[ Note: This FAQ was designed to be displayed with a fixed width font such as
Courier. Proportional fonts will cause display formatting errors. ]
This FAQ can also be viewed in HTML online at the following address:
http://www.matronics.com/FAQ/XDP4000x-List.htm
**************************************************************************
******* *******
******* LIST POLICIES AND FREQUENTLY ASKED QUESTIONS *******
******* *******
**************************************************************************
PLEASE READ. This document contains XDP4000x-List policies and information
for new and old subscribers. Understanding the XDP4000x-List policies will
minimize problems for the Administrator, and will help keep the XDP4000x-List
running smoothly for all of us.
****************************************
*** How to Subscribe and Unsubscribe ***
****************************************
Simply go to the Web Page shown below and enter your email address and
select the List(s) that you wish to subscribe or unsubscribed from. You
may also use the handy "Find" function to determine the exact syntax of
your email address as it is subscribed to the List. Please see the
complete instructions at the top of the Web Page for more information.
The Subscribe/Unsubscribe web page is:
http://www.matronics.com/subscribe
Note that you will receive TWO conformation emails regarding your subsciption
process. The first verifies that your subscription/unsubsciption request
was received, and the second confirms that the process has been completed.
You should receive the first email with a few minutes of your request. The
second conformation will arrive in less that 24 hours. You cannot post
until you receive the second conformation email message.
*****************************
*** How to Post a Message ***
*****************************
Send an email message to:
xdp4000x-list@matronics.com
Your message will be redistributed to everyone currently subscribed
to the List.
*****************************************************
*** SPAM Fighter - You Must be Subscribed to Post ***
*****************************************************
When a new post is received by the system, the From: line of the message
is checked and compared against the current subscription list. If the
email address is found, the message is passed on to the List Processor.
If the email address isn't found in the current list of subscribers, it
is dumped. This serves to very effectively thwart 99% of the SPAM that
gets posted to the Lists.
Remember, however, that the syntax of your email address is very important
with regard to the configuration of your email application such as Outlook
or Eudora. For example, the following two email addresses may be
functionally equivalent, but only one would pass the Matronics Email SPAM
test depending on which was syntax was subscribed to the given List:
smith@machine.domain.com
smith@domain.com
Either email address syntax is alright, just be sure that you configure
your email application to match *exactly* the address you've subscibed to
the List.
*****************************************************************
*** Enclosures Stripped Out - Can't Get a Virus From the List ***
*****************************************************************
Any enclosures that are posted to the List will automatically be
stripped off, and ONLY the plain/text portion of the message will be
forwarded to the List.
Please configure your Email application to send Plain Text Only, and
disable any "Quoted Printable" or "HTML" encoding whenever possible.
Because enclosures are stripped out of incoming posts to the List,
the likelihood of getting a virus from the List is extremely small.
If you do receive a message that appears to be from the List, and it
does includes a virus, it is very likely that it was sent *directly*
to you from someone on the List who has a virus. This is a specific
kind of virus, and you should try to inform the sender, if possible.
The best protection against viruses is a good virus protection program
such as Norton Antivirus. State of the art in virus protection today's
world gives maximum protection with little or no negative impact on
the computer system. You can't afford to be without a good virus
protection program these days.
*******************
*** Digest Mode ***
*******************
Each day, starting at 12 midnight PST US, a new 'digest' will be started.
This digest will contain the same information that is currently appended
to the archive file. It has all of the headers except for the "From:"
and "Subject:" lines removed, and includes a message separator consisting
of a line of underscores.
Each day at 23:55 PST US, the day's messages as described above will be
combined and sent as a single message to everyone on the digest email list.
To subscribe to the digest list, use the same subscription web form
described above, and just select the Digest version of the List.
http://www.matronics.com/subscribe
Note that you *can* be subscribed to both the realtime and digest versions
of the List at the same time. This is perfectly acceptable.
Now some caveats:
* Messages sent to "xdp4000x-list-digest" will be forwarded to the standard
email list. In other words, you cannot post messages only to the
digest List.
* If you are subscribed to both the regular List and the digest List, you
will receive the realtime postings as well as the digest at the end of
the day.
* If you reply to the digest email, your message will be forwarded to the
normal list associated with the digest. Important Note: Please change
the subject line to reflect the topic of your response! Also, please
*do not include all or most of the digest in your reply*.
*****************************************
*** The "DO NOT ARCHIVE" Message Flag ***
*****************************************
At times, your message may concern something that is revelent only to a very
small number of persons or to a limited area, and you may not wish to archive
it. In such a case, simply put the following phrase anywhere in the
message:
do not archive
Your message will not be appended to the archive, but will be sent to List
email distribution as normal.
