Today's Message Index:
----------------------
1. 03:39 AM - 912 Plug Caps and carb mounts (Barry J Edwards)
2. 04:18 AM - Re: 912 Plug Caps and carb mounts (CYard52306@aol.com)
3. 04:20 AM - Re: 912 Plug Caps and carb mounts (Keith Palmer)
4. 04:42 AM - Re: 912 Plug Caps and carb mounts (Barry J Edwards)
5. 06:18 AM - Re: 912 Plug Caps and carb mounts (Esa Lehto)
6. 06:53 AM - Re: 912 Plug Caps and carb mounts (Keith Palmer)
7. 06:59 AM - Re: 912 Plug Caps and carb mounts (Keith Palmer)
8. 09:24 AM - Re: 912 Plug Caps and carb mounts (Dean Rausch)
9. 12:17 PM - Re: 912 Plug Caps and carb mounts (Brian Anderson)
10. 03:54 PM - Re: Pulsar-List Digest: 2 Msgs - 09/02/12 (Chuck Stroh)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | 912 Plug Caps and carb mounts |
Hi all,
I need to get a set of 912 plug caps but they cost =C2=A335.00 EACH in
the UK from the Rotax agent. I think I asked this question a couple of
years ago and someone kindly put me in touch with a company I think in
NZ that could do them for a more realistic price, but I=99ve lost
all the details of who they were.
Has anyone used the carb mount rubbers from this company in the US?
http://www.jbmindustries.com/912socket.html
Again, the original Rotax part is half the price of a new engine so I
might be interested in buying some of these parts. It would be good to
know if anyone has any experience of them.
Thanks all,
Barry
G-XPXP 912 Taildragger UK 1030hrs
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: 912 Plug Caps and carb mounts |
Barry
Do you have automotive plugs or the original aircraft with aircraft plugs.
Regards Cy g-plsa 912
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: 912 Plug Caps and carb mounts |
Barry,
The Bing Carb Mount Rubbers are BMW R100RS motor cycle rubber
mounts, the spark plug caps find a Local dealer that supplies the
smaller size plugs they should have suppressed caps. When you live in
Africa you learn to improvise.
Keith
----- Original Message -----
From: Barry J Edwards
To: Pulsar Builders
Sent: Monday, September 03, 2012 3:34 AM
Subject: Pulsar-List: 912 Plug Caps and carb mounts
Hi all,
I need to get a set of 912 plug caps but they cost =C2=A335.00 EACH in
the UK from the Rotax agent. I think I asked this question a couple of
years ago and someone kindly put me in touch with a company I think in
NZ that could do them for a more realistic price, but I=99ve lost
all the details of who they were.
Has anyone used the carb mount rubbers from this company in the US?
http://www.jbmindustries.com/912socket.html
Again, the original Rotax part is half the price of a new engine so I
might be interested in buying some of these parts. It would be good to
know if anyone has any experience of them.
Thanks all,
Barry
G-XPXP 912 Taildragger UK 1030hrs
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: 912 Plug Caps and carb mounts |
Keith,
When you live in the UK everyone tries to stop you improvising if it
costs them a sale! There is no non Rotax supply available of the carb
mounts that I have been able to find in the UK and nor are there any
plug caps that match the originals. I=99ve found some similar ones
but they have a 90 degree bend and don=99t fit on the lower plugs
at all well.
Cy, I=99m using some originals and some
=98improvised=99 ones but I want to fit all
=98original=99 types if I can buy at a sensible price!
Barry
From: Keith Palmer
Sent: Monday, September 03, 2012 12:19 PM
Subject: Re: Pulsar-List: 912 Plug Caps and carb mounts
Barry,
The Bing Carb Mount Rubbers are BMW R100RS motor cycle rubber
mounts, the spark plug caps find a Local dealer that supplies the
smaller size plugs they should have suppressed caps. When you live in
Africa you learn to improvise.
Keith
----- Original Message -----
From: Barry J Edwards
To: Pulsar Builders
Sent: Monday, September 03, 2012 3:34 AM
Subject: Pulsar-List: 912 Plug Caps and carb mounts
Hi all,
I need to get a set of 912 plug caps but they cost =C2=A335.00 EACH in
the UK from the Rotax agent. I think I asked this question a couple of
years ago and someone kindly put me in touch with a company I think in
NZ that could do them for a more realistic price, but I=99ve lost
all the details of who they were.
Has anyone used the carb mount rubbers from this company in the US?
http://www.jbmindustries.com/912socket.html
Again, the original Rotax part is half the price of a new engine so I
might be interested in buying some of these parts. It would be good to
know if anyone has any experience of them.
