Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Sunday
Goto page 1, 2 Next

Matronics Email Lists Forum Index -> RVSouthEast-List

View previous topic :: View next topic

Author Message

Steve Glasgow

Joined: 10 Jan 2006
Posts: 674

Posted: Sat Feb 18, 2006 1:02 pm Post subject: Sunday

OK guys who is up for Sunday?



Cappy and Randy are planning on MTV around 12:30 then an oil change for 

Cappy's Toy.



That's in VA Stormy.  Is your grass still white?



BTW today was a big day for Randy.  He now has wings on his RV-7.



Cappy

_________________
Steve Glasgow-Cappy
Cappy's Toy
RV-8 N123SG

John Clark

Joined: 15 Jan 2006
Posts: 10
Location: Ashburn, VA

Posted: Sat Feb 18, 2006 1:51 pm Post subject: Sunday

I may try MTV.  Some of the Mid-Atlantic group may be going to 9VG, Campbell field on the eastern shore (www.CampbellFieldAirport.com)for the Soup on Sunday program.  Chili and hot dogs if it goes this weekend, but I am concerned about the grass field, don't want to get my pants dirty.  I think the field is probably just fine.  Regards, John.



"Steve Glasgow" <willfly(at)carolina.rr.com> wrote:



 	  Quote: 	
		  



OK guys who is up for Sunday?



Cappy and Randy are planning on MTV around 12:30 then an oil change for 

Cappy's Toy.



That's in VA Stormy. Is your grass still white?



BTW today was a big day for Randy. He now has wings on his RV-7.



Cappy

_________________
John Clark
RV-9A 90512
N6699

sportav8r(at)aol.com
Guest

Posted: Sat Feb 18, 2006 2:58 pm Post subject: Sunday

My grass got briefly white this morning but gone by noon.  High gusts today.  I'll check wx and may see the gang at MTV tomorrow for lunch.

 

-Stormy 

 

--

sportav8r(at)aol.com
Guest

Posted: Sat Feb 18, 2006 3:06 pm Post subject: Sunday

They're calling for 1 knot winds and clear skies at MTV tomorrow.  Even the taildragger pilots can probably handle that, if it's not a direct crosswind 

 

I may have to make this one; I'm plumb out of excuses, thanks to Cappy's geography lesson.

 

Will you still be there by 1:30? I may be a tad late.

 

-Stormy



--

Steve Glasgow

Joined: 10 Jan 2006
Posts: 674

Posted: Sat Feb 18, 2006 4:38 pm Post subject: Sunday

OK lets make it 1:00 at MTV.  See you Stormy.



Who else is in?



Cappy

  ---

_________________
Steve Glasgow-Cappy
Cappy's Toy
RV-8 N123SG

sportav8r(at)aol.com
Guest

Posted: Sat Feb 18, 2006 7:01 pm Post subject: Sunday

Please, don't all chime in at once.  My server ge 

 

--

Larry Bowen

Joined: 09 Jan 2006
Posts: 802
Location: NC, USA

Posted: Sat Feb 18, 2006 8:20 pm Post subject: Sunday

Wish I could.  Still no airplane.  Seems like forever.  Arhg...with that

x-wind I probably couldn't anyway...



-

Larry Bowen

Larry(at)BowenAero.com

http://BowenAero.com

Do not archive 



[quote] --

_________________
Larry Bowen
RV-8 SOLD,
RV-7QB in progress...

bill(at)repucci.com
Guest

Posted: Sat Feb 18, 2006 8:40 pm Post subject: Sunday

Cappy,



Was that Randy U. you are referring to?



Sounds like he is making some good progress!



Bill



--

Steve Glasgow

Joined: 10 Jan 2006
Posts: 674

Posted: Sun Feb 19, 2006 4:32 am Post subject: Sunday

Yes, Randy Utsey. 



Cappy

  ---

_________________
Steve Glasgow-Cappy
Cappy's Toy
RV-8 N123SG

dwmillsap(at)netzero.net
Guest

Posted: Sun Feb 19, 2006 5:37 am Post subject: Sunday

Is there food at MTV? Dennis might come, but he'll want lunch. (c:



-- sportav8r(at)aol.com wrote:




Please, don't all chime in at once.  My server ge 

 

--

Steve Glasgow

Joined: 10 Jan 2006
Posts: 674

Posted: Sun Feb 19, 2006 5:48 am Post subject: Sunday

Yes great food.  You can watch your plane while you eat.



