ones in the C90 and in the X4S/X2S agree with one another, BUT if David was
correct in thinking these wires would work the SAME as the other units then
it would work.
There is always the small caution that it might not be exactly the same
resistance selections on the C90 as on the X4S/X2S using units. For example
the X1S that was used in older units like the XK-R100 is completely
incompatible with the X2S/X4S and vice versa. (Incidentally the X2S and X4S
themselves are nearly IDENTICAL to one another and are completely
cross-compatible). Another example is the X38 from the MDX-400. Plugging
an X2S/X4S into the remote jack on the 400's tuner/pre-amp results in a
remote which works but the commands are completely messed up and not all
commands are available). This may not be the case with the C90 however, and
it may use the exact same resistance values as the X4S/X2S and it may work
out fine.
I'd suggest trying to do a little more research though. If you have an
X2S/X4S remote handy it would be especially helpful in determining how to
make the connection and if it would work 100% correctly or not.
Roland M.
Let the advanced features & services of MSN Internet Software maximize your
online time. http://click.atdmt.com/AVE/go/onm00200363ave/direct/01/
-- Please support this service by making your Contribution today! --
Return to the Matronics Email List Homepages