Thanks all,
Barry
G-XPXP 912 Taildragger UK 1030hrs
href="http://www.matronics.com/Navigator?Pulsar-List">http://www.matron
href="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/c
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: 912 Plug Caps and carb mounts |
Hi,=0A=C2-=0ADoes anyone=C2-have BMW part number for carb mounts availa
ble?=0A=C2-=0AEsa=0A=0A=0A________________________________=0AFrom: Barry
J Edwards <barryjedwards@lineone.net>=0ATo: pulsar-list@matronics.com =0ASe
nt: Monday, September 3, 2012 4:41 AM=0ASubject: Re: Pulsar-List: 912 Plug
Caps and carb mounts=0A=0A=0AKeith,=0A=0AWhen you live in the UK everyone t
ries to stop you improvising if it costs them a sale! There is no non Rotax
supply available of the carb mounts that I have been able to find in the U
K and nor are there any plug caps that match the originals. I=99ve fo
und some similar ones but they have a 90 degree bend and don=99t fit
on the lower plugs at all well.=0A=0ACy, I=99m using some originals a
nd some =98improvised=99 ones but I want to fit all =98or
iginal=99 types if I can buy at a sensible price!=0A=0ABarry=C2-=0A
From: Keith Palmer =0ASent: Monday, September 03, 2012 12:19 PM=0ATo: pulsa
r-list@matronics.com =0ASubject: Re: Pulsar-List: 912 Plug Caps and carb mo
unts=0ABarry,=0A=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2
- The Bing Carb Mount Rubbers are BMW R100RS motor cycle rubber mounts, t
he spark plug caps find a Local dealer that supplies the smaller size plugs
they should have suppressed caps. When you live in Africa you learn to imp
rovise.=0A=0AKeith=C2-=0A----- Original Message ----- =0A>From: Barry J E
dwards =0A>To: Pulsar Builders =0A>Sent: Monday, September 03, 2012 3:34 AM
=0A>Subject: Pulsar-List: 912 Plug Caps and carb mounts=0A>=0A>Hi all,=0A>
=0A>I need to get a set of 912 plug caps but they cost =C2=A335.00 EACH in
the UK from the Rotax agent. I think I asked this question a couple of year
s ago and someone kindly put me in touch with a company I think in NZ that
could do them for a more realistic price, but I=99ve lost all the det
ails of who they were.=0A>=0A>Has anyone used the carb mount rubbers from t
his company in the US?=0A>http://www.jbmindustries.com/912socket.html=0A>
=0A>Again, the original Rotax part is half the price of a new engine so I m
ight be interested in buying some of these parts. It would be good to know
if anyone has any experience of them.=0A>=0A>Thanks all,=0A>=0A>Barry=0A>G-
XPXP 912 Taildragger UK 1030hrs=0A>href="http://www.matronics.com/Navigat
or?Pulsar-List">http://www.matronhref="http://forums.matronics.com">http:
//forums.matronics.comhref="http://www.matronics.com/contribution">htt
p://www.matronics.com/c =0Ahref="http://www.matronics.com/Navigator?Pulsa
r-List">http://www.matronhref="http://forums.matronics.com">http://forums
.matronics.comhref="http://www.matronics.com/contribution">http://www.
====================
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: 912 Plug Caps and carb mounts |
Esa,
They are standard on the older Boxer type bikes, take your sample
to the agents to check.
----- Original Message -----
From: Esa Lehto
To: pulsar-list@matronics.com
Sent: Monday, September 03, 2012 6:17 AM
Subject: Re: Pulsar-List: 912 Plug Caps and carb mounts
Hi,
Does anyone have BMW part number for carb mounts available?
Esa
From: Barry J Edwards <barryjedwards@lineone.net>
To: pulsar-list@matronics.com
Sent: Monday, September 3, 2012 4:41 AM
Subject: Re: Pulsar-List: 912 Plug Caps and carb mounts
Keith,
When you live in the UK everyone tries to stop you improvising if it
costs them a sale! There is no non Rotax supply available of the carb
mounts that I have been able to find in the UK and nor are there any
plug caps that match the originals. I=99ve found some similar ones
but they have a 90 degree bend and don=99t fit on the lower plugs
at all well.
Cy, I=99m using some originals and some
=98improvised=99 ones but I want to fit all
=98original=99 types if I can buy at a sensible price!
Barry
From: Keith Palmer
Sent: Monday, September 03, 2012 12:19 PM
To: pulsar-list@matronics.com
Subject: Re: Pulsar-List: 912 Plug Caps and carb mounts
Barry,
The Bing Carb Mount Rubbers are BMW R100RS motor cycle
rubber mounts, the spark plug caps find a Local dealer that supplies the
smaller size plugs they should have suppressed caps. When you live in
Africa you learn to improvise.
