I'm in for one
Bowman-40831
----- Original Message -----
From: Don McDonald
To: rv10-list@matronics.com
Sent: Wednesday, October 08, 2008 1:27 PM
Subject: Re: Re: Rear Heat Duct (Scat Tube) - SOLUTION
OK, guys, this is Don, the harness and headset bracket guy....
anyone interested in the perfect solution to this problem. My brother
is designing and then will make a plenim type system that will slip
right over the fuel selector valve on both sides, then convert back to
the 2" round to match up to the scat tubing. The total area will be
slightly more than the original scat.... not counting if you do it like
Van's suggest, and smash it. A little rubber on the bottom and top, and
it will be held perfectly in place. Just let me know how many would be
interested. Will have pictures of a completed part within a week or so.
Don
--- On Wed, 10/8/08, AirMike <Mikeabel@Pacbell.net> wrote:
From: AirMike <Mikeabel@Pacbell.net>
Subject: Re: Rear Heat Duct (Scat Tube)
To: rv10-list@matronics.com
Date: Wednesday, October 8, 2008, 9:49 AM
<Mikeabel@Pacbell.net>
I wound up taking Aaron's suggestion and routing the line under the fuel
valve. Worried about chafe, and took some measure to prevent it. Thanks
again to
all the great suggestions. I do not think that I could get through this
project
without this web site. Remember Matt when it is time for his annual
donation.
--------
OSH '08 or Bust (busted) be there in "09
Q/B Kit - wiring and FWF
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p 7912#207912
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
