gkrysztopik(at)satx.rr.co Guest
|
Posted: Thu Aug 07, 2008 2:05 pm Post subject: oil leak |
|
|
i replaced my main seal behind the flywheel a while ago because it was
weeping more and more. i left the seal sticking out about 1/16 - 1/8"
so it wouldn't ride on the same worn spot figuring next time i'd get the
sleeve that was offered with the seal. i had about 20 hrs with no leaks
at all.
now i have some weeping oil and it's hard to track down. i took the
prop off so it wouldn't get blown around and it looks like all of the
bolts holding the drive onto the crankcase are wet. this doesn't make
sense to me. i'll have to keep tracing it. i assumed it was the same
seal but it doesn't look like it. any guesses?
thanks,
gary
| - The Matronics Stratus-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Stratus-List |
|
|
|