Keith
----- Original Message -----
From: Barry J Edwards
To: Pulsar Builders
Sent: Monday, September 03, 2012 3:34 AM
Subject: Pulsar-List: 912 Plug Caps and carb mounts
Hi all,
I need to get a set of 912 plug caps but they cost =C2=A335.00 EACH
in the UK from the Rotax agent. I think I asked this question a couple
of years ago and someone kindly put me in touch with a company I think
in NZ that could do them for a more realistic price, but I=99ve
lost all the details of who they were.
Has anyone used the carb mount rubbers from this company in the US?
http://www.jbmindustries.com/912socket.html
Again, the original Rotax part is half the price of a new engine so
I might be interested in buying some of these parts. It would be good to
know if anyone has any experience of them.
Thanks all,
Barry
G-XPXP 912 Taildragger UK 1030hrs
href="http://www.matronics.com/Navigator?Pulsar-List">http://www.matron
href="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/c
href="http://www.matronics.com/Navigator?Pulsar-List">http://www.matron
href="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/c
el=nofollow
target=_blank>http://www.matronics.com/Navigator?Pulsar-List
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: 912 Plug Caps and carb mounts |
Bernie,
Didn't you buy BMW Carbs mounts when you broke down that time
?.
Please confirm that they worked Okay ?
Keith
----- Original Message -----
From: Esa Lehto
To: pulsar-list@matronics.com
Sent: Monday, September 03, 2012 6:17 AM
Subject: Re: Pulsar-List: 912 Plug Caps and carb mounts
Hi,
Does anyone have BMW part number for carb mounts available?
Esa
From: Barry J Edwards <barryjedwards@lineone.net>
To: pulsar-list@matronics.com
Sent: Monday, September 3, 2012 4:41 AM
Subject: Re: Pulsar-List: 912 Plug Caps and carb mounts
Keith,
When you live in the UK everyone tries to stop you improvising if it
costs them a sale! There is no non Rotax supply available of the carb
mounts that I have been able to find in the UK and nor are there any
plug caps that match the originals. I=99ve found some similar ones
but they have a 90 degree bend and don=99t fit on the lower plugs
at all well.
Cy, I=99m using some originals and some
=98improvised=99 ones but I want to fit all
=98original=99 types if I can buy at a sensible price!
Barry
From: Keith Palmer
Sent: Monday, September 03, 2012 12:19 PM
To: pulsar-list@matronics.com
Subject: Re: Pulsar-List: 912 Plug Caps and carb mounts
Barry,
The Bing Carb Mount Rubbers are BMW R100RS motor cycle
rubber mounts, the spark plug caps find a Local dealer that supplies the
smaller size plugs they should have suppressed caps. When you live in
Africa you learn to improvise.
Keith
----- Original Message -----
From: Barry J Edwards
To: Pulsar Builders
Sent: Monday, September 03, 2012 3:34 AM
Subject: Pulsar-List: 912 Plug Caps and carb mounts
Hi all,
I need to get a set of 912 plug caps but they cost =C2=A335.00 EACH
in the UK from the Rotax agent. I think I asked this question a couple
of years ago and someone kindly put me in touch with a company I think
in NZ that could do them for a more realistic price, but I=99ve
lost all the details of who they were.
Has anyone used the carb mount rubbers from this company in the US?
http://www.jbmindustries.com/912socket.html
Again, the original Rotax part is half the price of a new engine so
I might be interested in buying some of these parts. It would be good to
know if anyone has any experience of them.
Thanks all,
Barry
G-XPXP 912 Taildragger UK 1030hrs
href="http://www.matronics.com/Navigator?Pulsar-List">http://www.matron
href="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/c
href="http://www.matronics.com/Navigator?Pulsar-List">http://www.matron
href="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/c
el=nofollow
target=_blank>http://www.matronics.com/Navigator?Pulsar-List
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: 912 Plug Caps and carb mounts |
Barry,
I have used these carb mounts from this company. The mount is very well
made, looks better than the original Rotax mount but I suppose only time
will tell how they hold up. Don't know the difference in cost from the
BMW part.
Dean
On Sep 3, 2012, at 5:34 AM, Barry J Edwards wrote:
Hi all,
I need to get a set of 912 plug caps but they cost =A335.00 EACH in the
UK from the Rotax agent. I think I asked this question a couple of years
ago and someone kindly put me in touch with a company I think in NZ
that could do them for a more realistic price, but I=92ve lost all the
details of who they were.
Has anyone used the carb mount rubbers from this company in the US?
http://www.jbmindustries.com/912socket.html
Again, the original Rotax part is half the price of a new engine so I
might be interested in buying some of these parts. It would be good to
know if anyone has any experience of them.
Thanks all,
Barry
G-XPXP 912 Taildragger UK 1030hrs
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: 912 Plug Caps and carb mounts |
Barry,
I got a plug cap [identical, I think it was Bosch] from a local
motorcycle dealer at a very reasonable price. All mine are 90 deg caps
with a suppressor resistor built in.
