Today's Message Index:
----------------------
1. 02:56 PM - Rear Fuselage Longerons (Perry Delano)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Rear Fuselage Longerons |
Hi All,
The longeron Flanges are 22mm and 20mm. It is quite clear on the bottom skin
that the 22 mm side overlaps the bottom skin, however when it gets to the
directions and drawings for installing the top longerons it does not appear
clear to me whether the longer side overlaps the top skin or the side skins.
The manual is referring to the side skin when it says do it the same as the
bottom skin, which would leave the 22mm overlapping the side skin at the
top. Also, since there is A5 rivets in both flanges at the splice, I am
having a hard time getting my head around why one needs the longer flange on
one side to preserve edge distance. It would be appreciated if someone could
direct me to the drawing that clarifies the latter and why one flange is
wider. Sorry for my thick head on this one.
Regards,
Perry
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|