Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Trying to find a Robin

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
jjessen(at)rcn.com
Guest





PostPosted: Fri Feb 03, 2006 10:09 am    Post subject: Trying to find a Robin Reply with quote

Robin Wessel, if you're monitoring the list, can you send me an email offline.  We're trying to get a dinner arranged of Oregon RV-10 builders for next week, the opportunity based on Tim's visit for transition training, and we cannot locate an email for you.  Thanks
John Jessen
  ~328
do not archive

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of bob.kaufmann
Sent: Friday, February 03, 2006 6:03 AM
To: rv10-list(at)matronics.com
Subject: RE: 3 ring binder for manual


John
 
I laughed so hard, my sides hurt and now I have to go to work and protect this country.  The pain in my side may be the beginning of a national emergency because of the laughter.
 
Bob K
Forward top cowling

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of John Jessen
Sent: Thursday, February 02, 2006 9:12 AM
To: rv10-list(at)matronics.com
Subject: RE: 3 ring binder for manual

 
I just rip each page out (I've given up trying to keep the holes from ripping), immediately spill some hot tea on it to give it its proper staining, fold it up and stuff it in my briefcase so I can unfold it in the airport and look at it seriously hoping to impress someone with my technical acumen.  Mainly I take the page out so I can have that one page near, beside, on top of the work at hand.  Then, once finished with it, I take it home with me so it's near the computer and I can enter my notes and time, then finally onto a "completed" file of other, heroically stained and mangled pages.  War is war.  I stand on the front line between aluminum and civilization.  You need me on that line; you want me on that line.  I don't have the time, nor the inclination to pamper my pages. 
 
Histrionically yours,
 
John Jessen
  ~328 (skinning the Tailcone)
 

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Chuck Jensen
Sent: Thursday, February 02, 2006 8:01 AM
To: rv10-list(at)matronics.com
Subject: RE: 3 ring binder for manual
To reinforce the pages and prevent rip-out, run a strip of Scotch tape along the edge of the page, covering the holes.  Punch the holes again and you have a super strong edge with holes that won’t rip out.  Cost: 0.01 cents per page.
 
Chuck Jensen

 
-----Original Message-----
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Mike Lauritsen - Work
Sent: Thursday, February 02, 2006 10:41 AM
To: rv10-list(at)matronics.com
Subject: RE: 3 ring binder for manual
 
It’s a bit overkill, but I took two strips of 1/8”x3/4” aluminum from the hardware store and drilled them to correspond to the holes.  I countersunk and attached #8 nutplates to one for the back and countersunk and inserted #8 screws through the front to sandwich all of the pages together.  I went this route mainly because I had so many ripped pages that I needed something to pinch and hold them together.
 
Mike

 
-----Original Message-----
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Chris Hukill
Sent: Thursday, February 02, 2006 12:23 AM
To: rv10-list(at)matronics.com
Subject: 3 ring binder for manual
 
Has anyone found a mail order source for a 3 ring binder for the manual? I keep tearing the holes on mine, and would like to have a real binder for my manual, but I can't find any locally, or on the internet. If anyone knows a source, please let me know.

Thanx

Chris Hukill

Figuring out my aux fuel tank system


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group