RURUNY(at)aol.com
Guest
|
 Posted: Thu Jul 20, 2006 2:40 pm Post subject: Batteries and dynon update |
 |
|
Anyone have a dynon product, I have a D10A in my 701.For those interested. There is a new firmware update just out July 10th that enables the AOA tone to headset and has a full screen DG that keeps all the numbers right side up.Many other improvements also.
I just powered up the completed Aerolectric Connection designed electrical system and its
looking good!! I'm using a power supply on the battery terminals. Looking at batteries at
B&C and wondering about Amp hours. Whats reasonable for VFR only. Id like to keep the weight and size of the battery on the low end. Maybe a local night flight not very often, mostly daytime. Any battery install pics in the back seat of a 701 helpful.
I have a rotax 912 with the 20 Amp alternator.
I've attached a pic of panel, hopefully seen at http://www.matronics.com/forums
Lettering has been done with rub on letters and numbers from tower hobbies.
Base paint is grey rustoleum glossy, letters applied and then applied a rustoleum flat clear coat. Used blue painters tape to line up letters and numbers to keep straight. It took alot of time but looks like a military style panel.
This is posted to Aeroelectric List and Zenith list.
Brian
Zenith CH-701
Long Island, NY
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
| Description: |
|
| Filesize: |
1.35 MB |
| Viewed: |
219 Time(s) |
|
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