I also replaced the carb sockets some time back because the originals
had cracks inside. The cracks were not visible until the socket was
removed, but it would not have been a fun day if they cracked all the
way through. The original sockets were rather soft and flexible. I
bought the replacements from the local Rotax agent, and I thought that
the price was acceptable. Well, at that time I didn't know that there
might have been other possibilities anyhow. The new sockets were much
harder rubber, and much less flexible. Supposed to last a deal longer
and so far they are OK.
Brian
On 3/09/2012, at 10:34 PM, Barry J Edwards <barryjedwards@lineone.net>
wrote:
> Hi all,
>
> I need to get a set of 912 plug caps but they cost =A335.00 EACH in
the UK from the Rotax agent. I think I asked this question a couple of
years ago and someone kindly put me in touch with a company I think in
NZ that could do them for a more realistic price, but I=92ve lost all
the details of who they were.
>
> Has anyone used the carb mount rubbers from this company in the US?
> http://www.jbmindustries.com/912socket.html
>
> Again, the original Rotax part is half the price of a new engine so I
might be interested in buying some of these parts. It would be good to
know if anyone has any experience of them.
>
> Thanks all,
>
> Barry
> G-XPXP 912 Taildragger UK 1030hrs
>
>
>
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Pulsar-List Digest: 2 Msgs - 09/02/12 |
Aeropoxy pr2032/ph3660
Aeropoxy es6279a/b
Chuck
Pulsar iii
914TP
Sent from my iPad
On Sep 3, 2012, at 1:57 AM, Pulsar-List Digest Server <pulsar-list@matronics.com>
wrote:
> *
>
> =================================================
> Online Versions of Today's List Digest Archive
> =================================================
>
> Today's complete Pulsar-List Digest can also be found in either of the
> two Web Links listed below. The .html file includes the Digest formatted
> in HTML for viewing with a web browser and features Hyperlinked Indexes
> and Message Navigation. The .txt file includes the plain ASCII version
> of the Pulsar-List Digest and can be viewed with a generic text editor
> such as Notepad or with a web browser.
>
> HTML Version:
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 12-09-02&Archive=Pulsar
>
> Text Version:
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 12-09-02&Archive=Pulsar
>
>
> ===============================================
> EMail Version of Today's List Digest Archive
> ===============================================
>
>
> ----------------------------------------------------------
> Pulsar-List Digest Archive
> ---
> Total Messages Posted Sun 09/02/12: 2
> ----------------------------------------------------------
>
>
> Today's Message Index:
> ----------------------
>
> 1. 06:26 AM - Epolite 2315 replacement........ (mjb777)
> 2. 08:07 AM - Re: Epolite 2315 replacement........ (Dennis Adams)
>
>
>
> ________________________________ Message 1 _____________________________________
>
>
> Time: 06:26:39 AM PST US
> Subject: Pulsar-List: Epolite 2315 replacement........
> From: "mjb777" <mattbrock777@gmail.com>
>
>
> Hi all,
>
> Is there an "official" and time tested replacement epoxy system that has the
same
> or better specification for the Epolite 2315 product in layup wet out and strength,
> aluminium bonding strength, corrosion inhibiting and other requirements
> needed for the Pulsar kit?
>
> I see Aircraft Spruce have E-Z Poxy and its 3 hardeners listed as a replacement
> for Epolite but they do not mention 2315 in particular and the tech sheet provided
> does not mention Aluminium bonding qualities?
>
> Matt.
>
> --------
> Pulsar 1 TD Kit.
> Captain B777.
> Licenced Aircraft Maintenance Engineer.
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=382294#382294
>
>
> ________________________________ Message 2 _____________________________________
>
>
> Time: 08:07:11 AM PST US
> From: Dennis Adams <ghf4986@gmail.com>
> Subject: Re: Pulsar-List: Epolite 2315 replacement........
>
>
> Matt,
>
> I do not know if it official, but I and many others used Aeropoxy.
> http://www.ptm-w.com/index.asp?pgid=15
>
> Dennis
>
> Sent from an IPad
>
> On Sep 2, 2012, at 7:30 AM, mjb777 <mattbrock777@gmail.com> wrote:
>
>
> Hi all,
>
> Is there an "official" and time tested replacement epoxy system that
> has the same or better specification for the Epolite 2315 product in
> layup wet out and strength, aluminium bonding strength, corrosion
> inhibiting and other requirements needed for the Pulsar kit?
>
> I see Aircraft Spruce have E-Z Poxy and its 3 hardeners listed as a
> replacement for Epolite but they do not mention 2315 in particular and
> the tech sheet provided does not mention Aluminium bonding qualities?
>
> Matt.
>
> --------
> Pulsar 1 TD Kit.
> Captain B777.
> Licenced Aircraft Maintenance Engineer.
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=382294#382294
>
>
>
>
>
>
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|