Call Brett at Bonaco, he knows exactly what you need.
Bret Smith
RV-9A N16BL
Blue Ridge, GA
www.FlightInnovations.com
-----Original Message-----
From: owner-rv-list-server@matronics.com
[mailto:owner-rv-list-server@matronics.com] On Behalf Of Kelly McMullen
Sent: Tuesday, November 17, 2009 9:32 PM
To: rv-list@matronics.com
Subject: Re: Brakes
http://www.bonacoinc.com/
I believe they have kits for your RV, but the website has little info
beyond what hose and fittings they have available.
Norman Hunger wrote:
> Hi everybody, I'm poking around my long dormant resurrected kit and
> noticing the right side optional brake pedal lines are white plastic.
> Does any one sell a kit to do this with nicer lines? Can small AN
> fittings be used here?
>
> I was reading about a brake pedal improvement where the short pivot
> point bolts are replaced with AN3-60 bolts. The result is one bolt all
> the way across the bottom of the pedal instead of a single bolt on each
> side. The better alignment of the single bolt shaft reduces the
> possibility of binding and makes the pedals operate smoother. Is this
true?
>
> I also read some time back about one complaining about draggy brakes and
> the need to upgrade the springs on the master cylinders for stronger
> ones. Is this true?
>
> And what about the brakes? My Vans wheels and brakes and tires are now
> about ten years old. Is it worth while to install Grove wheels and
> brakes? Do they work better?
> http://www.groveaircraft.com/56-1a.html
>
> Who makes the best tires?
>
> Thanks for your support....
> Norman Hunger
> RV6A Delta BC
> Do not archive
> Nov 17-09 - 15
>
>
