Don - I'm interested too but will wait for pictures.
cheers,
Ron
Do not archive
________________________________
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of Don McDonald
Sent: Thursday, 9 October 2008 6:57 AM
To: rv10-list@matronics.com
Subject: Re: Re: Rear Heat Duct (Scat Tube) -
SOLUTION
OK, guys, this is Don, the harness and headset bracket guy.... anyone
interested in the perfect solution to this problem. My brother is
designing and then will make a plenim type system that will slip right
over the fuel selector valve on both sides, then convert back to the 2"
round to match up to the scat tubing. The total area will be slightly
more than the original scat.... not counting if you do it like Van's
suggest, and smash it. A little rubber on the bottom and top, and it
will be held perfectly in place. Just let me know how many would be
interested. Will have pictures of a completed part within a week or so.
Don
--- On Wed, 10/8/08, AirMike <Mikeabel@Pacbell.net> wrote:
From: AirMike <Mikeabel@Pacbell.net>
Subject: Re: Rear Heat Duct (Scat Tube)
To: rv10-list@matronics.com
Date: Wednesday, October 8, 2008, 9:49 AM
<Mikeabel@Pacbell.net>
I wound up taking Aaron's suggestion and routing the line under
the fuel
valve. Worried about chafe, and took some measure to prevent it.
Thanks again to
all the great suggestions. I do not think that I could get
through this project
without this web site. Remember Matt when it is time for his
annual donation.
--------
OSH '08 or Bust (busted) be there in "09
Q/B Kit - wiring and FWF
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p 7912#207912
3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
"Warning:
The information contained in this email and any attached files is
confidential to BAE Systems Australia. If you are not the intended
recipient, any use, disclosure or copying of this email or any
attachments is expressly prohibited. If you have received this email
in error, please notify us immediately. VIRUS: Every care has been
taken to ensure this email and its attachments are virus free,
however, any loss or damage incurred in using this email is not the
sender's responsibility. It is your responsibility to ensure virus
checks are completed before installing any data sent in this email to
your computer."
