---------------------------------------------------------- Zenith750-List Digest Archive --- Total Messages Posted Wed 12/17/08: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 10:34 AM - (Jim Smith) 2. 10:44 AM - Re: Corvair Source (Brady) 3. 03:12 PM - Re: (KMHeide, BA, CPO, FAAOP) 4. 04:59 PM - Re: Wings (ken carp) 5. 06:04 PM - Re: (JIm Smith) ________________________________ Message 1 _____________________________________ Time: 10:34:55 AM PST US From: "Jim Smith" Subject: Zenith750-List: I'm building my CH750 right now. So far, I've finished the horizontal stab, elevator/trim, both wings, slats, flaperons and am about 60% done with the fuselage. I've had no problems. Biggest issues was a fiberglass wingtip (port side) that wasn't cast correctly and they're redo-ing their moulds. Looking back at 701 and 801 photo guides I can see how frustrating building could be but this CNC predrilled work is fantastic. I expect to be flying this bird by March '09. Couldn't be happier. Jim Smith Claremore, Oklahoma ________________________________ Message 2 _____________________________________ Time: 10:44:23 AM PST US Subject: Zenith750-List: Re: Corvair Source From: "Brady" Ken, They have had a death in the family recently. Perhaps that's why things haven't been mailed in a timely manner? Just a thought. -------- Brady McCormick Poulsbo, WA www.magnificentmachine.com Read this topic online here: http://forums.matronics.com/viewtopic.php?p=219816#219816 ________________________________ Message 3 _____________________________________ Time: 03:12:18 PM PST US From: "KMHeide, BA, CPO, FAAOP" Subject: Re: Zenith750-List: Great Jim! - Have you been taking photos of your build? Any web page you have that we co uld visit and observe your-work? - I-am very glad to hear your comments on their kit! makes me feel at ease and I am looking forward to building their plane.- - Ken H Hawley, MN - --- On Wed, 12/17/08, Jim Smith wrote: From: Jim Smith Subject: Zenith750-List: I'm building my CH750 right now.- So far, I've finished the horizontal st ab, elevator/trim, both wings, slats, flaperons and am about 60% done with the fuselage.- I've had no problems.- Biggest issues was a fiberglass w ingtip (port side) that wasn't cast correctly and they're redo-ing their mo ulds.- Looking back at 701 and 801 photo guides I can see how frustrating building could be but this CNC predrilled work is fantastic.- I expect t o be flying this bird by March '09.- Couldn't be happier. Jim Smith Claremore, Oklahoma =0A=0A=0A ________________________________ Message 4 _____________________________________ Time: 04:59:00 PM PST US Subject: Zenith750-List: Re: Wings From: "ken carp" Have finished the right wing except installing the gas tank and tip. The tip fit well before riveting everything. Will install the tip tomorrow but want to run a wire out to the tip in case decide to add lights later. The plans are ok but a manual would be a big help. With the pre-drilled pilot holes, it goes together about like you would figure looking at the plans. The dvd of the 701 is a big help though not exactly like the 750. The 750 wing is easier than the 701 looks on the dvd. Ken carpenter -------- ken carpenter Read this topic online here: http://forums.matronics.com/viewtopic.php?p=219879#219879 ________________________________ Message 5 _____________________________________ Time: 06:04:58 PM PST US From: JIm Smith Subject: Re: Zenith750-List: I have Ken. I do not have them on a web page but will pick a few and send you some. You will LOVE working this kit. It is sooooo easy to build. JS On Dec 17, 2008, at 5:12 PM, KMHeide, BA, CPO, FAAOP wrote: > Great Jim! > > Have you been taking photos of your build? Any web page you have > that we could visit and observe your work? > > I am very glad to hear your comments on their kit! makes me feel at > ease and I am looking forward to building their plane. > > Ken H > Hawley, MN > > > --- On Wed, 12/17/08, Jim Smith wrote: > From: Jim Smith > Subject: Zenith750-List: > To: zenith750-list@matronics.com > Date: Wednesday, December 17, 2008, 12:33 PM > > I'm building my CH750 right now. So far, I've finished the > horizontal stab, elevator/trim, both wings, slats, flaperons and am > about 60% done with the fuselage. I've had no problems. Biggest > issues was a fiberglass wingtip (port side) that wasn't cast > correctly and they're redo-ing their moulds. Looking back at 701 > and 801 photo guides I can see how frustrating building could be but > this CNC predrilled work is fantastic. I expect to be flying this > bird by March '09. Couldn't be happier. > Jim Smith > Claremore, Oklahoma > > _- > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > ====================== > _- > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > ====================== > _- > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > ====================== > _- > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > ====================== ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message zenith750-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Zenith750-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/zenith750-list Browse Digests http://www.matronics.com/digest/zenith750-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.