Today's Message Index:
----------------------
1. 03:03 AM - Re: epoxy resin (Simon Goozee)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Hi in the UK we,re using west system 105 and either 205 or 206 hardener
I use 206, a bit slower.
----- Original Message -----
From: Emil Sr
To: pulsar-list@matronics.com
Sent: Tuesday, April 09, 2013 11:53 PM
Subject: Re: Pulsar-List: epoxy resin
On 4/9/2013 5:12 PM, desandas@gmail.com wrote:
Hi Pulsar drivers,
I need to do some glass work on my airplane ( pulsar # 504)
Will some one tell me witch epoxy resin i have to get from Spruse &
sp....(even the part number of it) for the resin to be compatible with
my pulsar??
It has been a very long time since i =9Dve build my airplane
and i have forgoten the type of resin that i have used.
Thanks for your time,
Denis Sandas, Greece
Hi Denis aeropoxy PH3660 hardner and PH2032 resin should do the trick
these are both aircraft spruce numbers. Emil Radtke N143NB Pulsar111
Jabiru 3300 engine
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|