Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Break model.

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

flysrv10(at)gmail.com
Guest

Posted: Fri Feb 24, 2017 8:08 am Post subject: Break model.

Guys,



Need help.  Break failure at run up area. Need the wheel and caliper model to get o ring and pads.  Thanks a bunch. 



Sent from my iPhone

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Tim Olson

Joined: 25 Jan 2007
Posts: 2882

Posted: Fri Feb 24, 2017 8:29 am Post subject: Break model.

Hi Rob,



If you are using stock Cleveland, then this is it:



Brake Assembly 30-59E

Brake Pads  66-112

Rivets 105-2

Disc part number RA164-07500 For Rapco version

Wheel Assembly is 40-59A

For caliper o-rings if you can go Viton, do it:



The Viton o-rings are M83248/1-224  V-75



Hope that helps you out!

Tim





On 2/24/2017 10:07 AM, Rob Kermanj wrote:

 	  Quote: 	
		   



 Guys,



 Need help.  Break failure at run up area. Need the wheel and caliper model to get o ring and pads.  Thanks a bunch.

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

bdgillespie215(at)gmail.c
Guest

Posted: Fri Feb 24, 2017 8:30 am Post subject: Break model.

Not sure if this is what you are looking for.... had this noted in my POH.



Main Brakes: 30-59E assy Torque 75-80 in-lb dry  Linings: Cleveland 66-112  Rivets: 105-2   Disc: 164-07500      Fluid: Aeroshell Mil-H-5606G



Sent from my iPad



 	  Quote: 	
		   On Feb 24, 2017, at 11:07 AM, Rob Kermanj <flysrv10(at)gmail.com> wrote:

 

 

 

 Guys,

 

 Need help.  Break failure at run up area. Need the wheel and caliper model to get o ring and pads.  Thanks a bunch. 

 

 Sent from my iPhone

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

flysrv10(at)gmail.com
Guest

Posted: Fri Feb 24, 2017 8:52 am Post subject: Break model.

Thank you! On my way to ABQ to pick up the parts. 



Sent from my iPhone



 	  Quote: 	
		   On Feb 24, 2017, at 9:27 AM, Home <bdgillespie215(at)gmail.com> wrote:

 

 

 

 Not sure if this is what you are looking for.... had this noted in my POH.

 

 Main Brakes: 30-59E assy Torque 75-80 in-lb dry  Linings: Cleveland 66-112  Rivets: 105-2   Disc: 164-07500      Fluid: Aeroshell Mil-H-5606G

 

 Sent from my iPad

 

> On Feb 24, 2017, at 11:07 AM, Rob Kermanj <flysrv10(at)gmail.com> wrote:

> 

> 

> 

> Guys,

> 

> Need help.  Break failure at run up area. Need the wheel and caliper model to get o ring and pads.  Thanks a bunch. 

> 

> Sent from my iPhone

> 

> 

>

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

gengrumpy

Joined: 07 May 2013
Posts: 131
Location: Tullahoma, TN

Posted: Fri Feb 24, 2017 9:01 am Post subject: Break model.

Hope this helps!

grumpy        Cleveland,   Wheel 40-59A; Disc 164-07500            Grease   seals: 153-00300 outer; 153-00400 inner. Snap ring 155-00100. Lining   066-11200. Rivet 105-00200. Dust Sheld 157-00900; Wheel bolts AN5-34A;   MS21044-N5 nuts                  Timken   Bearing LM274949-2-629, cotter pin AN 380-3-8. Torque halves 150in lb dry         	  Quote: 	
		  On Feb 24, 2017, at 10:52 AM, Rob Kermanj <flysrv10(at)gmail.com (flysrv10(at)gmail.com)> wrote:

--> RV10-List message posted by: Rob Kermanj <flysrv10(at)gmail.com (flysrv10(at)gmail.com)> Thank you! On my way to ABQ to pick up the parts. Sent from my iPhone 	  Quote: 	
		  On Feb 24, 2017, at 9:27 AM, Home <bdgillespie215(at)gmail.com (bdgillespie215(at)gmail.com)> wrote:--> RV10-List message posted by: Home <bdgillespie215(at)gmail.com (bdgillespie215(at)gmail.com)>Not sure if this is what you are looking for.... had this noted in my POH.Main Brakes: 30-59E assy Torque 75-80 in-lb dry  Linings: Cleveland 66-112  Rivets: 105-2   Disc: 164-07500      Fluid: Aeroshell Mil-H-5606GSent from my iPad 	  Quote: 	
		  On Feb 24, 2017, at 11:07 AM, Rob Kermanj <flysrv10(at)gmail.com (flysrv10(at)gmail.com)> wrote:--> RV10-List message posted by: Rob Kermanj <flysrv10(at)gmail.com (flysrv10(at)gmail.com)>Guys,Need help.  Break failure at run up area. Need the wheel and caliper model to get o ring and pads.  Thanks a bunch. Sent from my iPhone 	
	
http://www.matronics.com/Navigator?RV10-Listhttp://wiki.matronics.com

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

rv10flyer

Joined: 25 Aug 2009
Posts: 364

Posted: Sat Feb 25, 2017 7:06 am Post subject: Re: Break model.

I'd like to upgrade to Matco someday, as Van's chose a marginally sized brake system.

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Wayne G.

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum