Re: Work Bench Cover

Next Msg:		Ed Anderson		Aluminum Tubing was Brake Fire wasBrakes
Previous Msg:		larygagnon@aol.com		Re: elevator trim, manual vs electric
Maybe in Reply-To:		rveighta@comcast.net		Work Bench Cover
Next in Thread:		Bill and Tami Britton		Re: Work Bench Cover

Subject:		Re: Work Bench Cover
From:		Jim Fogarty, Lakes & Leisure Realty, Inc. (jfogarty@tds.net)
Date:		Wed Nov 18 - 1:04 PM

Walt,  I have used the light weight rubber mats you can get at Fleet 
Farm or Home Depot, however, pine table tops are just fine or whatever 
material you have available.  I'm moving my project to the hangar this 
week and making a few more tables.  Good luck!    

Jim Fogarty
RV9a Building
  ----- Original Message ----- 
  From: rveighta@comcast.net 
  To: rv-list@matronics.com 
  Sent: Wednesday, November 18, 2009 6:43 AM
  Subject: Work Bench Cover


  Guys, on some of the RV websites I've noticed work benches covered 
with some sort of protective cover, which 

  I'm assuming is there to prevent scratches on metal parts. I would 
appreciate any input as to what is used and

  where to get it. 


  Thanks,    Walt Shipley


3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D