**********************************************
***** READ THIS - Automatic Unsubscribes *****
**********************************************
Note that if your email address begins to cause problems such as bounced
email, mailbox full, or any other errors, your address will be promptly
removed from the List. If you discover that you are no longer receiving
messages from the XDP4000x-List, go to the following Web page, and look
for your email address and a possible reason for your removal.
The Matronics Email List uses utility called the "Email Weasel" that
automatically looks though the day's bounced email for addresses that
caused problems due to common things like "user unknown", "mailbox full",
etc. If the Email Weasel removes your email address from the Lists you
will find record of it at the following URL:
http://www.matronics.com/unsubscribed
If the problem listed on the web site above has been resolved, please feel
free to resubscribe to the Lists of your choice.
*******************************
*** List Member Information ***
*******************************
If you have not done so already, please email me your phone numbers and
paper mail address in the following format:
smith@somehost.com
Joe Smith
123 Airport Lane
Tower, CA 91234-1234
098-765-1234 w
123-456-7890 h
Please forward this information to the following email address:
request@matronics.com
I have a file of such things, that I typically use to contact you when
there are problems with your email address. The information will NOT
be used for any other commercial purpose.
****************************************
*** Realtime Web Email List Browsing ***
****************************************
Recent messages posted to the XDP4000x-List are also made available on
the Web for realtime browsing. Seven days worth of back postings are
available with this feature. The messages can be sorted by Subject,
Author, Date, or Message Thread. The Realtime List Browser indexes are
updated twice per hour at xx:15 and xx:45. You can also reply to a message
or start a new message directly from the List Browser Interface (coming soon).
You do not have to be subscribed to the given list to use the List
Browser Interface in view-mode.
http://www.matronics.com/browselist/xdp4000x-list
*********************
*** List Archives ***
*********************
A file containing of all of the previous postings to the XDP4000x-List is
available on line. The archive file information is available via the
Web and FTP in a number of forms. Each are briefly described below:
XDP4000x-List.FAQ
- Latest version of the XDP4000x-List
Frequently Asked Question page
(this document).
XDP4000x-Archive.digest.complete
- Complete file with most of the
email header info removed and
page breaks inserted between
messages.
XDP4000x-Archive.digest.vol-??
- Same as the file above, but broken
up into small sections that can
more easily handled.
XDP4000x-Archive.digest.complete.zip
- Same as the
XDP4000x-Archive.digest.complete
file above, but in PKZIP format.
Use "binary" data transfer methods.
XDP4000x-Archive.digest.complete.Z
- Same as the
XDP4000x-Archive.digest.complete
file above, but in UNIX compress
format. Use "binary" data transfer
methods.
Download Via FTP
----------------
The archive file is available via anonymous FTP from ftp.matronics.com
in the "/pub/Archives" directory. It is updated daily and can be found in
a number of formats as described above. (All filenames are case sensitive.)
ftp://ftp.matronics.com/pub/Archives
Download Via Web
----------------
The archives are also available via a web listing. These can be found
toward the bottom of the following web page:
http://www.matronics.com/archives
******************************************
*** Complete List Web Archive Browsing ***
******************************************
All messages posted to the XDP4000x-List are also available using the
Email List Archive Browsing feature. With this utility, all messages
in the List are indexed, and individual sub-archives can be browsed.
http://www.matronics.com/archive/archive-index.cgi?XDP4000x
*****************************************
**** High-Speed Archive Search Engine ***
*****************************************
You can use the custom, high-performance Matronics Email List Search Engine
to quickly locate and browse any messages that have been posted to the
List. The Engine allows the user to easily search any of the currently
available List archives.
http://www.matronics.com/search
****************************
*** File and Photo Share ***
****************************
With the Matronics Email List File and Photo Share you can share pictures
and other data with members of the List without having to forward a
copy of it to everyone. To share your Files and Photos, simply email
them to:
pictures@matronics.com
!! ==> Please including the following information with each submission:
1) Email Lists that they are related to.
2) Your Full Name.
3) Your Email Address.
4) One line Subject description.
5) Multi-line, multi-paragraph description of topic.
6-x) One-line Description of each photo or file
Prior to public availability of the files and photos, each will be scanned
for viruses. Please also note that the process of making the files and
photos available on the web site is a pseudo-manual process, and I try to
process them every few days.
Following the availability of the new Photoshare, an email message will be
sent to the Email Lists enumerated in 1) above indicating that the new
Share is available and what the direct URL to it is.
