If the above items don't work, toluene or MEK will work, but they would be a
last resort item and I'd definitely test it on an inconspicuous area first.
They are pretty aggressive solvents, but are recommended for thinning 1300L,
the yellow snot adhesive you're probably dealing with.
On Fri, Nov 20, 2009 at 7:21 PM, Dick N. <horzpool@goldengate.net> wrote:
>
> I have had good luck with Goof Off from the hardware store. Also, VM&P
> Naptha works well.
> Dick N.
> ----- Original Message ----- From: "Oscar Zuniga" <taildrags@hotmail.com>
>
> To: "Pietenpol List" <pietenpol-list@matronics.com>
> Sent: Friday, November 20, 2009 3:03 PM
> Subject: removing contact cement
>
>
>
>
> Does anyone have recommendations regarding how to
> remove contact cement from painted surfaces? For
> example, if a gasket or trim comes off of an auto
> and needs to be reattached but there is contact
> cement residue (the typical yellow cement), is there
> something that will release the old cement without
> harming the paint?
>
> Most cement cans, like the Weldwood that I have,
> says to use mineral spirits for cleanup but before
> I try it I thought I'd ask. The paint is enamel.
>
> Thanks.
>
> Oscar Zuniga
> Air Camper NX41CC
> San Antonio, TX
> mailto: taildrags@hotmail.com
> website at http://www.flysquirrel.net
>
>
--
"Politics is the art of looking for trouble, finding it whether it exists or
not, diagnosing it incorrectly, and applying the wrong remedy." --British
publisher and writer Ernest Benn (1875-1954)
