Today's Message Index:
----------------------
1. 10:20 AM - "L" (Bruce Cruikshank)
2. 06:38 PM - Re: Standard L angle dimensions (Joe Harrington)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Joe,
Just measured the L that came with my kit.
It is 19 X 19 mm X .025"
b/c
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Standard L angle dimensions |
Thanks Craig and Bruce!
For the life of me, I can't see where the dimensions are shown in the
plans. No matter, thanks to you guys, I will keep plodding along.
Regards,
Joe
CH750 scratch building
On 8-May-09, at 11:52 PM, Craig Payne wrote:
>
> <craig@craigandjean.com>
>
> I only have the 701 and 601XL plans but look on some of the first
> pages of
> the plans. The width before bending (Developed Length) is 36 mm and
> is bent
> from 0.025 inch sheet. Bend with a radius of 1/8th inch. They are
> generally
> made across the full width of a 4 foot sheet so are called out with
> a length
> of 1219 mm. I wrote an article on a simple press brake made out of
> 2 by 4s
> and C-clamps for bending these if you want it. It was in the Zenith
> newsletter a few issues ago.
>
> -- Craig
>
> -----Original Message-----
> From: owner-zenith750-list-server@matronics.com
> [mailto:owner-zenith750-list-server@matronics.com] On Behalf Of Joe
> Harrington
> Sent: Friday, May 08, 2009 11:44 PM
> To: Zenith 750 List
> Subject: Zenith750-List: Standard L angle dimensions
>
>
> Hi,
>
> The assembly manual refers to using some standard L angle aluminum. I
> have looked through the plans, assembly manual, construction
> standards but can't see what the dimensions are. Is it 20mm flanges x
> 0.025"? Or what? Thanks in advance.
>
> Joe
> 750 Scratch Build
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|