Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Starter question

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
Lew Gallagher



Joined: 04 Jan 2008
Posts: 402
Location: Greenville , SC

PostPosted: Sun Nov 01, 2009 9:29 am    Post subject: Starter question Reply with quote

Hey Guys,

Here's a quick question. We bought a rebuilt Lycoming IO 540 that came with a starter installed. We're getting close to final assembly and I noticed that the throw-out gear that engages the ring gear seems spring loaded to stay engaged. On cars, this is opposite and retracts after starting. Does this somehow work the same way -- once it fires the gear spins back? Or is it something I should look into? I can get the model of the starter later today if that's necessary. I noticed this after testing the switch/relay/starter circuit by bumping the starter switch with the ring gear off. Thanks.

Later, - Lew


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
non-pilot
crazy about building
NOW OFICIALLY BUILDER #40549
Fly off completed !
Back to top
View user's profile Send private message Send e-mail
deej(at)deej.net
Guest





PostPosted: Sun Nov 01, 2009 10:13 am    Post subject: Starter question Reply with quote

On 11/1/2009 12:29 PM, Lew Gallagher wrote:
Quote:
We're getting close to final assembly and I noticed that the throw-out gear that engages the ring gear seems spring loaded to stay engaged.

Hi Lew,
Once the engine starts the starter gear is disengaged from the starter
ring.

-Dj

--
Dj Merrill - N1JOV
Glastar Sportsman 2+2 Builder #7118 N421DJ - http://deej.net/sportsman/
Grumman Yankee Driver N9870L - http://deej.net/yankee/


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
wcurtis(at)nerv10.com
Guest





PostPosted: Sun Nov 01, 2009 10:48 am    Post subject: Starter question Reply with quote

Assuming this is an older aviation starter, what you are looking at is a starter Bendix.  Unlike automotive (and some new aviation) starters, these older starters use a Bendix mechanism that engages when the starter is turned and retracts when starter is disengaged.  When maintained properly, starter Bendix work well enough but solenoids work better.
 
If that starer is bad, upgrade to a Skytec NL starter with an in-line solenoid.
 
William
http://wcurtis.nerv10.com/
On Sun, Nov 1, 2009 at 1:29 PM, Lew Gallagher <lewgall(at)charter.net (lewgall(at)charter.net)> wrote:
Quote:
--> RV10-List message posted by: "Lew Gallagher" <lewgall(at)charter.net (lewgall(at)charter.net)>

Hey Guys,

Here's a quick question.  We bought a rebuilt Lycoming IO 540 that came with a starter installed.  We're getting close to final assembly and I noticed that the throw-out gear that engages the ring gear seems spring loaded to stay engaged.  On cars, this is opposite and retracts after starting.  Does this somehow work the same way -- once it fires the gear spins back?  Or is it something I should look into?  I can get the model of the starter later today if that's necessary.  I noticed this after testing the switch/relay/starter circuit by bumping the starter switch with the ring gear off.  Thanks.

Later, - Lew

--------
non-pilot
crazy about building
NOW OFICIALLY BUILDER #40549
Painting done!
On with wiring and avionics.


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=270463#270463
ber is the Annual List Fund Raiser.  Click on
-=     * AeroElectric www.aeroelectric.com
omebuiltHELP www.homebuilthelp.com
http:/r generous support!
nics List Features Navigator to browse
s.com/Navigator?RV10-List" target="_blank">http://www.matronics.com/Navigator?RV10-List
ronics.com/" target="_blank">http://forums.matronics.com
==============



--
William
N40237 - http://wcurtis.nerv10.com/
[quote][b]


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Lew Gallagher



Joined: 04 Jan 2008
Posts: 402
Location: Greenville , SC

PostPosted: Mon Nov 02, 2009 4:04 pm    Post subject: Re: Starter question Reply with quote

Thanks for the responses DJ and William.

After further research, this is a Kelly Aerospace MZ 4222 starter and the drive gear disengages once the engine reaches 400 rpm. It lists for $1272 new ... wow. Rebuilt $365 w/ $200 core charge.

Probably much heavier than the Skytec starters, but we'll see how it works.

Later, - Lew


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
non-pilot
crazy about building
NOW OFICIALLY BUILDER #40549
Fly off completed !
Back to top
View user's profile Send private message Send e-mail
dlm46007(at)cox.net
Guest





PostPosted: Mon Nov 02, 2009 4:23 pm    Post subject: Starter question Reply with quote

You probably ought to plan now to get the correct Skytec as they are less
than half the weight and (IIRC) have no Bendix which requires lubrication
and cleaning. If your current starter is new you may be able to trade to get
the Skytec.

--


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group