AeroElectric-List Digest Archive

Sun 11/26/17


Total Messages Posted: 5



Today's Message Index:
----------------------
 
     0. 07:30 AM - Just A Few Days Left... (Matt Dralle)
     1. 05:11 AM - Re: 1A Slow Blow Fuse (Art Zemon)
     2. 07:35 AM - Re: 1A Slow Blow Fuse (user9253)
     3. 10:29 AM - Re: 1A Slow Blow Fuse (Robert L. Nuckolls, III)
     4. 08:42 PM - Stratux position (petertohen)
 
 
 


Message 0


  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:30:53 AM PST US
    From: Matt Dralle <dralle@matronics.com>
    Subject: Just A Few Days Left...
    Dear Listers, There are just a few days left for this year's List Fund Raiser. If you've been putting off making a Contribution until the last minute, well, this is it! The last minute, that is... :-) There are some GREAT new gift selections to choose from this year. I personally want at least three of them! There's probably something you can't live without too! And, best of all it supports your Lists! Please remember that there isn't any sort of commercial advertising on the Lists and the *only* means of keeping these Lists running is through your Contributions during this Fund Raiser. Let's make this a "Black Friday" for the Lists! Please make a Contribution today! http://www.matronics.com/contribution Or, drop a personal check in the mail to: Matt Dralle / Matronics 581 Jeannie Way Livermore CA 94550 Thank you! Matt Dralle Matronics Email List Administrator


    Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:11:15 AM PST US
    From: Art Zemon <art@zemon.name>
    Subject: Re: 1A Slow Blow Fuse
    =8B On Sat, Nov 25, 2017 at 11:28 PM, Charlie England <ceengland7@gmail.com> wrote: > 1A slow blow sounds oxymoronic to me... > to me too but there are lots of 'em available... https://www.digikey.com/product-detail/en/littelfuse-inc/0313001.HXP/F2543- ND/777259 Cheers, -- Art Z. =8B -- https://CheerfulCurmudgeon.com/ *"If I am not for myself, who is for me? And if I am only for myself, what am I? And if not now, when?" Hillel*


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:35:58 AM PST US
    Subject: Re: 1A Slow Blow Fuse
    From: "user9253" <fransew@gmail.com>
    ATC or ATO fuses of 3 amps and larger are available with an LED that glows after the fuse blows. -------- Joe Gores Read this topic online here: http://forums.matronics.com/viewtopic.php?p=475624#475624


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:29:22 AM PST US
    From: "Robert L. Nuckolls, III" <nuckolls.bob@aeroelectric.com>
    Subject: Re: 1A Slow Blow Fuse
    At 09:29 PM 11/25/2017, you wrote: >Bob, > >In a recent message, you wrote: " I would avoid using fuses lower >than 3A for mechanical robustness concerns." > >I am installing an MGL backup ASI+altimeter and the installation >instructions call for a 1A slow blow fuse. I bought a glass tube >fuse and an inline holder. > >I do remember what you have written (many times!) about fuses >protecting the wires but opted to follow the manufacturer's >instructions. I would love to hear your thoughts about this situation. Generally speaking, it's never wrong to follow the instructions. I'm always curious as to the design decisions that prompt such requirements from manufacturers . . . but one almost never gets to talk to the guy who did it. From the airframe side of the fence, mechanical robustness, reduction in weight, cost and parts count and designing for failure tolerance germinated a host of design rules that NEVER speak to what goes on inside a purchased black box. Internal workings are the responsibility of the product's designer. I can tell you that any supplier asking for a 1A slow blow fuse to protect an input to a device offered for a Beech product would be queried in detail. . . . we probably would have agreed on a miniature, 2.5 or 5A breaker instead. Bob . . .


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:42:55 PM PST US
    Subject: Stratux position
    From: "petertohen" <dhctvien3@gmail.com>
    Hey Ya'll I'm looking into ditching my Garmin 510 and using only ForeFlight with the Stratux for navigation. Currently I'm feeding my 406 ELT position data from the Garmin but want to retain that ability with the IPad/ForeFlight/Stratux set up. Has anyone done this? Anyone know the exact pins on the Sratux to pull GPS position from to make the 406 ELT happy? I ordered the Stratux already built so I probably need to be spoon fed....... http://www.matronics.com/skycomm/ Read this topic online here: http://forums.matronics.com/viewtopic.php?p=475706#475706




    Other Matronics Email List Services

  • Post A New Message
  •   aeroelectric-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/AeroElectric-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/aeroelectric-list
  • Browse AeroElectric-List Digests
  •   http://www.matronics.com/digest/aeroelectric-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --