Matronics Email Lists

I've given up planes and taken up Harley's. The kit is almost finished and available if you want to make an offer.

A link to many photos below.

I've given up planes and taken up Harley's. The kit is almost finished and available if you want to make an offer.

A link to many photos below.

I couldn't find it either. I ended up with an inline fuse.

Hey Guys--
�� I just tried to access the new photo guides that were posted yesterday on the� Zenith site.� Problem is I continue to find myself in a loop trying to access them.
I get to the ...

FYI... When I installed it I did away with the hinge at the front. It looked to me that it would just be in the way when you had to actually work in there.

Those pictures tell nothing. Every bit of that damage could have happened on impact. Where the wing connects to the fuselage is what we need to see.

.and that, IMHO, is the acid test. It didn't work in the field, when measured
over a long period of time, as determined by a qualified and knowledgable
observer.

Here's a data point to add ...

Boy, NASA is really going to a lot of trouble to keep that old story that they went to the moon alive, aren't they?

Zenith/AMD did.

If you didn't buy it yet I have an unused new PM3000 that I would sell at a
reduced price. Mine has the voice recorder feature.

PS Engineering PM3000 4 place intercom w/voice recorder (non-TSO'd) ...

The guys at SteinAir talked me into a PM3000 intercom because of the lack of inputs on an A210. Of course I needed the Dynon180, Garmin 496 and iPod to go in.

I was told (on the phone with Zenith Friday) that there are some errors in the current drawings and the I would not have to drive any solid rivets to do the modifications.

I think it was July. It was posted in one of the letters from CH.

Dear Zenith Builder,
We are pleased to announce that Zenith Aircraft Company has recently appointed Aircraft Spruce & Specialty Co. as the official parts supplier for Zenith builders. If you do ...

Gig,

Are you sure you have opened the bleeder valve? You twist the small black fitting, not the larger brass fitting.

Jay

--

That might help... Thanks.

OK, just so nobody just quotes the Grove instructions here they are.

My problem is when I pump the oil can NOTHING goes into the brakes.

The best method to fill and bleed aircraft brakes is from ...

Hi Rich,

I wouldn't use aluminum for this purpose.

Somebody better tell Aircraft Spruce. http://www.aircraftspruce.com/search/search.php?query=heat+muff&search=1

CESSNA TYPE HEAT MUFF ...

The letter itself says: "It appears . . .flutter . . . likely source". This is a country mile away from a statement that flutter caused the accidents. It is merely a conjecture that ...

...your plane because of the NTSB letter or the issues surrounding it?

<xml><xml><endif> Gig, how about using a T-shaped outer piece? The stem of the T wouldn't need to be more than 3/4" or create too much drag, but it ought to greatly stiffen ...