Hello Jim.
I just looked at the spring in your throttle linkage and it looks to
me that this is not the original Rotax part. I would order new springs
from a Rotax dealer and see if that does not change the situation.
They look more bulk than the original and also the ones I am using
have a long straight neck on one end. Take a look.
Top left of photo. Hope you can see the long straight end of the spring.
Regards,
Johann G.
008, at 10:40 PM, Jim Feldmann wrote:
> >
>
> Just got back from the hanger and I took a picture of the linkage I
> am talking about. It seems like that is an awful lot of spring just
> to open the throttle in case of a linkage failure. Not sure I would
> like to see what happens if the linkage only fails on one side either.
>
> The main problems though are the difficulty in holding a specific
> throttle setting during approach, and the fact that the throttle
> creeps open during cruise.
>
> Jim
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p 7971#207971
>
>
> Attachments:
>
> http://forums.matronics.com//files/dscf1265_121.jpg
>
>
