I suggest you look at the plans and check where the reinforced areas are.
That's where you want the wing walk material. It's a guide to where your
passengers can put their weight and not damage your aircraft. The areas do
not seem to include any part of the wing tank or the fuselage fairing
forward of the main spar.
-----Original Message-----
From: owner-rv10-list-server@matronics.com
[mailto:owner-rv10-list-server@matronics.com] On Behalf Of Deems Davis
Sent: Saturday, November 22, 2008 12:55 PM
To: rv10-list@matronics.com
Subject: Re: Wing Walk Material
I was thinking about ths @ OSH and snapped a couple of pics, I've decided
NOT to use White, but to use the black. Here's a couple that I like and also
solved a question I was having about whether to cover the wing root section
as well. I still haven't decided on the material but am leaning towards the
3M
http://deemsrv10.com/album/OSHKOSH%202008/RV-10%27s/slides/DSC_0028.html
http://deemsrv10.com/album/OSHKOSH%202008/RV-10%27s/slides/DSC_0016.html
Deems Davis # 406
'Its all done....Its just not put together'
http://deemsrv10.com/
Robin Marks wrote:
>
> Dear List,
> It's time to think about wing walk material. I could go with the
> standard Vans RV-10 material or the (near) clear wing walk material
> offered by ACS. Are there any other (good) options available that are
> visually appealing and functional or does anyone have a preference on
> one material over another?
>
>