For a current list of available Photoshares, have a look at the Main
Index Page:
http://www.matronics.com/photoshare
**************************
*** List Archive CDROM ***
**************************
A complete Matronics Email List Archive CD is available that contains
all of the archives since the beginning of each of the Lists. The archives
for all of the Lists are included on the CD along with a freeware search
engine written by a list member. The CD is burned the day you order it
and will contain archive received up to the last minute. They make
great gifts!
http://www.matronics.com/ArchiveCDROM
**********************************
*** List Support Contributions ***
**********************************
The Matronics Lists are run *completely* through the support of it members.
You won't find any PopAds, flashing Banner ads, or any other form of
annoying commercialism on either the Email Messages or the List web pages
associated with the Matronics Email Lists. Every year during November
I run a low-key, low-pressure "Fund Raiser" where, throughout the month,
I ask List members to make a Contribution in any amount with which they
are comfortable.
I will often offer free gifts with certain contribution levels during the
Fund Raiser to increase the participation. The gifts are usually donated
by companies that are themselves List members.
Your Contributions go directly to supporting the operation of the Lists
including the high-speed business-class Internet connection, server
system hardware and software upgrades, and to partially offset the many
many hours I spend running, maintaining, upgrading, and developing the
variety of services found here.
Generally Contributions range from $20 to $100 and are completely voluntary
and non-compulsory. I ask only that if person enjoys the Lists and obtains
value from them, that they make a Contribution of equal magnitude.
Contributions are accepted throughout the year, and if you've just
subscribed, feel free to make a Contribution when you settled in.
The website for making SSL Secure Contributions is listed below. There are
a variety of payment methods including Visa and MasterCard, PayPal, and
sending a personal check.
If you enjoy and value the List, won't you make a Contribution today to
support its continued operation?
http://www.matronics.com/contributions
Thank you!
Matt Dralle
Email List Administrator
******************************************************************************
XDP4000x-List Usage Guidelines
******************************************************************************
The following details the official Usage Guidelines for the XDP4000x-List.
You are encouraged to read it carefully, and to abide by the rules therein.
Failure to use the XDP4000x-List in the manner described below may result
in the removal of the subscribers from the List.
XDP4000x-List Policy Statement
The purpose of the XDP4000x-List is to provide a forum of discussion for
things related to this particular discussion group. The List's goals
are to serve as an information resource to its members; to deliver
high-quality content; to provide moral support; to foster camaraderie
among its members; and to support safe operation. Reaching these goals
requires the participation and cooperation of each and every member of
the List. To this end, the following guidelines have been established:
- Please keep all posts related to the List at some level. Do not submit
posts concerning computer viruses, urban legends, random humor, long
lost buddies' phone numbers, etc. etc.
- THINK carefully before you write. Ask yourself if your post will be
relevant to everyone. If you have to wonder about that, DON'T send it.
- Remember that your post will be included for posterity in an archive
that is growing in size at a extraordinary rate. Try to be concise and
terse in your posts. Avoid overly wordy and lengthy posts and
responses.
- Keep your signature brief. Please include your name, email address,
aircraft type/tail number, and geographic location. A short line
about where you are in the building process is also nice. Avoid
bulky signatures with character graphics; they consume unnecessary
space in the archive.
- DON'T post requests to the List for information when that info is
easily obtainable from other widely available sources. Consult the
web page or FAQ first.
- If you want to respond to a post, DO keep the "Subject:" line of
your response the same as that of the original post. This makes it
easy to find threads in the archive.
- When responding, NEVER quote the *entire* original post in your
response. DO use lines from the original post to help "tune in" the
reader to the topic at hand, but be selective. The impact that
quoting the entire original post has on the size of the archive
can not be overstated!
- When the poster asks you to respond to him/her personally, DO NOT
then go ahead and reply to the List. Be aware that clicking the
"reply" button on your mail package does not necessarily send your
response to the original poster. You might have to actively address
your response with the original poster's email address.
- DO NOT use the List to respond to a post unless you have something
to add that is relevant and has a broad appeal. "Way to go!", "I
agree", and "Congratulations" are all responses that are better sent
to the original poster directly, rather than to the List at large.
- When responding to others' posts, avoid the feeling that you need to
comment on every last point in their posts, unless you can truly
contribute something valuable.
- Feel free to disagree with other viewpoints, BUT keep your tone
polite and respectful. Don't make snide comments, personally attack
other listers, or take the moral high ground on an obviously
controversial issue. This will only cause a pointless debate that
will hurt feelings, waste bandwidth and resolve nothing.
-------