Re: machine screws

Next Msg:		Derek Lewis		Best place to get 6061
Previous Msg:		wade jones		Re: 601XL Wing Install
Maybe in Reply-To:		Carlos Sa		machine screws
Next in Thread:		Carlos Sa		Re: machine screws

Subject:		Re: machine screws
From:		Carlos Sa (carlossa52@gmail.com)
Date:		Wed Nov 26 - 9:48 AM

Thank you all for the tips.
A correction: the head angle is 100 degrees, as can be seen in the anchor
plate drawing at http://www.aircraftspruce.com/catalog/graphics/04-01724.gif
 - not 82 degrees as I stated on my first note.


Carlos
CH601-HD, plans
slowly but surely, with emphasis on "slowly".