I installed the aileron middle balance fairlead and ready to install the ou
ter aileron balance fairleads.- Per plan 6-B-22, FOUR outer aileron balan
ce fairleads are required with slotted-#20 holes in the middle.- Two ar
e installed on the forward side skins and two on back seat support (6B5-1).
- Either I am slow today (confuse?) or he people at Zenith do not deserve
a passing grade, but here are my questions:=0A=0A1.- How on earth can I
install slotted fairleads to back support without adding L-angle similar to
the middle aileron balance fairlead?- Where is the L-angle drawing?=0A2.
- What is the distance between the side skin and balance fairleads that
-attach to the back seat support?=0A3.- At the very bottom right of pla
n 6-B-22, two non-drilled 30X60mm faileads are required.- What are those
fairleads, where are they installed,-and why aren't they allocated on the
fairlead board templates?=0A4.- Six slotted aileron fairleads (four on a
ileron balance cable & two on aileron cables) have safety wires tied to ope
n slotted ends-to prevent aileron cables from "jumping" out of the slots,
and I suppose the aileron cables should not be rubbing-on the safety wir
es under normal operating condition.- So how do I orient each open slotte
d aileron fairlead to minimize aileron cables from rubbing against safety w
ires?=0A=0AThanks.=0A=0A=0A