Matronics Email Lists :: View topic - Z-13 v. SD-8 distribution Diagrams

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Z-13 v. SD-8 distribution Diagrams

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

piavis(at)comcast.net
Guest

Posted: Mon Dec 11, 2006 2:39 pm Post subject: Z-13 v. SD-8 distribution Diagrams

I’m in the process of wiring up the SB005-1 (S704-1?) relay with the SD-8 volt regulator and the OVM. The SD-8 distribution diagram (Dwg 504-500 rev E, 9/29/04) seems to differ from the Z-13 diagram and I’m wondering which to follow. Dwg. 504-500 refers to the relay as SB005-1, and elsewhere, it looks like the part number is S704-1. I’m not sure if these are one in the same or not.   

   

The photo at http://www.bandc.biz/S704-1_tips.html is even different and includes an additional diode installed where the OVM-14 should be installed.  

   

Anyone have a good diagram or guidance on which drawing is correct? I’m thinking that Z-13 may be the correct drawing for the application.  

   

Jim  

-7 Wiring    

       [quote][b]

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

nuckollsr(at)cox.net
Guest

Posted: Wed Dec 13, 2006 10:16 am Post subject: Z-13 v. SD-8 distribution Diagrams

At 02:38 PM 12/11/2006 -0800, you wrote:



 	  Quote: 	
		  I m in the process of wiring up the SB005-1 (S704-1?) relay with the SD-8 

volt regulator and the OVM. The SD-8 distribution diagram (Dwg 504-500 rev 

E, 9/29/04) seems to differ from the Z-13 diagram and I m wondering which 

to follow. Dwg. 504-500 refers to the relay as SB005-1, and elsewhere, it 

looks like the part number is S704-1. I m not sure if these are one in the 

same or not.



The photo at 

<http://www.bandc.biz/S704-1_tips.html>http://www.bandc.biz/S704-1_tips.html 

is even different and includes an additional diode installed where the 

OVM-14 should be installed.



Anyone have a good diagram or guidance on which drawing is correct? I m 

thinking that Z-13 may be the correct drawing for the application.


	




    Both are.



    The S704-1 and similar relays (like eggs, flour and milk)

    are used in a variety of recipes and each recipe may treat

    that ingredient in a manner that is not consistent elsewhere.



    When you're baking a cake, you don't take a handful of recipes

    from multiple sources and then attempt to resolve differences

    between them. When someone publishes a recipe, you need

    to know if it's from a credible source and if the recipe is

    a demonstrated pathway to success. If those conditions are

    satisfied, then run with it.



    Bob . . .

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum