mppalmer(at)aol.com Guest
|
Posted: Mon Apr 22, 2013 9:29 pm Post subject: FT nose gear stop bolt |
|
|
I was doing some maintenance on our FT nose gear at about 2600 hours. I
noticed the NAS cap head bolt/screw that serves as a stop for the
swiveling gear was loose in the aluminum fork. (The hole had elongated
from being whacked by the nose gear while pushing the plane backward
into the hangar.)
In retrospect, I should have Heli-coiled the hole and simply reused the
same NAS bolt.
Instead, I went to the hardware store and got a Grade 8 coarse thread
cap head bolt.
Maybe it's because the threads aren't rolled, but the head snapped off
some time later. (Where the threads ended. Inside the fork. Rats.)
Don't know if I'll be able to go back to Plan A and use the old bolt.
Anyone been through this before and have an alternative solution for
the stop bolt?
(Have been flying without it for a hundred hours now. Don't know that
it's critical for safety, but would like to fix anyway.)
Thanks,
Mike Palmer <><
| - The Matronics Glasair-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Glasair-List |
|
|
|