Today's Message Index:
----------------------
1. 06:00 AM - Re: Pulsar Band Brakes (mike mccann)
2. 08:58 AM - Re: Pulsar Band Brakes (George Gennuso)
3. 07:10 PM - Re: Pulsar Band Brakes (Rex Miller)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Pulsar Band Brakes |
Keith, If you no longer need them, I'd be very happy to pay you for the
original bands. I don't have my original bands (wish I did) and would be
happy to see about having the bands re-lined.
Best,
Mike
On Tue, Jun 7, 2011 at 10:44 PM, Keith Palmer <kdpalmer@mweb.co.za> wrote:
> *Mike,*
> * I have a pair of original bands in very good condition, the
> friction material is worn out so will need rebonding with new linings.*
> *Keith*
>
> ----- Original Message -----
> *From:* mike mccann <mvmccann@gmail.com>
> *To:* pulsar-list@matronics.com
> *Sent:* Wednesday, June 08, 2011 6:24 AM
> *Subject:* Re: Pulsar-List: Pulsar Band Brakes
>
> Mark, if you can source a supplier that sells the band brakes with a
> slightly larger diameter than those sold at Aircraft Spruce, it would be
> good. The original Aero Designs band brakes were slightly larger and the
> tabs were slightly longer than found available today. The result is a less
> than ideal fit. I've looked many places but never found an ideal source for
> the band brakes (even though I still like using band brakes for the 582).
>
> Best,
>
> Mike McCann
> Pulsar 1 - 582.
>
>
> On Tue, Jun 7, 2011 at 2:10 PM, DON SURRATT <surratt_do@msn.com> wrote:
>
>> You might try Norther tool. I have seen in their go-cart parts area
>> band brakes that look like ours, only I have not measured the exact diameter
>> to be sure they match what those of us that have early kits have.
>> Don Surratt
>>
>> ------------------------------
>> Date: Wed, 1 Jun 2011 08:33:58 -0400
>> Subject: Pulsar-List: Pulsar Band Brakes
>> From: saafbusiness@gmail.com
>> To: Pulsar-List@matronics.com
>>
>> Does anyone know where to get replacement band brakes for the original
>> areodesigns version ....circa 1995 ?
>>
>> Thanks
>>
>> --
>> Mark L. Fox
>> www.slyasafox.com
>> info@slyasafox.com
>> 1-321-626-4786
>> www.NestEggSoftware.com <http://www.nesteggsoftware.com/>
>> www.DaVinciandthe40answers.com <http://www.davinciandthe40answers.com/>
>> www.TangentTime.com <http://www.tangenttime.com/>
>> Skype: marklfox
>>
>> Creative Thinking Workshops
>> Systematic Idea Generation
>> Word of Mouth Marketing
>> da Vinci's and the 40 Answers
>> The One Page Proposal
>>
>> *
>>
>> target=_blank>http://www.matronics.com/Navigator?Pulsar-List
>> ttp://forums.matronics.com
>> =_blank>http://www.matronics.com/contribution
>> *
>>
>> *
>>
>> arget="_blank">http://www.matronics.com/Navigator?Pulsar-List
>>
>> ttp://forums.matronics.com
>> _blank">http://www.matronics.com/contribution
>> *
>>
>>
> *
>
> href="http://www.matronics.com/Navigator?Pulsar-List">http://www.matronhref="http://forums.matronics.com">http://forums.matronics.com
>
> href="http://www.matronics.com/contribution">http://www.matronics.com/c
> *
>
> *
>
>
> *
>
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Pulsar Band Brakes |
You might try this site=0A=0Ahttp://www.azusaeng.com/brakes/bandbrk.html=0A
=0AI found that if I paid close attention to the alignment of the cable att
aching =0Ato the band brake and made sure that it pulled straight and not s
lightly to =0Aeithor side that it eliminated the squeaking, grabbiness and
chatter.- I also =0Aused disk break quiet spray on the inside of the drum
.- My brakes are smooth and =0Aquiet and hold the plane at full power.-
But, I do have fade after a good hard =0Astop, so I use them sparingly.=0A
=0AGeorge=0A=0A=0A=0A=0A________________________________=0AFrom: mike mccan
n <mvmccann@gmail.com>=0ATo: pulsar-list@matronics.com=0ASent: Tue, June 7,
2011 9:24:06 PM=0ASubject: Re: Pulsar-List: Pulsar Band Brakes=0A=0A=0AMar
k, if you can source a supplier that sells the band brakes with a slightly
=0Alarger diameter than those sold at Aircraft Spruce, it would be good.-
The =0Aoriginal Aero Designs band brakes were slightly larger and the tabs