Cappy

  ---

_________________
Steve Glasgow-Cappy
Cappy's Toy
RV-8 N123SG

Ed Anderson

Joined: 10 Jan 2006
Posts: 475

Posted: Sun Feb 19, 2006 6:21 am Post subject: Sunday

Wish I could come, Cappy. But, just got back from a 17.3 hour 2500+ mile 

trip to and around Texas and am "flown out".  What a trip - on one leg 

headwinds had ground speed down to 115 MPH and on another tailwinds had 

speed up to 220 MPH - quite a difference.  Made it from Dallas to San 

Antonio in 1 hour 10 minutes, could have made it a bit quicker, but had to 

detour around you-know-whose Texas ranch {:>) - what a blast.



Had to take off from a grass strip after a hard all night rain on one 

occasion and it was like being on skis.  Wheels would not roll, just slid on 

the soggy turf, but fortunately the old rudder maintained controlled.  Had 

the stick back in my lap for take off to unload the nose wheel and 

acceleration was a bit slower than normal - to say  the least.  About the 

time I was considering aborting and trying later, hit a bump and found 

myself airborne in slow flight.  But, of course, once the wheels were off 

the ground the aircraft accelerate in typical RV fashion and off we went.



So hope to catch up with the gang next weekend



Ed



Ed Anderson

Rv-6A N494BW Rotary Powered

Matthews, NC

eanderson(at)carolina.rr.com

---

_________________
Ed Anderson
Rv-6A N494BW Rotary Powered
Matthews, NC
eanderson@carolina.rr.com

Steve Glasgow

Joined: 10 Jan 2006
Posts: 674

Posted: Sun Feb 19, 2006 6:39 am Post subject: Sunday

Sounds like another great RV experience.  See you next week.



Cappy

  ---

_________________
Steve Glasgow-Cappy
Cappy's Toy
RV-8 N123SG

Steve Glasgow

Joined: 10 Jan 2006
Posts: 674

Posted: Sun Feb 19, 2006 4:16 pm Post subject: Sunday

5 RV's made it to MTV today.  Very good lunch.



Cappy

_________________
Steve Glasgow-Cappy
Cappy's Toy
RV-8 N123SG

Larry Bowen

Joined: 09 Jan 2006
Posts: 802
Location: NC, USA

Posted: Sat Feb 25, 2006 8:13 pm Post subject: Sunday

Only thing I've heard is breakfast at CAE and RUQ.



-

Larry Bowen

Larry(at)BowenAero.com

http://BowenAero.com

 



[quote] --

_________________
Larry Bowen
RV-8 SOLD,
RV-7QB in progress...

tadsargent(at)bellsouth.n
Guest

Posted: Sun Feb 26, 2006 4:43 am Post subject: Sunday

Lancaster for lunch?

Tad

[quote] 

 From: "Larry Bowen" <Larry(at)bowenaero.com>

 Date: 2006/02/25 Sat PM 11:12:38 EST

 To: <rvsoutheast-list(at)matronics.com>

 Subject: RE: Sunday

 

 

 

 Only thing I've heard is breakfast at CAE and RUQ.

 

 -

 Larry Bowen

 Larry(at)BowenAero.com

 http://BowenAero.com

  

 

 > --

Steve Glasgow

Joined: 10 Jan 2006
Posts: 674

Posted: Sun Feb 26, 2006 5:54 am Post subject: Sunday

I think I will let the wind dye down a bit and fly this afternoon around 2 PM.



I put the streamlined stainless tail wheel chains on and tried it yesterday.  It seemed better than the single arm type.  Will try some more this afternoon.



Cappy

  ---

_________________
Steve Glasgow-Cappy
Cappy's Toy
RV-8 N123SG

Steve Glasgow

Joined: 10 Jan 2006
Posts: 674

Posted: Sat Mar 04, 2006 6:41 am Post subject: Sunday

Anyone have any plans for Sunday?



Cappy

_________________
Steve Glasgow-Cappy
Cappy's Toy
RV-8 N123SG

tadsargent(at)bellsouth.n
Guest

Posted: Sun Mar 05, 2006 3:50 am Post subject: Sunday

Make a suggestion.  

Tad

 	  Quote: 	
		   

 From: "Steve Glasgow" <willfly(at)carolina.rr.com>

 Date: 2006/03/04 Sat AM 09:41:29 EST

 To: "SERV" <rvsoutheast-list(at)matronics.com>

 Subject: Sunday

 

 

 

 Anyone have any plans for Sunday?

 

 Cappy

Dale Ensing

Joined: 11 Jan 2006
Posts: 571
Location: Aero Plantation Weddington NC

Posted: Sun Mar 05, 2006 4:10 am Post subject: Sunday

Completed SB on left wing tank yesterday. Need to fly today. Anything going

on?

Dale

_________________
Dale Ensing
RV-6A
Aero Plantation
Weddington NC

Display posts from previous:

	Matronics Email Lists Forum Index -> RVSouthEast-List	All times are GMT - 8 Hours Goto page 1, 2 Next
Page 1 of 2

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum