Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Seat slide adjustment

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
cooprv7(at)yahoo.com
Guest





PostPosted: Fri Aug 31, 2018 11:30 pm    Post subject: Seat slide adjustment Reply with quote

My RV-10 is pushing 12 years old and the right seat has always been difficult to slide but not an issue until my wife had wanted to learn to fly. I’ve tried various lubricants but sense the real issue is a slight misalignment of the seat rails. Has anyone found a way to tweak these or any other solutions?

Thanks,
Marcus
40286


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Bob Turner



Joined: 03 Jan 2009
Posts: 881
Location: Castro Valley, CA

PostPosted: Sat Sep 01, 2018 2:38 pm    Post subject: Re: Seat slide adjustment Reply with quote

I seem to recall the same issue - right seat hard to move, especially when fully aft. I loosened the rail fasteners in the aft end, and the seat motion was much better. I shimmed as needed, re-tightened the bolts. I cannot recall exactly where I put the shims, but it may have been the supporting structure that extends aft and looks like an inverted ‘L’.

- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Bob Turner
RV-10 QB
Back to top
View user's profile Send private message Send e-mail
cooprv7(at)yahoo.com
Guest





PostPosted: Sat Sep 01, 2018 5:52 pm    Post subject: Seat slide adjustment Reply with quote

Thanks, I’ll give that a try.

Marcus

Quote:
On Sep 1, 2018, at 6:38 PM, Bob Turner <bobturner(at)alum.rpi.edu> wrote:
Do not archive


I seem to recall the same issue - right seat hard to move, especially when fully aft. I loosened the rail fasteners in the aft end, and the seat motion was much better. I shimmed as needed, re-tightened the bolts. I cannot recall exactly where I put the shims, but it may have been the supporting structure that extends aft and looks like an inverted ‘L’.

--------
Bob Turner
RV-10 QB




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=482846#482846











- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
klangley1(at)mygrande.net
Guest





PostPosted: Sat Sep 01, 2018 7:14 pm    Post subject: Seat slide adjustment Reply with quote

In case anyone is counting, mine is 13 years old and exactly the same problem. It seems to have gotten worse recently but I haven’t yet really addressed it. I’ll be watching to see if others have come up with good solutions.

Sent from my iPhone

Quote:
On Sep 1, 2018, at 8:49 PM, Marcus Cooper <cooprv7(at)yahoo.com> wrote:



Thanks, I’ll give that a try.

Marcus



> On Sep 1, 2018, at 6:38 PM, Bob Turner <bobturner(at)alum.rpi.edu> wrote:
> Do not archive
>
>
> I seem to recall the same issue - right seat hard to move, especially when fully aft. I loosened the rail fasteners in the aft end, and the seat motion was much better. I shimmed as needed, re-tightened the bolts. I cannot recall exactly where I put the shims, but it may have been the supporting structure that extends aft and looks like an inverted ‘L’.
>
> --------
> Bob Turner
> RV-10 QB
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=482846#482846
>
>
>
>
>
>
>
>
>








- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
bcondrey



Joined: 03 Apr 2006
Posts: 580

PostPosted: Sat Sep 01, 2018 7:30 pm    Post subject: Seat slide adjustment Reply with quote

html { background-color: transparent; } body { color: #333; line-height: 150%; font-family: "-apple-system", "HelveticaNeue"; margin: 0; } .ms-outlook-ios-reference-expand { display: block; color: #999; padding: 20px 0px; text-decoration: none; } .ms-outlook-ios-availability-container { max-width: 500px; margin: auto; padding: 12px 15px 15px 15px; border: 1px solid #C7E0F4; border-radius: 4px; } .ms-outlook-ios-availability-container > .ms-outlook-ios-availability-delete-button { width: 25px; height: 25px; right: -12px; top: -12px; background-image: url("data:image/png;base64,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"); background-size: 25px 25px; background-position: center; } #ms-outlook-ios-main-container { margin: 0 0 0 0; margin-top: 120; padding: 8; } #ms-outlook-ios-content-container { padding: 0; padding-top: 12; padding-bottom: 20; } .ms-outlook-ios-mention { color: #333; background-color: #f1f1f1; border-radius: 4px; padding: 0 2px 0 2px; pointer-events: none; text-decoration: none; } If you pull the seat and put a level across the rails you may find one or all bowed a bit. If so, as suggested add shims as necessary. If not bowed, then clean out the “crud” in the guides.


Bob





From: 30171660600n behalf of
Sent: Saturday, September 1, 2018 9:17 PM
To: rv10-list(at)matronics.com
Subject: Re: Re: Seat slide adjustment

--> RV10-List message posted by: Kenneth Langley <klangley1(at)mygrande.net>

In case anyone is counting, mine is 13 years old and exactly the same problem. It seems to have gotten worse recently but I haven’t yet really addressed it. I’ll be watching to see if others have come up with good solutions.

Sent from my iPhone

> On Sep 1, 2018, at 8:49 PM, Marcus Cooper <cooprv7(at)yahoo.com> wrote:
>
> --> RV10-List message posted by: Marcus Cooper <cooprv7(at)yahoo.com>
>
> Thanks, I’ll give that a try.
>
> Marcus
>
>
>
>> On Sep 1, 2018, at 6:38 PM, Bob Turner <bobturner(at)alum.rpi.edu> wrote:
>> Do not archive
>> --> RV10-List message posted by: "Bob Turner" <bobturner(at)alum.rpi.edu>
>>
>> I seem to recall the same issue - right seat hard to move, especially when fully aft. I loosened the rail fasteners in the aft end, and the seat motion was much better. I shimmed as needed, re-tightened the bolts. I cannot recall exactly where I put the shims, but it may have been the supporting structure that extends aft and looks like an inverted ‘L’.
>>
>> --------
>> Bob Turner
>> RV-10 QB
>>
>>
>>
>>
>> Read this topic online here:
>>
>> http://forums.matronics.com/viewtopic.php?p=482846#482846
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
>
>
>
>


===========
===========
===========
===========
===========


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
View user's profile Send private message Send e-mail
jrlark



Joined: 03 Jul 2009
Posts: 72

PostPosted: Sun Sep 02, 2018 4:50 am    Post subject: Seat slide adjustment Reply with quote

Marcus, the best way to see if your rails are un-parallel is to use a couple of straight edges across the front and back of the rails. This little process is known as "using winding sticks". Google it and you'll see how simple it is (old woodworking trick).
I did that when I built my -10 and soon found where a shim(s) were needed. My seats slide perfectly.

Rick
#40956
C-GDMH

--


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
View user's profile Send private message Send e-mail
cooprv7(at)yahoo.com
Guest





PostPosted: Sun Sep 02, 2018 5:52 am    Post subject: Seat slide adjustment Reply with quote

Thanks Rick.
My plan was to do that but wasn’t sure if there was any play allowance in the rails. From my dim recollection there really wasn’t any.

Marcus

Quote:
On Sep 2, 2018, at 8:47 AM, Sandra & Rick <jrlark(at)bmts.com> wrote:

Do not archive

[quote]

Marcus, the best way to see if your rails are un-parallel is to use a couple of straight edges across the front and back of the rails. This little process is known as "using winding sticks". Google it and you'll see how simple it is (old woodworking trick).
I did that when I built my -10 and soon found where a shim(s) were needed. My seats slide perfectly.

Rick
#40956
C-GDMH

--


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group