were =0Aslightly longer than found available today.- The result is a les
s than ideal =0Afit.- I've looked many places but never found an ideal so
urce for the band =0Abrakes (even though I still like using band brakes for
the 582).=0A=0ABest, =0A=0AMike McCann=0APulsar 1 - 582.=0A=0A=0A-=0AOn
Tue, Jun 7, 2011 at 2:10 PM, DON SURRATT <surratt_do@msn.com> wrote:=0A=0AY
ou might try Norther tool.- I have seen-in their go-cart parts area ban
d brakes =0Athat look like ours, only I have not measured the exact diamete
r to be sure they =0Amatch-what those of us that have early kits have.=0A
>Don Surratt=0A>-=0A>________________________________=0ADate: Wed, 1 Jun
2011 08:33:58 -0400=0A>Subject: Pulsar-List: Pulsar Band Brakes=0A>From: sa
afbusiness@gmail.com=0A>To: Pulsar-List@matronics.com=0A>=0A>=0A>Does anyon
e know where to get replacement band brakes for the original =0A>areodesign
s version ....circa 1995 ?=0A>=0A>Thanks=0A>=0A>-- =0A>=0A>Mark L. Fox=0A>w
ww.slyasafox.com=0A>info@slyasafox.com=0A>1-321-626-4786=0A>www.NestEggSoft
ware.com =0A>www.DaVinciandthe40answers.com =0A>www.TangentTime.com =0A>Sky
pe: marklfox=0A>=0A>Creative Thinking Workshops=0A>Systematic Idea Generati
on=0A>Word of Mouth Marketing=0A>da Vinci's and the 40 Answers=0A>The One P
age Proposal=0A>=0A> target=_blank>http://www.matronics.com/Navigator
?Pulsar-List =0A>ttp://forums.matronics.com =_blank>http://www.matronic
s.com/contribution =0A>=0A> arget="_blank">http://www.matronics.com
/Navigator?Pulsar-List =0A>ttp://forums.matronics.com _blank">http://www.
========= =0A
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Pulsar Band Brakes |
Also try www.tracyobien.com for all kind of brake products, Rex
-----Original Message-----
From: George Gennuso <pulsar1@sbcglobal.net>
Sent: Wed, Jun 8, 2011 5:58 am
Subject: Re: Pulsar-List: Pulsar Band Brakes
You might try this site
http://www.azusaeng.com/brakes/bandbrk.html
I found that if I paid close attention to the alignment of the cable attach
ing to the band brake and made sure that it pulled straight and not slightl
y to eithor side that it eliminated the squeaking, grabbiness and chatter.
I also used disk break quiet spray on the inside of the drum. My brakes a
re smooth and quiet and hold the plane at full power. But, I do have fade
after a good hard stop, so I use them sparingly.
George
From: mike mccann <mvmccann@gmail.com>
Sent: Tue, June 7, 2011 9:24:06 PM
Subject: Re: Pulsar-List: Pulsar Band Brakes
Mark, if you can source a supplier that sells the band brakes with a slight
ly larger diameter than those sold at Aircraft Spruce, it would be good. T
he original Aero Designs band brakes were slightly larger and the tabs were
slightly longer than found available today. The result is a less than ide
al fit. I've looked many places but never found an ideal source for the ba
nd brakes (even though I still like using band brakes for the 582).
Best,
Mike McCann
Pulsar 1 - 582.
On Tue, Jun 7, 2011 at 2:10 PM, DON SURRATT <surratt_do@msn.com> wrote:
You might try Norther tool. I have seen in their go-cart parts area band b
rakes that look like ours, only I have not measured the exact diameter to b
e sure they match what those of us that have early kits have.
Don Surratt
Subject: Pulsar-List: Pulsar Band Brakes
From: saafbusiness@gmail.com
Does anyone know where to get replacement band brakes for the original areo
designs version ....circa 1995 ?
Thanks
--
Mark L. Fox
www.slyasafox.com
info@slyasafox.com
1-321-626-4786
www.NestEggSoftware.com
www.DaVinciandthe40answers.com
www.TangentTime.com
Skype: marklfox
Creative Thinking Workshops
Systematic Idea Generation
Word of Mouth Marketing
da Vinci's and the 40 Answers
The One Page Proposal
target=_blank>http://www.matronics.com/Navigator?Pulsar-List ttp://
forums.matronics.com =_blank>http://www.matronics.com/contribution
arget="_blank">http://www.matronics.com/Navigator?Pulsar-List
ttp://forums.matronics.com _blank">http://www.matronics.com/contribution
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|