Today's Message Index:
----------------------
1. 02:34 PM - Re: Fw: Possible mistake upper spar cap CH 750 75-W-2 Illustration 2 Angle dimension given is 40 mm should be 52 mm? (joe motis)
2. 09:04 PM - The folding wing option (stepinwolf)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Fwd: Possible mistake upper spar cap CH 750 75-W-2 |
Illustration 2 Angle dimension given is 40 mm should be 52 mm?
One of my hangar buddies plotted it out on the computer and it works
perfectly at 40 mm if the extrusion is 3/4"x3/4" instead of 1"x1"
What other mistakes has any one found on the second set of prints for the CH
750??
This was a $40 mistake and I can't even claim credit.
Joe Motis
CH 750 WW Corvair
On Sun, Feb 7, 2010 at 8:18 PM, Art Olechowski <ifly4fun2@sbcglobal.net>wrote:
> Joe,
> Great catch and likely only something a scratch builder would have caught.
> I'm not as far a long as you are but I've made note to cut the upper spar
> cap angle using the web as the guide. Thank you for passing along your
> finding.
>
>
> Art
> Wichita, KS
> do not archive
>
>
> --- On *Sun, 2/7/10, joe motis <joemotis@gmail.com>*wrote:
>
>
> From: joe motis <joemotis@gmail.com>
> Subject: Zenith750-List: Fwd: Possible mistake upper spar cap CH 750 75-W-2
> Illustration 2 Angle dimension given is 40 mm should be 52 mm?
> To: zenith750-list@matronics.com
> Date: Sunday, February 7, 2010, 5:11 PM
>
>
> ---------- Forwarded message ----------
> From: joe motis <joemotis@gmail.com<http://mc/compose?to=joemotis@gmail.com>
> >
> Date: Sun, Feb 7, 2010 at 3:09 PM
> Subject: Fwd: Possible mistake upper spar cap CH 750 75-W-2 Illustration 2
> Angle dimension given is 40 mm should be 52 mm?
> To: joe motis <joemotis@gmail.com<http://mc/compose?to=joemotis@gmail.com>
> >
>
>
> Hi Listers,
>
> I am building the wing spars and I made both upper spar caps with a 40 mm
> diimension on the angle cut end. It does not fit the way it is supposed to.
> The actual measurement needs to be 52 mm. The 80 mm up and 272 mm
> over dimension have both been checked and are correct for the spar angle.
>
>
> Anyone else have this issue?.
> Page 75-W-2 Illustration 2 Upper spar cap
>
> Thanks
> Joe Motis
> CH 750 WW Corvair
>
>
> *
>
>
> *
>
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | The folding wing option |
Does anyone have any information regarding the folding wing option, ( price, availability,
etc. ) that is shown on the Zenith web site. It look's as though
it would be much more pracital, and better engineered, that the 701 folding wing.
Personally I think that it would be a great additionel feature, rather then an
option that we will most probably be obliged to pay for at a later date.
Robert
--------
Live each day, as if it was your last
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=285781#285781
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|