from
Zenith. I think I would like to add the diagonal =9CL=9D
angle stiffening pieces to the fuselage bottom, top and sides as some
builders have done.
Are they a good idea? I would appreciate any comments.
If they are, does anybody know how many lengths of L angle are required.
Regards,
Perry
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D
h701801-List"">http://www.matronics.com/Navigator?Zenith701801-List
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D
//forums.matronics.com
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D
ot;">http://www.matronics.com/contribution
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D
-
S -
-
=C2- =C2- =C2- =C2- =C2- -Matt Dralle, List Admin.
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Zenith701801-List Digest: 3 Msgs - 05/07/15 |
Thanks Chuck.
I will X it up. and thanks for the heads up on making your own L
brackets. I have enough scrap 016 to make my own to supplement those
ordered with the fuselage.
Regards,
Perry
From: owner-zenith701801-list-server@matronics.com
[mailto:owner-zenith701801-list-server@matronics.com] On Behalf Of
Charles Deiterich
Sent: Friday, May 08, 2015 6:51 AM
Subject: Zenith701801-List: Re: Zenith701801-List Digest: 3 Msgs -
05/07/15
I added .016 L's I made with a small brake to the sides. I should have
added one on the bottom just behind the large inspection hole.
Chuck D.
M701TX
_____
From: Zenith701801-List Digest Server <zenith701801-list@matronics.com>
<zenith701801-list-digest@matronics.com>
Sent: Friday, May 8, 2015 2:02 AM
Subject: Zenith701801-List Digest: 3 Msgs - 05/07/15
*
Online Versions of Today's List Digest Archive
Today's complete Zenith701801-List Digest can also be found in either of
the
two Web Links listed below. The .html file includes the Digest
formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the Zenith701801-List Digest and can be viewed with a generic text
editor
such as Notepad or with a web browser.
HTML Version:
http://www.matronics.com/digest/digestview.php?Style=82701
<http://www.matronics.com/digest/digestview.php?Style=82701&View=html
&Chapter 15-05-07&Archive=Zenith701801>
&View=html&Chapter 15-05-07&Archive=Zenith701801
Text Version:
http://www.matronics.com/digest/digestview.php?Style=82701
<http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&
Chapter 15-05-07&Archive=Zenith701801>
&View=txt&Chapter 15-05-07&Archive=Zenith701801
======================
EMail Version of Today's List Digest Archive
======================
----------------------------------------------------------
Zenith701801-List Digest Archive
---
Total Messages Posted Thu 05/07/15: 3
----------------------------------------------------------
Today's Message Index:
----------------------
1. 09:29 AM - Diagonal Stiffeners for Fuselage (Perry Delano)
2. 03:08 PM - Re: Diagonal Stiffeners for Fuselage (Doug MacDonald)
3. 04:00 PM - Re: Diagonal Stiffeners for Fuselage (Perry Delano)
________________________________ Message 1
_____________________________________
Time: 09:29:54 AM PST US
From: "Perry Delano" <pdelano@telus.net>
Subject: Zenith701801-List: Diagonal Stiffeners for Fuselage
Hi,
I just ordered the fuselage, flaperons and slats kit for the 701 from
Zenith. I think I would like to add the diagonal "L" angle stiffening
pieces
to the fuselage bottom, top and sides as some builders have done.
Are they a good idea? I would appreciate any comments.
If they are, does anybody know how many lengths of L angle are required.
Regards,
Perry
________________________________ Message 2
_____________________________________
Time: 03:08:34 PM PST US
Subject: Re: Zenith701801-List: Diagonal Stiffeners for Fuselage
From: Doug MacDonald <dougsnash@yahoo.com>
Perry, I have diagonal stiffeners in my 701 and they help but I still
get so
me rattle in certain fligh conditions. It is telling that the diagonals
are
stock on the 750 so if I were building a 701 again I would not hesitate
to p
ut them in. As for how many to order, I don't remember but essentially
one f
or every bay. I would seriously consider adding a second diagonal for a
"X"
in the large flat side panels immediately behind the baggage wall as I
thin
k one diagonal still leaves too much unsupported 016 drum skin and is
likely
the source of the slight rattle I have left when flying uncoordinated.
Hope this information helps
Doug M
Sent from my iPad
> On May 7, 2015, at 11:29, Perry Delano <pdelano@telus.net> wrote:
>
> Hi,
>
> I just ordered the fuselage, flaperons and slats kit for the 701 from
Zeni
th. I think I would like to add the diagonal =9CL=9D angle stiff
ening pieces to the fuselage bottom, top and sides as some builders have
don
e.
> Are they a good idea? I would appreciate any comments.
> If they are, does anybody know how many lengths of L angle are
required.
>
> Regards,
>
> Perry
>
>
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
>
________________________________ Message 3
_____________________________________
Time: 04:00:40 PM PST US
From: "Perry Delano" <pdelano@telus.net>
Subject: RE: Zenith701801-List: Diagonal Stiffeners for Fuselage
HI Doug,
Thanks. I asked Zenith to add them to my order. Won=99t say who,
but someone estimated 11 lengths were required, and I have a couple
extra lying around. I will definetly go for the =9CX=9D.
Regards,
Perry
From: owner-zenith701801-list-server@matronics.com
[mailto:owner-zenith701801-list-server@matronics.com] On Behalf Of Doug
MacDonald
Sent: Thursday, May 07, 2015 3:06 PM
Subject: Re: Zenith701801-List: Diagonal Stiffeners for Fuselage
Perry, I have diagonal stiffeners in my 701 and they help but I still
get some rattle in certain fligh conditions. It is telling that the
diagonals are stock on the 750 so if I were building a 701 again I would
not hesitate to put them in. As for how many to order, I don't remember
but essentially one for every bay. I would seriously consider adding a
second diagonal for a "X" in the large flat side panels immediately
behind the baggage wall as I think one diagonal still leaves too much
unsupported 016 drum skin and is likely the source of the slight rattle
I have left when flying uncoordinated.
Hope this information helps
Doug M
Sent from my iPad
On May 7, 2015, at 11:29, Perry Delano <pdelano@telus.net> wrote:
Hi,
I just ordered the fuselage, flaperons and slats kit for the 701 from
Zenith. I think I would like to add the diagonal =9CL=9D
angle stiffening pieces to the fuselage bottom, top and sides as some
builders have done.
Are they a good idea? I would appreciate any comments.
If they are, does anybody know how many lengths of L angle are required.
Regards,
Perry
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
h701801-List"">http://www.matronics.com/Navigator?Zenith701801-List
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
//forums.matronics.com
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
ot;">http://www.matronics.com/contribution
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3Dronics.com/Navig
ator?Zenith701801-List" target="_blank">http://www.matronbsp;
-Matt Dralle, List Admin.
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|