---------------------------------------------------------- Zenith750-List Digest Archive --- Total Messages Posted Tue 02/09/10: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:34 PM - Re: Fw: Possible mistake upper spar cap CH 750 75-W-2 Illustration 2 Angle dimension given is 40 mm should be 52 mm? (joe motis) 2. 09:04 PM - The folding wing option (stepinwolf) ________________________________ Message 1 _____________________________________ Time: 02:34:08 PM PST US Subject: Re: Zenith750-List: Fwd: Possible mistake upper spar cap CH 750 75-W-2 Illustration 2 Angle dimension given is 40 mm should be 52 mm? From: joe motis One of my hangar buddies plotted it out on the computer and it works perfectly at 40 mm if the extrusion is 3/4"x3/4" instead of 1"x1" What other mistakes has any one found on the second set of prints for the CH 750?? This was a $40 mistake and I can't even claim credit. Joe Motis CH 750 WW Corvair On Sun, Feb 7, 2010 at 8:18 PM, Art Olechowski wrote: > Joe, > Great catch and likely only something a scratch builder would have caught. > I'm not as far a long as you are but I've made note to cut the upper spar > cap angle using the web as the guide. Thank you for passing along your > finding. > > > Art > Wichita, KS > do not archive > > > --- On *Sun, 2/7/10, joe motis *wrote: > > > From: joe motis > Subject: Zenith750-List: Fwd: Possible mistake upper spar cap CH 750 75-W-2 > Illustration 2 Angle dimension given is 40 mm should be 52 mm? > To: zenith750-list@matronics.com > Date: Sunday, February 7, 2010, 5:11 PM > > > ---------- Forwarded message ---------- > From: joe motis > > > Date: Sun, Feb 7, 2010 at 3:09 PM > Subject: Fwd: Possible mistake upper spar cap CH 750 75-W-2 Illustration 2 > Angle dimension given is 40 mm should be 52 mm? > To: joe motis > > > > > Hi Listers, > > I am building the wing spars and I made both upper spar caps with a 40 mm > diimension on the angle cut end. It does not fit the way it is supposed to. > The actual measurement needs to be 52 mm. The 80 mm up and 272 mm > over dimension have both been checked and are correct for the spar angle. > > > Anyone else have this issue?. > Page 75-W-2 Illustration 2 Upper spar cap > > Thanks > Joe Motis > CH 750 WW Corvair > > > * > > > * > > ________________________________ Message 2 _____________________________________ Time: 09:04:46 PM PST US Subject: Zenith750-List: The folding wing option From: "stepinwolf" Does anyone have any information regarding the folding wing option, ( price, availability, etc. ) that is shown on the Zenith web site. It look's as though it would be much more pracital, and better engineered, that the 701 folding wing. Personally I think that it would be a great additionel feature, rather then an option that we will most probably be obliged to pay for at a later date. Robert -------- Live each day, as if it was your last Read this topic online here: http://forums.matronics.com/viewtopic.php?p=285781#285781 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message zenith750-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Zenith750-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/zenith750-list Browse Digests http://www.matronics.com/digest/zenith750-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.