Re: Kitplanes article on an Elegant LED driver

Next Msg:		Brantel		Re: Kitplanes article on an Elegant LED driver
Previous Msg:		Carlos Trigo		Garmin GTX-330 Instalation Manual
Maybe in Reply-To:		Eric M. Jones		Re: Kitplanes article on an Elegant LED driver
Next in Thread:		Brantel		Re: Kitplanes article on an Elegant LED driver

Subject:		Re: Kitplanes article on an Elegant LED driver
From:		Brantel (bchesteen@hughes.net)
Date:		Mon Sep 01 - 12:16 PM

Bob,

I am using the simple 4 wire version of the buck puck and do not intend to use
the control or reference functions but it would be great if those "could" be used
on this rig in the event someone wanted to strobe/dim/on-off control these
things for other applications in the plane.

I checked the continuity between the Vin Minus and LED minus and it does have 100%
continuity both directions (diode mode not required on meter).

I also checked the current on the input and it was 460mA @ 12vDC using a wall wart
powersupply.


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p 2004#202004