 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
flysrv10(at)gmail.com
Guest
|
 Posted: Fri May 16, 2014 3:24 am Post subject: aerosport rudder trim |
 |
|
Hello List,
Anyone has installed Aerosport's rudder trim kit?
Need a picture of the rudder arm angle in relation to horizontal. It seems that in order for the spring to clear the sub panels, the arms have to installed about 25 deg from horizontal and it seems too flat of an angle to me.
His website picture clips the rudder arms.
Thank you.
Rob Kermanj
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
 |
aerosport1
Joined: 07 Nov 2007
Posts: 231
|
| Posted: Fri May 16, 2014 7:23 am Post subject: aerosport rudder trim |
|
|
Rob
If you have the standard vans panel and depending on where you mount the unit you could have a interference with the sub panel.
You can angle the arms if needed a little. The other option is to lower the
Spring holes on the arms
Geoff Combs
Aerosport products
Sent from my iPhoneGeoff Combs
Aerosport Modeling & Design
On May 16, 2014, at 6:23 AM, Rob Kermanj <flysrv10(at)gmail.com (flysrv10(at)gmail.com)> wrote:
[quote]Hello List,
Anyone has installed Aerosport's rudder trim kit?
Need a picture of the rudder arm angle in relation to horizontal. It seems that in order for the spring to clear the sub panels, the arms have to installed about 25 deg from horizontal and it seems too flat of an angle to me.
His website picture clips the rudder arms.
Thank you.
Rob Kermanj
| Quote: |
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
List"">http://www.matronics.com/Navigator?RV10-List
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
//forums.matronics.com
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
ot;">http://www.matronics.com/contribution
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
|
[b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Geoff Combs
RV-10 QB N829GW
Flying 500 hrs
40033 |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
